Whirlpool ADG 3800 Program Chart

Whirlpool
Brand
Whirlpool
Model
ADG 3800
Category
Dishwashers
Type
Program Chart

Whirlpool ADG 3800 is a dishwasher that offers various features to make dishwashing easier and more efficient. It comes with multiple wash programs, including Rapid Plus for lightly soiled dishes, Eco for normal dirt, and Intensive for heavily soiled pots and pans. Additionally, it has an antibacterial rinse option to ensure maximum hygiene, a water softening system to prevent scale deposits, and a delayed start function to schedule washes at a convenient time. The dishwasher also includes an indicator for rinse aid and regeneration salt, ensuring optimal performance.

Whirlpool ADG 3800 is a dishwasher that offers various features to make dishwashing easier and more efficient. It comes with multiple wash programs, including Rapid Plus for lightly soiled dishes, Eco for normal dirt, and Intensive for heavily soiled pots and pans. Additionally, it has an antibacterial rinse option to ensure maximum hygiene, a water softening system to prevent scale deposits, and a delayed start function to schedule washes at a convenient time. The dishwasher also includes an indicator for rinse aid and regeneration salt, ensuring optimal performance.

5019 396 96037
GB
ADG 3800
Quick Reference Guide
Before using the dishwasher, read the user instructions!
(We reserve the right to make technical modifications)
Whirlpool is a registered trademark of Whirlpool USA
Add regeneration salt
Only add regeneration salt immediately before starting a
wash programme.
Add rinse aid
Half-load wash (top basket)
selection button
Press the button to select the option; the corresponding
indicator lights up. Press the button again to deactivate the
option; the corresponding indicator goes off.
Extra programmes button
To select one of the three extra programmes, press the
button after selecting the main programme (2, 3, 4); see
programme table.
The function remains stored.
Antibacterial rinse
(Sani Rinse option)
This function adds an antibacterial rinse at the end of the
wash cycle, guaranteeing a further reduction of bacteria.
The indicator light ups when the function is activated.
If a constant temperature is not maintained during the
antibacterial rinse cycle ( e.g. due to door opening or
power failure), the programme lights flash indicating that
the antibacterial action cannot be guaranteed.
“Delayed start” and “Water
hardness setting” button
To set the water hardness level, follow the instructions in
the enclosed handbook. The wash cycle can be
programmed to start after 1-9 hours. The delayed start
can be programmed either before or after selecting the
desired wash programme. When the door is closed, a pre-
wash cycle is run, after which the delayed start countdown
begins.
Water stop device activated
Switch off the dishwasher and contact the After-sales
Service.
The dishwasher over fills with water
Reset and start the programme again from the beginning.
If the problem persists, contact the After-Sales Service.
The water heating system is not
working
Reset and start the programme again from the beginning. If
the problem persists contact the Assistance Service.
Water heating anomaly
Reset and start the programme again from the
beginning. If the problem persists, contact the After-
Sales Service.
The dishwasher does not fill with water
Check the water supply and filters, and make sure
that there are no kinks in the water inlet hose. Open
and close the door in order to continue.
The dishwasher does not drain
Make sure that the filter unit and drain hose are not
clogged and if necessary clean them.
Flow meter
(if provided) anomaly
Reset and start the programme again from the beginning. If
the problem persists, contact the After-Sales Service.
Alternate washing system
(if provided) anomaly
Reset and start the programme again from the beginning. If
the problem persists, contact the After-Sales Service.
Fault in water load system
Switch off the dishwasher and contact the After-sales
Service.
(*) Extra functions available in all programmes, except prewash.
1) Reference programme for energy label in compliance with
Standard EN 50242 (top basket adjusted in top position);
2) Refer to “User instructions”;
3) Programme data obtained in conformity with European standard
EN 50242. The data may vary according to, for example,
different loads, water temperatures - above or below 15° C - or
water hardness and different power supply voltage, etc.
On/Off button.
Press the button to switch on the dishwasher. The indicator
of the last programme selected lights up; at the end of the
cycle a short acoustic signal sounds.
Programme selection button
Press the button to select a programme. The
corresponding indicator lights up.
Indicators
Extra functions (*)
Fault indicators
Indicators
Off
Flashing
On
Programme table
Detergent
2)
Consumption
3)
Programmes Loading instructions A B Litres kWh Minutes
Prewash cold
Dishes to be washed later. - - 6.0 0.03 16
Rapid Plus 45°C
Light dirt, e.g. glasses and cups. X - 13.0 0.85 45
Eco 55°C
Normal dirt. X - 17.0 1.05 140
Normal 65°C
Normal dirt or very dirty. X - 17.0 1.28 100
Intensive 70°C
Recommended programme for
very dirty dishes, particularly
recommended for pots and pans.
X X 24.0 1.75 115
+
Delicate 45°C
Light dirt with no dried-on food. X - 20.0 1.20 80
+
Bio
1)
55°C
Normal dirt. X - 17.0 1.08 180
+
Daily 65°C
Normal dirt or very dirty. X - 14.0 1.25 95
39696037GB.fm Page 1 Monday, February 20, 2006 12:37 PM
Black process 45.0° 150.0 LPI
How to use the appliance
For further indications refer to the individual sections of the user instructions.
Press the
On/Off
button.
Large compartment
A
.
Small compartment
B
.
Mechanical indicator
C
.
Electric indicator on control panel (if provided).
On models with water softener system
only.
Mechanical indicator
D
.
Electric indicator on control panel
(if provided).
Refer to the dishwasher loading instructions.
Press the button until the indicator of the required programme
lights up.
If necessary (and if provided).
The corresponding indicator lights up.
“Cancel”
Open the door, press until the
indicators 4 + 5 (marked by “end”
on the control panel) light up.
Close the door; after about 1 min.
the dishwasher cycle ends.
“Change the programme in
progress”
Open the door.
Select another programme and
close the door to start the new
cycle.
- Only open the dishwasher if
necessary (Warning: hot steam).
- If the appliance is switched off
during a wash cycle, when
switched on again it will resume
the cycle from where it was
interrupted.
At the end of the programme a short acoustic signal will sound.
The indicators 4 + 5 (marked by “end” on the control panel)
light up.
Open the door and press the
On/Off button
.
All the indicators go off.
Warning: When the door is opened steam comes out!
Unload the appliance, starting from the lower rack.
Open the door
How to fill the
detergent dispenser
BA
C
Check the rinse aid
Check the
regeneration salt
D
Load the racks
Select a programme
Select
extra functions
Close the door to start
the programme
Open the water cock
Wash cycle
Switch off the appliance
Close the water
cock, unload the racks
39696037GB.fm Page 2 Monday, February 20, 2006 12:37 PM
Black process 45.0° 150.0 LPI
Instruction for loading the dishwasher and racks provided
Upper basket:
Cup holders (A):
Depending on the position, raised or
lowered.
Place glasses in the middle and on
the right, dishes on the left, under
the cup holder racks.
Place long and narrow utensils
(carving forks, knives) on the
bottom of the rack, not
crosswise, with the sharp ends
towards the appliance.
Cutlery basket supports (B):
Depending on the position, raised or
lowered.
Rack height adjustment:
Release the stops (
B
) of both rack
rails.
Remove the rack.
Reposition the rack at the required
height.
Close the stops (
B
).
The rack must be level on both
sides.
Lower basket:
With tilting plate holders.
Cutlery basket:
It is equipped with grill elements (
C
) to
keep the cultery separated. It can be
divided into two parts, which is handy
for half-load washes or when there are
just a few pieces of cultery to be
washed.
Objects that can cause injuries
must be arranged in the rack with
tips facing downwards.
Only use dishwasher-proof dishes. Do not use the appliance for items not suitable for washing in a
dishwasher, for example wooden items, aluminium, plastic utensils, tin, hand-decorated dishes (unglazed),
silver cutlery.
ABAB
B
B
CC
C
C
39696037GB.fm Page 3 Monday, February 20, 2006 12:37 PM
Black process 45.0° 150.0 LPI
What to do if...
If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem
(* see also the corresponding chapter in the user instructions).
Problem Cause Cure
The appliance is not
working
• No water supply. • Open the water cock.
• The appliance does not load sufficient
water.
• Clean the water cock inlet filter.
• Ensure there are no kinks in the water hose.
• Power failure. • Insert the plug in the power socket.
•Open the door.
•Close the door.
• Check the house fuse.
If the dishes are not
perfectly dry
• Insufficient rinse aid. •Increase dosage *.
• Residual water in cavities. • Load dishes at an angle.
If the dishes are not
perfectly clean
• The water jet does not reach the
dishes.
• Arrange dishes so that they do not touch.
Arrange the dishes upside down.
• Insufficient detergent. • Follow recommended detergent dosage.
• Unsuitable programme. • Select a more intensive wash programme.
• Spray arms blocked. • The spray arms must be able to turn freely.
• Spray arm nozzles clogged. • Remove any impurities obstructing the water flow *.
• Detergent unsuitable/too old. • Use a good quality detergent.
Sandy or grainy
residues
• Clogged filters. • Check filters regularly/if necessary clean them *.
• Filters incorrectly assembled. • Refit and secure the filters, making sure they are
inserted correctly *.
Colour of plastic parts
faded
• Tomato/carrot juice,... • Depending on the material, if necessary use a
detergent with a greater whitening power.
Deposits on dishes
•removable • Streaks on dishes/glasses. • Decrease the rinse-aid dosage *.
• Layer of salt on dishes/glasses. • Close the salt container lid properly *.
• not removable • Insufficient water softening, scale
deposits.
• Change water hardness setting, if necessary add salt *.
Glasses dull/
not sparkling
• Cannot be washed in dishwasher. • Use suitable glasses.
Rust on cutlery
• Not made of stainless steel. •Use suitable cutlery.
If, after carrying out the above checks, the malfunction persists or appears again, switch the appliance off and close the
water cock, then call our Assistance Service (see warranty).
Before contacting the Assistance Service, make sure to have the following data available:
• The type of anomaly.
• The appliance type and model.
• The assistance code (the number indicated on the Technical
Assistance sticker) inside the door on the right side.
39696037GB.fm Page 4 Monday, February 20, 2006 12:37 PM
Black process 45.0° 150.0 LPI
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Whirlpool ADG 3800 Program Chart

Whirlpool
Brand
Whirlpool
Model
ADG 3800
Category
Dishwashers
Type
Program Chart

Whirlpool ADG 3800 is a dishwasher that offers various features to make dishwashing easier and more efficient. It comes with multiple wash programs, including Rapid Plus for lightly soiled dishes, Eco for normal dirt, and Intensive for heavily soiled pots and pans. Additionally, it has an antibacterial rinse option to ensure maximum hygiene, a water softening system to prevent scale deposits, and a delayed start function to schedule washes at a convenient time. The dishwasher also includes an indicator for rinse aid and regeneration salt, ensuring optimal performance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents