Metra Electronics 95-5810 User manual

Category
Motor vehicle electronics
Type
User manual

Metra Electronics 95-5810 is a car radio installation kit designed for the 2003-2011 LINCOLN Town Car. It allows you to install a Double DIN aftermarket radio and/or stacked ISO mount units into your vehicle. The kit includes a Double DIN trim plate, Double DIN brackets, and all necessary mounting hardware.

Here are some of the features and benefits of the Metra Electronics 95-5810:

  • Easy installation - no cutting or modifications required
  • Allows you to install a Double DIN aftermarket radio or stacked ISO mount units
  • Includes all necessary mounting hardware
  • Made from high-quality materials for durability and long-lasting use

Metra Electronics 95-5810 is a car radio installation kit designed for the 2003-2011 LINCOLN Town Car. It allows you to install a Double DIN aftermarket radio and/or stacked ISO mount units into your vehicle. The kit includes a Double DIN trim plate, Double DIN brackets, and all necessary mounting hardware.

Here are some of the features and benefits of the Metra Electronics 95-5810:

  • Easy installation - no cutting or modifications required
  • Allows you to install a Double DIN aftermarket radio or stacked ISO mount units
  • Includes all necessary mounting hardware
  • Made from high-quality materials for durability and long-lasting use
INSTALLATION INSTRUCTIONS FOR PART 95-5810
95-5810
KIT FEATURES
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
A) Double DIN Trim Plate B) Double DIN Brackets
KIT COMPONENTS
A
Small Flat Blade Screwdriver/ Panel Removal Tool
Socket Set
1-800-221-0932
© COPYRIGHT 2007-2009 METRA ELECTRONICS CORPORATION
www.metraonline.com
TOOLS REQUIRED:
APPLICATIONS
LINCOLN Town Car
2003-2011
B
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
• 70-5520 - Ford harness 2003-up
• 70-5521 - Ford amp harness 2003-up
Antenna Adapter:
• Not required
Dash Disassembly
- LINCOLN Town Car 2003-2011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Kit Assembly
- Double DIN Radio Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
- Stacked ISO Mount Units Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Final Assembly
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
TABLE OF CONTENTS
95-5810
*Note:
Refer also to the instructions included with the aftermarket radio.
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take
steps toward a better tomorrow.
95-5810 DASH DISASSEMBLY
LINCOLN TOWN CAR 2003-2011
1
10
0
20
30
40
50
60
70
80
90
100
100
60
20
140
180
110
120
P
C
H
R
N
2
1
MPH
0.0
MILES
LINCOLN
Disconnect the negative battery ter-
minal to prevent an accidental short
circuit.
1
Remove (2) 7mm bolts facing upward
above instrument cluster/gauges.
(Figure A)
2
Carefully unsnap and remove dash
panel surrounding radio and instru-
ment cluster/gauges.
(Figure B)
3
Remove (2) 7mm bolts above clock
panel and remove panel).
(Figure C)
4
Remove (4) 7mm bolts securing radio.
5
Continue to kit assembly.
A
C
B
2
95-5810 KIT ASSEMBLY
B
A
DOUBLE DIN RADIO PROVISION
Attach the Double DIN brackets to the
aftermarket radio using the screws
supplied with the radio.
(Figure A)
1
Place the Double DIN trim plate over
the radio face then secure the entire
assembly into the sub dash.
(Figure B)
2
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
3
95-5810 KIT ASSEMBLY
B
A
STACKED ISO MOUNT UNITS PROVISION
Attach the Double DIN brackets to the
aftermarket units using the screws
supplied with the units.
(Figure A)
1
Place the Double DIN trim plate over
the unit faces then secure the entire
assembly into the sub dash.
(Figure B)
2
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
95-5810 FINAL ASSEMBLY
FINAL ASSEMBLY
(A) Strip wire ends back 1/2"
B) Twist ends together
C) Solder
D) Tape
A
B
C
D
Locate the factory wiring harness in the dash. Metra recommends using the
proper mating adapter and making connections as shown. (Isolate and individ-
ually tape off the ends of any unused wires to prevent electrical short circuit.)
Re-connect the negative battery terminal and test the unit for proper operation.
Reassemble radio and dash assemblies in reverse order of disassembly.
1
2
3
4
FINAL WIRING CONNECTIONS
Make wiring connections using the EIA color code chart shown below and the instructions included with the
head unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and
individually tape off ends of any unused wires to prevent electrical short circuit.
METRA / EIA WIRING CODE
12V Ignition / Acc. . . . . . . . . . Red
12V Batt / Memory. . . . . . . . . Yellow
Ground. . . . . . . . . . . . . . . . . . Black*
Power Antenna. . . . . . . . . . . . Blue
Amp Turn-On . . . . . . . . . . . . . Blue / White
Amp Ground. . . . . . . . . . . . . . Black / White
Illumination . . . . . . . . . . . . . . Orange
Dimmer . . . . . . . . . . . . . . . . . Orange / White
Right Front (+) . . . . . . . . . . . . Gray
Right Front (-). . . . . . . . . . . . . Gray/ Black
Left Front (+) . . . . . . . . . . . . . White
Left Front (-). . . . . . . . . . . . . . White / Black
Right Rear (+) . . . . . . . . . . . . Violet
Right Rear (-) . . . . . . . . . . . . . Violet / Black
Left Rear (+) . . . . . . . . . . . . . Green
*NOTE: When a Black wire is not present, ground radio to vehicle chassis.
All colors may not be present on all leads due to manufacturer’s specifications.
95-5810
NOTES
5
95-5810 INSTRUCTIONS
1-800-221-0932
REV. 11/18/10 © COPYRIGHT 2007-2009 METRA ELECTRONICS CORPORATION INST95-5810
www.metraonline.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Metra Electronics 95-5810 User manual

Category
Motor vehicle electronics
Type
User manual

Metra Electronics 95-5810 is a car radio installation kit designed for the 2003-2011 LINCOLN Town Car. It allows you to install a Double DIN aftermarket radio and/or stacked ISO mount units into your vehicle. The kit includes a Double DIN trim plate, Double DIN brackets, and all necessary mounting hardware.

Here are some of the features and benefits of the Metra Electronics 95-5810:

  • Easy installation - no cutting or modifications required
  • Allows you to install a Double DIN aftermarket radio or stacked ISO mount units
  • Includes all necessary mounting hardware
  • Made from high-quality materials for durability and long-lasting use

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI