Whirlpool AKM 613/AL Program Chart

Whirlpool
Brand
Whirlpool
Model
AKM 613/AL
Type
Program Chart

This manual is also suitable for

5019 319 60152/A
AKM 613 PRODUCT DESCRIPTION SHEET
PL CZ SK HU BU RO RU
FR
To use the hob, turn the knob(s) clockwise and set
it/them to the required power.
To turn the hob off, turn the knob(s) back to
position
0
.
The hob is fitted with residual heat indicators. These
light up when the cooking zones reach temperatures
that could cause burns. These indicators remains alight
after the cooking zones are switched off, and turn off
only when the zones are no longer hot enough to be
dangerous.
A special device allows the knobs to be raised by about
1 cm, for cleaning the cooking zones below. After
cleaning, return the knob to the original position.
Important:
To avoid permanently damaging the glass-ceramic top,
do not use:
- Pots with bottoms that are not perfectly flat.
- Metal pots with enamelled bottom.
DIMENSIONS OF THE COOKTOP AND WORKTOP
ELECTRICAL CONNECTION
1.
Radiating cooking zone Ø 145, 1200 W
2.
Radiating cooking zone Ø 180, 1700 W
3.
Radiating cooking zone Ø 145, 1200 W
4.
Radiating cooking zone Ø 180, 1700 W
5.
Residual heat indicator
6.
Mains indicator light
7.
Front left cooking zone control knob
8.
Rear left cooking zone control knob
9.
Rear right cooking zone control knob
10.
Front right cooking zone control knob
Clean the cooktop frame with warm water and neutral solution only.
Do not use corrosive and/or abrasive substances which could damage the enamelled surface.
Supply voltage
Cables
(number and size)
230 V ~
3 X 2.5 mm
2
230 V 3 ~ +
4 X 1.5 mm
2
400 V 3N ~ +
5 X 1.5 mm
2
400 V 2N ~ +
4 X 1.5 mm
2
  • Page 1 1

Whirlpool AKM 613/AL Program Chart

Whirlpool
Brand
Whirlpool
Model
AKM 613/AL
Type
Program Chart
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents