AWA Mezzo CVC 3800 User manual

AWA
Brand
AWA
Model
Mezzo CVC 3800
Category
Vacuum cleaners
Type
User manual
USERS MANUAL CYCLONIC VACUUM CLEANER
Model: CVC 3800
Cyclonic Vacuum Cleaner
Thank you for choosing to purchase one of our MEZZO products, we appreciate your business and believe that
we have provided you with a product that is both reliable and value for money. We encourage you and your
friends to choose from our range of MEZZO products again in future.
PACKAGE CONTENTS
1 Cyclonic Vacuum Cleaner
1 Telescopic Chrome Tubes
1 Standard Floor Brush
1 Air Turbo Floor Brush
1 Removable Dust Canister with filters (will be fixed to unit)
1 Accessory Brush Attachment (including removable Brush)
1 Long Nozzle Attachment
1 Rear Filter (will be fixed to unit)
1 Instruction manual
Confirm all parts before disposing of carton.
SAFETY INSTRUCTIONS
Carefully read this manual before using this appliance. Make sure that you know how the appliance functions and
how to operate it. Maintain the appliance in accordance with the instructions to ensure that it functions properly.
Keep this manual with the appliance. If the appliance is to be used by a third party, this instruction manual must
be supplied with it. The safety instructions, by themselves, do not eliminate danger completely, and proper
accident prevention measures must always be used.
For any customer query or in the unlikely event of a product failure, please phone or
email the helpline contact details below for assistance.
DO NOT RETURN THE PRODUCT TO THE RETAILER.
Toll Free Help line: 1300 366 144
Email: info@telefixsales.com.au
1
BEFORE INITIAL USE
Remove all packaging. Check for any damage that may have occurred during transit. Do not use if the appliance
is damaged in any way or if the supply cord is damaged. Immediately return to supplier for replacement or repair.
PARTS DESCRIPTION
This appliance has been designed for general indoor household use only. Disconnect from the power supply
when not in use.
2
REMOVABLE DUST CANISTER
OPERATION
Connecting the Vacuum Hose
Uncoil the Vacuum Hose and connect to the Cyclonic Vacuum Cleaner by inserting the Plug end into the socket,
with the square side of the Plug end facing upwards (see diagram on page 4).
3
To remove the Vacuum Hose from the Cyclonic Vacuum Cleaner, push the release button on the top of the Plug
end of the Vacuum Hose and pull gently away from the Socket.
Attaching the Floor Brush to the Telescopic Tubes
Extend the Telescopic Chrome Tubes by pressing the black button in the direction of the arrow, and pulling on
the end of the Tubes also in the same direction of the arrow on the black button. When you have reached the
optimal length for the Tubes, release the black button and a click noise will be heard. This means that the Tubes
are now locked in this position.
To shorten the Tubes for storage, press the black button in the direction of the arrow, and push the two ends of
the tubes together.
To attach the floor Brush to the extended Tubes, insert the larger end of the Chrome Tubes over the connection
end of the Floor Brush and push together firmly.
To separate the Floor Brush from the Tubes, pull in opposite directions with a slight twisting action, being
careful not to damage the connection end of the Floor Brush.
4
Supply Cord Connection and Rewind
Carefully pull the supply cord from the vacuum cleaner. Note. There is a “Yellow” indicator on the cord that
indicates the optimum length. Warning! Do not pull the supply cord fully out past the “Red” indicator
mark. This may cause damage long term to the rewind mechanism.
Insert the supply plug into a suitable 230-240V ~ 50Hz power outlet socket. The Cyclonic Vacuum Cleaner is
now ready for use.
To rewind the supply cord simply press the rewind button while guiding the supply cord into the appliance.
Rewind Button
Red
Yellow
Switching Power ON
Press the ON / OFF button to commence vacuuming.
ON/OFF Switch
5
Electronic Suction Control
To adjust the Electronic Suction Control, slide the Suction Control button forward or backwards.
NOTE: There is also a manual suction control located on the handle of the Vacuum Cleaner Hose. Keep this shut
for the strongest suction.
Accessory Brush Attachment
The accessory brush may be used as either a small nozzle or a small brush. To remove brush simply slide
outwards as indicated below.
USING THE FLOOR BRUSH
The Standard Floor Brush has two settings:
Bristles Up: In this setting the bristles are pushed up inside the brush. This setting should be used for carpet
only. Do not use this setting on polished wooden floors, as it will scratch the surface.
Bristles Down: In this setting the bristles are extended from the Floor Brush. This setting should be used for hard
floors.
To change the Standard Floor Brush settings, push down the levers on the top of the Floor Brush.
6
USING THE AIR TURBO BRUSH
The Air Turbo Brush uses the Vacuum Cleaners’ Suction to spin the built-in brushes inside the Air Turbo Brush.
This creates a stronger suction power to remove more dust and dirt from carpet.
The Air Turbo Brush should not be used on Wooden, or Hard Covered Floors, as it may scratch the floors
surface.
Remove the Floor Brush from the end of the Telescopic Chrome Tubes, and attach the Air Turbo Brush in the
same way that is shown to attach the Standard Floor Brush.
On the top of the Air Turbo Brush there is a suction control adjustment. Have this closed for the strongest
suction.
Note: There is a removable panel on the base of the Air Turbo Brush. If the Air Turbo Brush becomes jammed,
removing this panel may help to clear the blockage. Warning: Always make sure the Vacuum Cleaner is
unplugged from the wall socket before attempting to clear a blockage.
Note: It is advisable to remove the Air Turbo Brush when storing your Cyclonic Vacuum Cleaner, as Cyclonic
Vacuum Cleaner will not store upright with the Air Turbo Brush attached.
VACUUM SAFETY
Do not vacuum fine abrasive dust particles such as cement dust, lime or gib board residue as these may damage
the motor.
Do not vacuum lighted cigarettes, embers, cinders or hot ash.
Do not vacuum pins, string, large objects that may block the hose, sharp objects or liquids of any type.
Do not use outdoors.
Use care when using on any stairway.
Warning: When picking up the Vacuum Cleaner, always use the silver fold-down handle. Never pick the
unit up by the blue Dust Canister handle, as this may damage the Vacuum Cleaner.
ELECTRICAL SAFETY
When using electric appliances always observe safety regulations where applicable to reduce the risk of fire,
electric shock and personal injury.
Always check that the power supply corresponds to the voltage on the rating plate.
7
ELECTRICAL SAFETY (Continued)
Supply cord and plug.
Always fully unwind any supply cord to avoid overheating. Never allow the supply cord to come in contact with
hot objects. Do not carry the appliance by the cord or yank the cord to disconnect it from the mains supply.
Disconnect by first switching off the outlet, grasping the plug and pulling it out gently. Do not let the supply cord
hang over the edge of a table or counter.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified
person in order to avoid a hazard.
Children.
This appliance is not intended for use by young children or infirm persons Young children must be supervised by
a responsible person to ensure that they can operate the appliance safely. Young children must be supervised to
ensure that they do not play with the appliance.
Water.
Do not immerse. Do not immerse any part of this appliance or supply cord in water or other liquid. Do not use
with wet hands or use in damp situations.
Handling.
Do not drop the appliance. Do not use this appliance if it has been damaged in any way, immersed in water, the
supply cord is damaged or the operation is faulty. Contact with any damaged appliance could result in electric
shock.
Unattended.
Do not leave the appliance unattended while in use. Disconnect from the power supply.
Consider the environment.
Do not use in damp or wet conditions. Do not use without adequate light. Do not use near flammable or
hazardous materials. Do not use outdoors. Do not leave unattended while connected to the power supply.
Damaged or dropped.
Always inspect your vacuum before use. Do not use this vacuum if it has been damaged, dropped, left outdoors
or dropped in water. Return it to an authorised service dealer for examination and repair. Do not attempt to
service this appliance yourself. Refer servicing to qualified service personnel.
Store in a safe place
When not in use store your vacuum and all its accessories and instruction manual in a safe and dry place.
Liability.
No liability can be accepted for any damage or personal injury caused by non-compliance with these instructions
or any other improper use or mishandling. This appliance is intended for household use only.
8
CARE AND CLEANING
Before cleaning.
When not in use or before cleaning, always disconnect the vacuum from the mains supply.
Cleaning guide.
Regularly clean the outside of the vacuum with a soft damp cloth and dry it with a dry towel. Do not immerse in
water. Do not use harsh solvents to clean the plastic components.
Emptying the Dust Canister
Regularly empty the dust canister. Press the Dust Cup Release Button to release the dust canister. Hold the dust
canister over a suitable waste container or bag, and the press Dust Cup Bottom Release Button to open the lower
door of the dust container. Close the lower door by pushing the door back up and again pressing the Dust Cup
Bottom Release Button. Check that the lower door is shut securely.
Remove the lid of the dust container by pushing the Dust Cup Lid Release Button located above the dust
container handle. To replace the lid, hold down the Dust Cup Lid Release Button, and fit the lid back on securely,
making sure the lip of the dust cup is located into the slot on the opposite side from the handle.
When you have emptied the dust canister and replaced the lid, reinsert it back onto the main body of the Cyclonic
Vacuum Cleaner making sure that it locks into place.
9
Cleaning the Nylon and Hepa Filters
Remove the Dust Canister (as described above). Open the Dust Canister by pushing the Dust Cap Release Button
located above the Dust Canister handle (as shown below).
Remove the Nylon Filter by simply grasping the Nylon Filter and pulling it down the black plastic tube. The
Nylon filter can be cleaned with a soft brush or rinsed in running water.
Remove the silver cap by holding the black tube with one hand, and pulling the cap off. Then remove the blue
Hepa Filter from it’s enclosure so that it can be cleaned. The Hepa filter can be cleaned by rinsing in luke-warm
water. Warning! Both filters must be completely dry before installing.
Dust Cup
Release Button
Cleaning the Rear Filter
The Rear Filter is located at the back of the Cyclonic Vacuum Cleaner. Remove the rear grid by pressing the
release button located at the top of the grid. Remove the filter and rinse clean in water. Dry fully before
installing.
Storage
When not in use store the appliance, accessories and these instructions in a dry place.
The Cyclonic Vacuum Cleaner can be stored upright for convenient storage in a closet of cupboard. Note: The
Cyclonic Vacuum Cleaner cannot be stored upright with the Air Turbo Brush Attached.
10
TECHNICAL SPECIFICATIONS
Supply Voltage 220-240 V AC 50 Hz
Power Input 1400 watt nominal
1600 watt maximum
11
WARRANTY CARD
This product is guaranteed against faulty materials and workmanship for a period of twelve months from the date
of purchase. This warranty becomes void if the product has been tampered with, damaged by accident, damaged
in any other way by improper use or has been purchased second hand. All production orders have quality
inspections.
For any customer query or in the unlikely event of a product failure, please phone or
email the helpline contact details below for assistance.
DO NOT RETURN THE PRODUCT TO THE RETAILER.
WARRANTY FOR APPLIANCES USED COMMERCIALLY LIMITED TO 90 DAYS
Product: ______________________________________________________
Model No.: _____________________________________ Purchase Date:_________
Product Purchased From: ________________________________________________
_________________________________________________________________________
Your Name: _____________________________________________________________
Address: ________________________________________________________________
______________________________________________ Phone Number: __________
IMPORTANT!
Please retain this warranty card along with your purchase receipt. Please do not post to the
retailer
Toll Free Help line: 1300 366 144
Email: info@telefixsales.com.au
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

AWA Mezzo CVC 3800 User manual

AWA
Brand
AWA
Model
Mezzo CVC 3800
Category
Vacuum cleaners
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents