Whirlpool AWM 019 Program Chart

Brand: Whirlpool

Model: AWM 019

Category: Washing machines

Type: Program Chart

PROGRAMME GUIDE

*) Appliances with maximum spin speed greater than 900 rpm: for improved garment care, spin speed is restricted to 900 rpm.

**) The Programme Duration indicated is an approximate value for a programme with maximum temperature but without special options.

Indicator:

Water Stop

Indicator:

Door lock

Wash Rinse Spin

Start preselection

min

Time remaining

(if available)

Programme Care

label

Type of fabric /

Degree of soiling

Max.

Load

Detergent and

Additives

Selectable special options =

❉

Programme

Selector

Pro-

gramme

Duration

**)

Notes

Sof-

tener

Main

Wash

Pre

Wash

Energy

save

Quick

Wash

Intensive

Rinse

Hold

Pre Wash Spin

approx.

min.

Cotton

Slightly to normally soiled

bed linen, table linen,

underwear, towels, shirts etc.

made of cotton and linen

Normal 5,0

Quick

Wash 3,0

❉

yes

❉❉

❉

max °60

❉❉❉❉

Cotton

95°

115

Quick

Wash: 60

For heavily soiled washing,

Prewash can be selected in

addition. If “Quick Wash” is

selected, the “Energy save” special

option cannot be selected.

Cotton

Slightly to normally soiled

bed linen, table linen,

underwear, towels, shirts etc.

made of cotton and linen

Normal 5,0

Quick

Wash 3,0

❉

yes

❉❉ ❉ ❉ ❉❉ ❉

Cotton

60°, 40°, 30°

110

Quick

Wash: 60

For heavily soiled washing,

Prewash can be selected in

addition. If “Quick Wash” is

selected, the “Energy save” special

option cannot be selected.

Easy Care

Slightly to normally soiled

blouses, shirts, overalls

etc. made of polyester

(Diolen, Trevira),

polyamide (Perlon, Nylon)

or blends with cotton

Normal 2,5

Quick

Wash 1,5

❉

yes

❉❉ ❉ ❉ ❉❉

❉

Easy Care

60°,50°,

40°, 30°

Quick

Wash: 40

If “Quick Wash” is selected, the

“Energy save” special option

cannot be selected.

Delicates

Curtains, delicate dresses,

skirts, shirts, blouses

1,5

❉

yes

❉

—— —

❉❉

❉

Delicates

40°, 30°

45 —

Wool

Only woollens with a felt-free

finish, labelled with the

woolmark and identified as

machine washable

1,0

❉

yes

❉

—— —

❉❉

❉

Wool

40°

If you select “Rinse Hold”, do not

leave the wash in the rinsing

water for too long.

Rinse +

Spin

—5,0

❉

—— — —

❉❉

—

❉

Rinse + Spin

—

Programme for treating wash with

starch or softener. Subsequent spin

is intensive. Same as the spin cycle

in the Coloured Wash programme.

Gentle Spin — 5,0 — — — — — — — —

❉

Gentle Spin

—

Gentle Spin can be used in this

programme. Same as the spin

cycle in the Wool programme.

Drain — —————— ———— —

Empty only - do not spin.

Alternative way of terminating

programmes after “Rinse Hold”.

5019 100 03559

AWM 019

Prewash cycle increases programme duration by approx.15.

Consumption data were measured in normalised conditions in compliance with Standard IEC 60456.

The data on the energy label refers to the “Cotton 60°C” programme when using “Energy save” special option”.

Consumption values in the home may vary with respect to the values in the table depending on the water pressure,

the water supply temperature, the load and the type of wash.

*) The Time remaining indicator (if available) may also vary from the values in the table, since the particular house-

hold conditions are taken into account by the Time remaining indicator.

FOR DAILY USE:

1. Turn on the water supply tap.

2. Sort and load the laundry by fabric type and colour.

3. Close the door.

4. Add detergent and additives.

5. Select programme, temperature, special options.

6. The light above the “Start” button flashes. Press the “Start” button for about one second.

NOTE:

During the first 15 minutes of Cotton and Easy Care programmes (each without Prewash)

you can open the door to add items to the wash.

This is not possible with "Quick Wash".

CHANGING A PROGRAMME:

a) SELECT NEW PROGRAMME AND CONTINUE

1.Select new programme.

2.The light above the “Start” button flashes. Press the “Start” button for about one sec-

ond.

The new programme will continue from the same programme step where the running

programme was interrupted.

b) TO CANCEL A PROGRAMME THAT IS ALREADY RUNNING AND START A NEW

PROGRAMME

There's no need to add more detergent when you start the new programme, because no

water is drained out when you cancel a programme.

1.Hold down the “Start” button for five seconds, or until the programme control audibly

restarts and the time remaining indicator shows “0”.

2.Wait until the programme sequence indicator returns to the left.

3.Set the programme selector to “0”.

4.Set the programme selector to the new programme and select any new

special options you require.

5.The light above the “Start” button flashes. Press the “Start” button for about one second.

TO INTERRUPT THE PROGRAMME - PAUSE:

To interrupt the running programme for a certain period and continue it at a later time:

1. Set the programme selector to “0”.

2. Set the programme again after the desired pause.

3. Press “Start” button for about one second.

TROUBLESHOOTING GUIDE:

Your washing machine is equipped with automatic safety functions for the early detection

and indication of any possible faults, and for reacting appropriately.

Often these are no more than minor problems that can be solved quickly. Examples of

these are:

• The appliance fails to start.

• Aftertreatment agents not fully washed in.

• The appliance vibrates during the spin cycle.

• Load not completely spun at the end of the programme.

Advice on these points can be found in the instructions for use in the “Troubleshooting

Guide” section.

What to do if the washing machine safety system detects a fault.

The programme is interrupted and the various indicators show the fault:

Programme Temperature Max. Load Special

Option

Water Energy Programme

Duration *)

(°C) (kg) (l) (kWh) (Min.)

Cotton 95 5

—

57 1,70 115

Cotton 95 5 Energy save 49 1,10 120

Cotton 60 5 Energy save 49 0,95 125

Cotton 60 5

—

49 1,10 110

Cotton 60 2,5

—

38 0,90 105

Cotton 40 5

—

49 0,55 95

Cotton 30 3 Quick Wash 32 0,25 45

Easy Care 60 2,5

—

59 0,70 90

Easy Care 40 2,5

—

53 0,50 80

Easy Care 30 1,5 Quick Wash 36 0,20 35

Delicates 40 1,5

—

55 0,50 50

Wool 40 1,0

—

55 0,50 40

INDICATOR LAMPS FLASH DIGITAL DISPLAY

(if available)

WHAT TO DO?

Proceed as per the instructions in

the following section...

“Start” and “Water Stop” Time remaining

(a number between 15 and 99)

“Fault in water supply”

“Speed”, “Water Stop”, “Time

remaining”, “Start preselection”

E1 “Fault in water supply”

“Speed”, “Water Stop”, “Time

remaining”, “Start preselection”

E3 “Fault when draining”

“Speed”, “Time remaining”, “Start

preselection” flash

E4 or E5 or E6 or E7 or E8 or E9 “Fault in an electrical

component”

For appliances with Water Stop:

“Speed”, “Water Stop”, “Time

remaining”, “Start preselection”

E2 “Water Stop fault”

Power and water consumption data

Whirlpool AWM 019 Program Chart

Brand: Whirlpool

Model: AWM 019

Category: Washing machines

Type: Program Chart

Download PDF

report

Whirlpool AWM 019 Program Chart

Whirlpool AWM 019 Program Chart

Related papers

Other documents