afx light 15-1915 User manual

Category
Stroboscopes & disco lights
Type
User manual

This manual is also suitable for

afx light 15-1915 is a SPOT LED MOVING HEAD fixture with a variety of features and capabilities:

  • It has a 60W White LED light source and can produce 7 colors + white.
  • It has 6 rotating and 8 fixed gobos, allowing for a variety of visual effects.
  • The pan and tilt angles can be adjusted, with a maximum of 180° for pan and 90° for tilt.
  • The beam angle can be adjusted from 17° to 25°.
  • It has a maximum brightness of 24500 Lux.
  • It can be controlled via DMX, sound, auto-run, or master/slave modes.
  • It has 14 DMX channels.
  • It has a locking 3-pin XLR male socket for data input and a locking 3-pin DMX female socket for data output.

afx light 15-1915 is a SPOT LED MOVING HEAD fixture with a variety of features and capabilities:

  • It has a 60W White LED light source and can produce 7 colors + white.
  • It has 6 rotating and 8 fixed gobos, allowing for a variety of visual effects.
  • The pan and tilt angles can be adjusted, with a maximum of 180° for pan and 90° for tilt.
  • The beam angle can be adjusted from 17° to 25°.
  • It has a maximum brightness of 24500 Lux.
  • It can be controlled via DMX, sound, auto-run, or master/slave modes.
  • It has 14 DMX channels.
  • It has a locking 3-pin XLR male socket for data input and a locking 3-pin DMX female socket for data output.
©CopyrightLOTRONIC2013 SPOT60LEDPage1
S
S
P
P
O
O
T
T
L
L
E
E
D
D
M
M
O
O
V
V
I
I
N
N
G
G
H
H
E
E
A
A
D
D
L
L
Y
Y
R
R
E
E
A
A
L
L
E
E
D
D
S
S
P
P
O
O
T
T
SPOT60LED(151915)
USER
MANUAL
MANUELD’UTILISATION
IMPORTANTNOTE:Electricproductsmustnotbeputintohouseholdwaste.Pleasebringthemtoarecyclingcentre.Askyourlocalauthoritiesor
yourdealeraboutthewaytoproceed.
NOTEIMPORTANTE:Lesproduitsélectriquesnedoiventpasêtremisaurebutaveclesorduresménagères.Veuillezlesfairerecycler
ilexiste
©CopyrightLOTRONIC2013 SPOT60LEDPage2
1.BEFOREYOUBEGIN
UnpackingInstructions
Immediatelyuponreceivingafixture,carefullyunpackthecarton,checkthecontentstoensurethatallpartsare
presentandhavebeenreceivedingoodcondition.Notifythefreightcompanyimmediatelyandretainpacking
materialforinspectionifanypartsappeartobedamaged
fromshippingorthecartonitselfshowssignsof
mishandling.Keepthecartonandallpa cking materials.Intheeventthatafixturemustbereturnedtothefactory,it
isimportantthatthefixturebereturnedintheoriginalfactoryboxandpacking.
SafetyInstructions
Pleasereadtheseinstructionscarefully,theyincludeimportantinf ormationabouttheinstallation, usageand
maintenanceofthisproduct.
PleasekeepthisUserGuideforfuturereference.Ifyouselltheunittoanotheruser,besurethathealsoreceives
thisinstructionbooklet.
Alwaysmakesurethatyouare
connectingtothepropervoltage,andthatthelinevoltageyouareconnectingtois
nothigherthanthatstatedonthedecalorrearpanelofthefixture.
Thisproductisintendedforindooruseonly!
Topreventriskoffireorshock,donotexposefixture
torainormoisture.Makesuretherearenoflammable
materialsclosetotheunitwhileoperating.
Theunitmustbeinstalledinalocationwithadequateventilation,atleast20in(50cm)fromadjacentsurfaces.Be
surethatnoventilationslotsareblocked.
Alwaysdisconnectfrompowersourcebefore
servicingorreplacingfuseandbesuretoreplacewithsamefusesize
andtype.
Securefixturetofasteningdeviceusingasafetychain.Nevercarrythefixturesolelybyitshead.Useitscarrying
handles.
Maximumambienttemperature(Ta)is104°F(40°C).Donotoperatethe
fixtureattemperatureshigherthanthis.
Intheeventofaseriousoperatingproblem,stopusingtheunitimmediately.Nevertrytorepairtheunitby
yourself.Repairscarriedoutbyunskilledpeoplecanleadtodamageormalfunction.Pleasecontactthenearest
authorizedtechnicalassistancecenter.Alwaysusethe
sametypeofspareparts.
Don’tconnectthedevicetoadimmerpack.
Makesurethepowercordisnevercrimpedordamaged.
Neverdisconnectthepowercordbypullingortuggingonthecord.
Avoiddirecteyeexposuretothelightsourcewhileitis
on.
GB
©CopyrightLOTRONIC2013 SPOT60LEDPage3
SPECIFICATIONS
Volta g e : ..............................................................................................................100230Vac/5060Hz
Powerconsumption:......................................................................................................................................90W
Lightsource:.............................................................................................................1ledof60WWhite
Color:..................................................................................................................7color+white
Gobos:.......................................................................................................6Rotating+8fixed
Pan:....................................................................................................................180°,360°,540°
Tilt:.......................................................................................................................90°,180°,270°
Angle:...................................................................................................................17°to25°max
Brightness
:.........................................................................................................24500Luxmax
Function:..........................................So und
control,Autorun,Master/Slave,DMX
512,Strobe
Channel:..........................................................................................................14DMXchannels
Datainput....................................................................................Locking3pinXLRmalesocket
Dataoutput............................................................................Locking3pinDMXfemalesocket
Datapinconfiguration.................................................................Pin1shield,pin2(),pin3(+)
Dimensions.......................................................................................................246x348x250mm
N.W:................................................................................................................................... 6.5kg
SETUP
FuseReplacement
Withaflatheadscrewdriverwedgethefuseholderoutofitshousing.
Removethedamagedfusefromitsholderandreplacewithexactlythesametypeoffuse.
Insertthefuseholderbackinitsplaceandreconnectpower.
Thefuseislocatedinsidethiscompartment.Remove
usingaflatheadscrewdriver.
FixtureLinking
YouwillneedaserialdatalinktorunlightshowsofoneormorefixturesusingaDMX512controllerortorun
synchronizedshowsontwoormorefixturessettoamaster/slaveoperatingmode.Thecombinednumberof
channelsrequiredby
allfixturesonaserialdatalinkdeterminesthenumberoffixturesthatthedatalinkcan
support.
Important:Fixturesonaserial/datalinkmustbedaisychainedinonesingleline.Maximumrecommendedserial
datalinkdistance:500meters(1640ft.)Maximumrecommendednumberoffixturesonaserial
datalink:32fixtures
DataCabling
Tolinkfixturestogetheryoumustusedatacables.Ifyouchoosetocreateyourowncable,pleaseusedatagrade
cablesthatcancarryahighqualitysignalandarelesspronetoelectromagneticinterference.
CABLECONNECTORS
CablingmusthaveamaleXLR
connectorononeendandafemaleXLRconnectorontheotherend.
DMXconnectorconfiguration
Terminationreducessignalerrors.Toavoidsignaltransmissionproblemsandinterference,itisalwaysadvisableto
connectaDMXsignalterminator.
INPUT
COMMON
DMX+
DMX‐
Resistance120ohm
1/4wbetweenpin2
(DMX)andpin3
(DMX+)ofthelast
fixture.
©CopyrightLOTRONIC2013 SPOT60LEDPage4
CAUTION
Donotallowcontactbetweenthecommonandthefixture’schassisground.Groundingthecommoncancausea
groundloop,andyourfixturemayperformerratically.Testcableswithanohmmetertocheckcorrectpolarityand
tomakesurethepinsarenotgroundedorshortedtotheshield
oreachother.
3PINTO5PINCONVERSIONCHART
Note!Ifyouuseacontrollerwitha5pinDMXoutputconnector,youwillneedtousea5pinto3pinadapter.
Thechartbelowdetailsaproper cableconversion:
3PINTO5PINCONVERSION
CHART
Conductor 3PinFemale(output) 5PinMale(Input)
Ground/Shield Pin1Pin1
Data()signal Pin2Pin2
Data(+)signal Pin3Pin3
Donotuse Donotuse
Donotuse Donotuse
SettingupaDMXSerialDataLink
1.Connect
the(male)3pinconnectorsideoftheDMXcabletotheoutput(female)3pinconnectorofthecontroller.
2.Connecttheendofthecablecomingfromthecontrollerwhichwillhavea(female)3 pinconnectortotheinput
connectorofthenextfixtureconsistingofa(male)
3pinconnector.
3.Then,proceedtoconnectfromtheoutputasstatedabovetotheinputofthefollowingfixtureandsoon.
Master/SlaveFixtureLinking
1.Connectthe(male)3pinconnectersideoftheDMXcabletotheoutput(female)3pinconnecterofthefirst
fixture.
2.Connecttheendofthecablecomingfromthefirstfixturewhichwillhavea(female)3pinconnectertotheinpu t
connecterofthenextfixtureconsistingofa(male)3pinconnecter.Then,proceedtoconnectfromtheoutputas
statedabovetotheinputofthe
followingfixtureandsoon
Often,thesetupforMasterSlaveandStandaloneoperationrequiresthatthefirstfixtureinthechainbeinitialized
forthispurposeviaeithersettingsinthecontrolpanelorDIPswitches.Secondarily,thefixtures thatfollowmayalso
requireaslavesetting.
Pleaseconsultthe''OperatingInstructions»sectioninthismanualforcompleteinstructions
forthistypeofsetupandconfiguration.
©CopyrightLOTRONIC2013 SPOT60LEDPage5
OPERATINGINSTRUCTIONS
NavigationthroughtheControlPanel
AccesscontrolpanelfunctionsusingthefourpanelbuttonslocateddirectlyunderneaththeLCDDisplay.
Button Function
<MENU> Usedtoaccessthemenuortoreturntoapreviousmenuoption
<UP>
<DOWN>
Scrollsthroughmenuoptionsinascendingorder
Scrollsthroughmenuoptionsindescendingorder
<ENTER> Usedtoselectandstorethecurrentmenuoroptionwithinamenu
Whenamenufunctionisselected,thedisplaywillshowimmediatelythefirstavailableoptionfortheselectedmenu
function.Toselectamenuitem,press<ENTER>.
MENUMAP
Youhave4Mainmenu:RUN,EDIT,SPECIALandGENERAL.Useupanddownbuttonstoselectoneofthesemenus
andpressenterbuttontoenterinthemenu.
RUN(Selectionofoperatingmode).UseupanddownbuttonstoselectandEnterto
confirm
o DMX512(DMXmode)
o TEST(tocheckiftheLEDisOK)
o SLAVE(Tosetthemovingheadinslavemode)
o CUSTOM
o SOUND(Thesoundmode)
o AUTO1(Thefirstautomaticmode)
o AUTO
2(Thesecondautomaticmode)
EDIT(youcaneditaprogramorchangeorderofDMXchannels)
o PROGRAM(Toedittheautomaticprogram)UseupanddownbuttonstoselectandEntertoconfirm
SetSTEPnumberthenpressEnterbutton
Foreachstep,youcanadjustthevalueof:PAN,PANFINE,TILT,TILTFINE,SPEED,
DIMMER,STROBE,COLOR,FOCUS,GOBO1,ROT,GOBO2andPRISM.Youmustto
adjustalsothetimeofthestep(TIME)
Thenifyouwanttoaddthisstep
totheprogram,settheUSEparametertoYes
o CHANNELS(TochangetheorderoftheDMXchannels)
SelecttheDMXchannelnumberyouwanttochangethenpressENTER
AfterselecttheDMXchannelnumberyouwanttoreplacethenpressENTER
Note:Pleasedon’tchangetheDMXchannelorder.
©CopyrightLOTRONIC2013 SPOT60LEDPage6
SPECIAL(Youcancheckserialnumber,Loadthefactoryparameters,….)
o BLACKD(Tosetthemovingheadinblackoutmode)
o DMXERR
o SERIAL(ToshowtheserialnumberinLCDdisplay)
o FACTORY(Toloadthefactoryparameters).Thepassword
is0000
GENERAL(TosettheDMXaddress,tochoosetheDMXoperatemode,toadjustmicsensitivity,tosetPan
andTILT,…)
o ADDRESS(TosettheDMXaddressfrom001to512)
o PERSON(TochooseDMXoperatemode:11DMX
channelor14DMXchannels)
Note:Only14Channelsoperatingmodeisok.Nochangeifyouselect11channels
o INVERT(ToinvertPANandTILTmoves)
o LCDDISPLAY(TochooseiftheLCDalwayslightsonorlightsoffafter60s)
o SOUND(Tosetthesound
micsensitivity)
o DEFAULT(Toresetparameters)
AUTORUNMODE
OneoftwoAutoRunSubmodescanbeselectedwithachoiceofpresetspeeds.Thismodeenablestheunittoactas
aMastertootherSlaveunits
ChoosingAutoRunSubmodes
Pressthe“MENUbuttontodisplay“RUN”.PressENTERthanuse“UP”and
“DOWN”buttonstoselectAUTO1or
AUTO2
InitialLEDDisplay SecondLEDDisplay Submode
RUN AUTO1 Automode1
RUN AUTO2 Automode2
SOUNDACTIVATEDMODE
Theunitrespondstosoundspickedupbythebuiltinmicrophonetocreatealightshow.Thesoundchangesthe
colorandthepositionoftheeffect.ThismodeenablestheunittoactaMastertootherSlaveunits
SelectionofSoundActivatedmode
Pressthe
“MENUbuttonandchoose“RUN”.Whenthe“ENTER”buttonispressedtheLEDDisplaychangesto
“SOUND”andtheunitentersSoundActivatedMode.
InitialLEDDisplay SecondLEDDisplay Submode
RUN SOUND SoundActivated
©CopyrightLOTRONIC2013 SPOT60LEDPage7
SLAVEMODE
Upto32unitscanbedaisychainedtogetherwithonesingleunitactingasMasterandallotherlinkedunitsactingas
Slaves.Slaveunitswillallruninsyncwiththemasterunitwithouttheneedforanadditionalcontroller.Connections
canbemadeusingstandardDMX
controlcableswithMasterunitrunninginAutoRunorSoundActivatedModes
andplacedatthebeginningofthechain
SelectionofSlaveMode
Pressthe“MENUbuttonandchoose“RUN”.Whenthe“ENTER”buttonispressed,theLEDdisplaychangesto
“SLAVE”andtheunitwillbeslaved
tocontrolsignalscomingfromaMasterunit
DMXMODES
SettingDMXAddresses
Usethe“MENUbuttontodisplay“GENERAL”.PressENTERanduseUpandDownbuttonstoselectADDRESS”
thenpressENTER.Use“UP”and“DOWN”buttonsallowsindividualDMXaddressestobesetfrom“d001”to“d512”
DMXTAB LE
CHANNELS FUNCTION DMX Functions
1 Pan 000-255 0-540
2 Pan 16Bit 000-255 Pan fine
3 Tilt 000-255 0-270
4 Tilt 16Bit 000-255 Tilt fine
5 Pan & Tilt speed 000-255 Slow-fast
6 Dimmer 000-255 From dark to bright
7 Strobe 000-255 From slow to fast
8 Color wheel
000-255
0-29 red
30-49 green
50-69 blue
70-89 yellow
90-109 purple
110-129 simple green
130-149 simple blue
150-255 rainbow
9 Focus 000-255 From close to far
10
Rotating gobo
wheel
000-255 Gobo rotating from slow to fast and clockwise and un-
clockwise to turn
11 Gobo rotating 000-255 Gobo rotating from slow to fast
12 Static gobo wheel
000-255 The gobo wheel clockwise and un-clockwise to turn from
slow and fast
13 Triple prism
000-255 0-9,OFF
10-63 ON
64-159 clockwise from slow to fast
160-255 from fast to slow
14 Reset
000-255
reset200 stop 3second reset
©CopyrightLOTRONIC2013 SPOT60LEDPage8
PREPARATIFS
Déballage
Dèsréceptiondel’appareil,ouvrezlecartonetvérifiezquelecontenuestcompletetenbonétat.Sinon,prévenez
immédiatementletransporteuretconservezl’emballages’ilmontredessignesdemauvaistraitements.Conservezle
cartonettouslesmatériauxd’emballageafindepo uvoirtransporterl’appareilentoutesécurité.
Consignesdesécurité
Lisezattentivementcemanuelquicontientdesinformationsimportantessurl’installation,l’utilisationetl’entretien
decetappareil.
Conservezlemanuelpourréférenceultérieure.Sil’appareilchangeunjourdepropriétaire,assurezvousquele
nouvelutilisateurestenpossessiondumanuel.
Assurezvousquelatensionsecteurconvientà
cetappareiletqu’ellenedépassepaslatensiond’alimentation
indiquésurlaplaquesignalétiqu edel’appareil.
Uniquementpourutilisationàl’intérieur!
Afind’évitertoutrisqued’incendieoudechocélectrique,nepasexposercetappareilàlapluieouàl’hu midité.
Assurezvousqu’aucunobjetinflammablene
setrouveàproximitédel’appareilpendantsonfonctionnement.
Installezl’appareilàunendroitbien ventiléàunedistanceminimumde50cmdetoutesurface.Assurezvousque
lesfentesdeventilationnesontpasbloquées.
Débranchezl’appareildusecteuravanttoutemanipulationouentretien.Lorsquevousremplacezle
fusible,utilisez
uniquementunfusiblequiprésenteexactementlesmêmescaractéristiquesquel’ancien.
Sécurisezl’appareilsurledispositifdefixationaumoyend’unechaîne.Neportezjamaisl’appareilenletenantpar
leboîtier.Tenezleparl’étrier.
Latempératureambiantenedoitpasdépasser40°C.Nepas
fairefonctionnerl’appareilàdestempératures
supérieures.
Encasdedysfonctionnement,arrêtezimmédiatementl’appareil.N’essayezjamaisderéparerl’appareilparvous
même.Uneréparationmalfaitepeutentraînerdesdommagesetdesdysfonctionnements.Contactezunservice
techniqueagréé.Utilisezuniquementdespiècesdétachéesidentiquesauxpiècesd’origine.
Nepas
brancherl’appareilsurunvariateur.
Assurezvousquelecordond’alimentationn’estjamaisécraséniendommagé.
Nejamaisdébrancherl’appareilentirantsurlecordon.
Nepasexposervosyeuxàlasourcelumineuse.
F
©CopyrightLOTRONIC2013 SPOT60LEDPage9
CARACTERISTIQUES
Alimentation: ..........................................................................................................100230Vac/5060Hz
Consommation:................................................................................................................................................90W
Led:.............................................................................................................................1ledof60WWhite
Couleurs:............................................................................................................7color+white
Gobos:.......................................................................................................6Rotating+8fixed
Pan:....................................................................................................................180°,360°,540°
Tilt:.......................................................................................................................90°,180°,270°
Angle:...................................................................................................................17°to25°max
Luminosité:........................................................................................................
24500Luxmax
Fonction:..........................................So und
control,Autorun,Master/Slave,DMX
512,Strobe
CanauxDMX...................................................................................................14DMXchannels
EntréeDMX:..............................................................................Locking3pinXLRmalesocket
SortieDMX:..........................................................................Locking3pinDMXfemalesocket
Branchementconnecteur............................................................Pin1shield,pin2(),pin 3(+)
Dimensions:.....................................................................................................246x348x250mm
Poids:................................................................................................................................. 6.5kg
INSTALLATION
Débranchezlecordond’alimentationavantderemplacerlefusibleetutiliseztoujoursunfusibleayantlesmêmes
caractéristiquesquel’ancien.
Remplacementdufusible
Sortezleportefusibledesonlogementàl’aided’untournevisàlameplate.
Sortezlefusiblegrilléetremplacezleparunautreentouspoints
identiques.
Remettezleportefusibledanssonlogement etrebranchezl’appareilsurlesecteur.
Lefusiblesetrouveàl’intérieurdececompartiment.
Retirezleaumoyend’untournevisàlameplate.
Branchementdeplusieurseffets
Vousavezbesoind’uncâblededonnéessérielpourfairefonctionnerplusieurseffets au
moyend’unecommande
DMX512oupourfairefonctionnerdeuxouplusieurseffetsenmodemaître/esclave.Lenombrecombinédecanaux
requisparl’ensembledesappareilssuruncâblededonnéessérieldéfini t lenombred’appareilsquelecâblede
donnéespeutsupporter.
Important:Lesappareilsdoiventêtrebranchésensérie
suruneseuleligne.PourêtreconformeàlanormeEIA485il
nefautpasbrancherplusde32appareilssuruneligne.Siplusde32appareilssontbranchéssuruneseulelignede
donnéessériesansrépartiteurDMXàisolationoptique,lesignalnumériqueDMXrisqued’êtredétérior é.

Ladistancemaximalerecommandéeestde500m.Lenombremaximumd’appareilsbranchéssuruneliaisonde
donnéesestde32.
Câblage
Pourrelierdesappareilsensemble,vousdevezutiliserdescâblesdetransmissiondedonnées.Vouspouvezacheter
descâblesDMXcertifiésdirectementchezunrevendeur/distributeurouconstruirevospropres
câbles.Sivous
souhaitezfabriquerlecâblevousmême,utilisezdescâblesdedonnéesfaiblecapacitancedehautequalitéquisont
moinssujetsàdesinterférencesélectromagnétiques.
©CopyrightLOTRONIC2013 SPOT60LEDPage10
CONNECTEURSDECABLE
LecâbledoitposséderuneficheXLRmâled’uncôtéetXLRfemelledel’autre..
ConfigurationdesconnecteursDMX
Larésistancedefindeligneréduitleserreursdesignal.Pouréviterdesproblèmesdetransmissiondessignaux,ilest
toujoursconseillédebrancherunerésistance
defindeligneDMX.
ATTENTION
Ilnedoityavoiraucuncontactentrelecommunetlamasseduchâssisdel’appareil.Lamiseàlamasseducommun
peutprovoqueruneboucledemasseetvotreappareilfonctionned’unefaçonétrange.Testezlescâblesàl’aided’un
ohmmètre
afindevérifierlapolaritéetdevousassurerquelesbrochesnesontpasconnectéesàlamassenicourt
circuitéessurleblindageoumutuellement.
CHARTEDECONVERSION3PINEN5PIN
Attention!Sivousutilisezuncontrôleurmunid’unefichedesortieDMXà5
broches,vousdevezutiliserun
adaptateur5brochesen3broches.
Lachartecidessousmontreuneconversioncorrecte:
CHARTEDECONVERSION3PINEN5PIN
Conducteur 3PinFemelle(sortie) 5PinMâle(entrée)
Masse/blindage Pin1Pin1
Signaldonnées() Pin2Pin2
Signaldonnées
(+) Pin3Pin3
Nepasutiliser Nepasutiliser
Nepasutiliser Nepasutiliser
Miseenplaced’unelignededonnéesDMXensérie
1.Connectezlecôté(mâle)à3brochesducâbleDMXsurlasortie(femelle)à3brochesdelacommande.
2.Connectez
l’extrémitéducâbleprovenantducontrôleurquiauraunefichefemelleà3broches,surlafiche
d’entréedel’appareilsuivantquiestunconnecteurmâleà3bro ches
3.Ensuite,branchezlasortiecommeindiquécidessussurl’entréedel’appareilsuivant,etc.
BranchementMaître/Esclave
1.Connectezlecôté
mâleà3brochesducordonDMXsurlasortie(femelle)à3brochesdupremierappareil.
2.Connectezl’extrémitéducordonprovenantdupremierappareil(fichefemelleà3broches)surl’entréede
l’appareilsuivant(fichemâleà3broches).Branchezensuitelasortiedel’appareilsurl’entréedel’appareil
suivant,
etc.
Leréglagepourunfonctionnementenmaître/esclaveouautonomerequiertsouventuneinitialisationdupremier
appareildelachaînesoitparunparamétragedupanneaudecontrôle,soitpardescommutateursDIP.Parailleurs,
lesappareilspeuventégalementnécessiterunparamétrageenesclave.Veuillezconsulterlesinstructionsd’emploi
danscemanuelpouravoirdesins tructionscomplètespourcetyped’installationetdeconfi guration.
ENTREE
COMMUN
DMX+
DMX‐
Résistancede120Ω
1/4wentrepin2
(DMX)etpin3
(DMX+)surledernier
appareil
©CopyrightLOTRONIC2013 SPOT60LEDPage11
Montage
Vouspouvezinstallercetappareildansn’importequellepositionpourvuqu’ilyaituneventilationsuffisante.
FONCTIONNEMENT
Tableaudecommande
Accédezauxfonctionsdutableaudecommandeaumoyendesquatreboutonsquisetrouventjusteendessousde
l’écranLCD.
Bouton Fonction
<MENU> Accèsaumenuouretourversuneoption
précédentedumenu
<UP>
<DOWN>
Défilementdesoptionsdumenudansun
ordrecroissantoudécroissant
<ENTER>
Sélectionetenregistrementdumenuoude
l’optiondansunmenu
Appuyezàplusieursrepris essur<MENU>jusqu’àcequevousatteigniezlafonctiondésirée.Utilisezlesboutons
<UP>et<DOWN>pournaviguerdanslesoptionsdumenu.Appuyezsurlatouche<ENTER>poursélectionnerla
fonctionencoursd’affichageoupouractiveruneoptiondanslemenu.Pourrevenirsur
l’optionoulemenu
précédentsanschangerlavaleur,appuyezsurlatouche<MENU>.
MENU
Vousavez4menusprin cipaux:RUN,EDIT,SPECIALandGENERAL.UtilisezlesboutonsUpetDownpoursélectionner
unmenupuisappuyezsurEnterpourentrerdanscemenu
RUN(Sélection
dumodedefonctionnement).
o DMX512(ModeDMX)
o TEST(PourtestersilaledestOK)
o SLAVE(Poursélectionnerlemodeesclave)
o CUSTOM
o SOUND(Poursélectionnerlemodemusicale)
o AUTO1(Poursélectionnerlemodeauto
1)
o AUTO2(Poursélectionnerlemodeauto2)
EDIT(Vowspouvezéditerleprogrammeinterneoul’ordredescanauxDMX)
o PROGRAM(Pourcréerunprogramme)
Sélectionnerlenumérodepas(STEP)puispressezEnter
Pourchaquepas,vous
devezajusterlavaleurdesparamètressuivant:PAN,PAN
FINE,TILT,TILTFINE,SPEED,DIMMER,STROBE,COLOR,FOCUS,GOBO1,ROT,GOBO
2etPRISM.Vousdevezaussidéfinirladuréedupas(TIME)
©CopyrightLOTRONIC2013 SPOT60LEDPage12
Ensuite,sivousvoulezintégrercenouveaupasauprogramme,vousdevezajusterle
paramètreUSEsurYES
o CHANNELS(pourchangel’ordredescanauxDMX)
SélectionnezlenumérodecanalquevousvoulezdéplacerpuispressezENTER
Ensuitesélectionnezlenumérodecanalvous
souhaitezmettrelafonctionpuispressezsur
ENTER
Note:PleaseNousvousconseillonsdenepaschangerl’orderdescanaux
SPECIAL(Vowspouvezvisualiserlenumérodesérie,chargerlesparamètresusine,…)
o BLACKD(Pourpositionnerlalyreenblackout )
o DMXERR
o SERIAL(Pourafficherlenumérodesériedela
lyresurl’afficheur)
o FACTORY(pourchargerlesparamètresusine).Lemotdepasseest0000
GENERAL(pourajusterl’adresseDMX,inverserlesmouvementsPanetTilt,….)
o ADDRESS(Ajusterl’adresseDMXde001à512)
o PERSON(Poursélectionner
lefonctionnementdumodeDMX(11canauxou14canaux))
Note:seullemode14canauxfonctionne.pasdechangementsivoussélectionnerlemode11canaux
o INVERT(pourinverserlesmouvementsPANetTILT)
o LCDDISPLAY(Pourlectionnerlemodeafficheur:affichagecontinuouextinctionautoauboutde
60s)
o SOUND(
Pourajusterlasensibilitédumicro)
o DEFAULT(Poureffectuerunreset)
MODEAUTOMATIQUE
Choisissezl’undesdeuxsousmodesautomatiques.Cemodepermetégalementdedésignerl’appareilcomme
Maïtre.
Sélectiondusousmodeautomatique
Appuyezsur“MENU”pourafficher“RUN”.Ensuitesélectionnersoit«AUTO1»soit«AUTO2»”.Appuyezsur
ENTERpourconfirmerlasélection.
Affichageinitial Deuxième
affichage Sousmode
RUN AUTO1 ModeAuto1
RUN AUTO2 ModeAuto2
©CopyrightLOTRONIC2013 SPOT60LEDPage13
MODED’ACTIVATIONAUDIO
L’appareilréagitauxsonsperçusparlemicrophoneincorporépourcréerunspectacledelumière.Achaqueson
enregistréparlemicrophone,l’appareilréagitparunchangementdecouleuretdeposition.Danscemode
l’appareilagitenMaître.
Sélectiondumodeaudio
Appuyezsur“MENU”et
sélectionnez“RUN”.Lorsquelatouche“ENTER”estappuyé,l’afficheurindique“SOUND”
etl’appareilcommuteenmodeaudio.
Affichageinitial Deuxièmeaffichage Sousmode
RUN SOUD Modemusicale
MODEESCLAVE
Jusqu’à32appareilspeuventêtrereliesensembleetunappareilagitcommeMaître.LesEsclavesfonctionnentdela
mêmemanièrequeleMaître.Reliezlesappareilsaumoyend’uncordonDMX.LeMaîtrepeutfonctionnerenmode
automatiqueouactiveparlesonetdoitêtreplaceaudébut
delachaîne.
SélectiondumodeEsclave
Appuyezsur“MENU”etsélectionnez“RUN”.LorsquevousappuyezsurENTER,l’afficheurindique«SLAVE»et
l’appareilobéitauxsignauxqu’ilreçoitduMaître.
MODESDMX
RéglagedesaddressesDMX
Appuyezsur“MENU”pourafficher“GENERAL”.Ensuitesélectionnez«ADDRESS»puisappuyezsurENTER.Réglezles
adressesindividuellesde«d001”à“d512” aumoyendestouches“UP”et“DOWN”.
©CopyrightLOTRONIC2013 SPOT60LEDPage14
TABLEAUCANAUXDMX
CANAL FONCTION DMX Descritpion
1 Pan 000-255 0-540
2 Pan 16Bit 000-255 Pan fine
3 Tilt 000-255 0-270
4 Tilt 16Bit 000-255 Tilt fine
5 Vitesse Pan-Tilt 000-255 De lent à rapide
6 Dimmer 000-255 De sombre à fort
7 Strobe 000-255 DE lent à rapide
8 Color wheel
000-255
0-29 rouge
30-49 vert
50-69 bleu
70-89 jaune
90-109 viloet
110-129 Vert simple
130-149 Bleu simple
150-255 effet arc en ciel ( de lent à rapide )
9 Focus 000-255 De proche à loin
10 Roue gobo rotatif
000-255 Sélection manuel puis enchainement auto des gobos ( de
lent à rapide )
11 Rotation gobo 000-255 Rotation de lent à rapide
12 Roue gobo fixe
000-255 Sélection manuel puis enchainement auto des gobos ( de
lent à rapide )
13 Prisme
000-255 0-9 Off
10-63 On
64-159 Rotation horaire de lent à rapide
160-255 Rotation anti-horaire de rapide à lent
14 Reset
000-255
reset200 après 3 secondes
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

afx light 15-1915 User manual

Category
Stroboscopes & disco lights
Type
User manual
This manual is also suitable for

afx light 15-1915 is a SPOT LED MOVING HEAD fixture with a variety of features and capabilities:

  • It has a 60W White LED light source and can produce 7 colors + white.
  • It has 6 rotating and 8 fixed gobos, allowing for a variety of visual effects.
  • The pan and tilt angles can be adjusted, with a maximum of 180° for pan and 90° for tilt.
  • The beam angle can be adjusted from 17° to 25°.
  • It has a maximum brightness of 24500 Lux.
  • It can be controlled via DMX, sound, auto-run, or master/slave modes.
  • It has 14 DMX channels.
  • It has a locking 3-pin XLR male socket for data input and a locking 3-pin DMX female socket for data output.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages