CLS Lina Clip HP Owner's manual
- Category
- Coaxial cables
- Type
- Owner's manual
CLS Lina Clip HP is a LED fixture that can be used for floor, wall, or ceiling mounting. It comes with a variety of lenses (14º, 16º, 30º, 42º, 120º & 36º x 14º) and color temperatures (2700K, 3000K, and 4000K).
The fixture is dimmable using 1-10V, phase, or DALI protocols. With a lifespan of 50,000 hours, it is a durable and long-lasting lighting solution.
It is also Bluetooth controlled by Casambi, allowing for easy control and customization of lighting scenes. The fixture has an IP40 rating, making it suitable for indoor use.
Here are some possible use cases for the CLS Lina Clip HP:
- Accent lighting for artwork or architectural features
CLS Lina Clip HP is a LED fixture that can be used for floor, wall, or ceiling mounting. It comes with a variety of lenses (14º, 16º, 30º, 42º, 120º & 36º x 14º) and color temperatures (2700K, 3000K, and 4000K).
The fixture is dimmable using 1-10V, phase, or DALI protocols. With a lifespan of 50,000 hours, it is a durable and long-lasting lighting solution.
It is also Bluetooth controlled by Casambi, allowing for easy control and customization of lighting scenes. The fixture has an IP40 rating, making it suitable for indoor use.
Here are some possible use cases for the CLS Lina Clip HP:
- Accent lighting for artwork or architectural features
www.cls-led.com www.cls-led.com
2
CeilingWallFloor 180º 50.000 h 120º 36º x 14ºLuxeon/Cree IP40
500 mA 8W / 25cm Phase
dimmable
4000K
CRI>80
14º16º 30º 42º
1-10V
dimmable
2700K
Ceiling 180º 150 cm 50.000 h120º Luxeon/Cree IP40 24 VDC 6W / 25cm 1-10V
dimmable
2700K 4000K
WallFloor
Clip MP
Clip HP
150 cm
DMX
dimmable
3000K
DRIVER
EXCLUDED
DRIVER
EXTERNAL
DRIVER
EXCLUDED
DRIVER
EXTERNAL
# 58093-HP
CLS LINA CLIP HPCLS LINA CLIP HP
Manual V2.6 - August 2021
INDEX
Index 2
Safety information 2
Content 2
Technical 3
Specifications 3
Installation 4
WIring diagram non dim driver 5
CONTENT
SAFETY INFORMATION
Always switch o mains power
of the driver before connecting
or maintaining any fixtures!
Qualified
technician
Ambiance
Max. 40º
Do not stare
into the LED
Block access
below the work
area when
maintaining
the unit
Use a source
of AC power
that complies to
local electrical
codes
Make sure all
connectors are
connected
properly
Don’t install in
a flammable
or explosive
area
Warning!
Some surfaces
can be hot
Don’t modify
or install
genuine parts
on this product
CeilingWallFloor 180º 50.000 h 120º 36º x 14ºLuxeon/Cree IP40
500 mA 8W / 25cm Phase
dimmable
4000K
CRI>80
14º16º 30º 42º
1-10V
dimmable
2700K
Ceiling 180º 150 cm 50.000 h120º Luxeon/Cree IP40 24 VDC 6W / 25cm 1-10V
dimmable
2700K 4000K
WallFloor
Clip MP
Clip HP
150 cm
DMX
dimmable
3000K
DRIVER
EXCLUDED
DRIVER
EXTERNAL
DRIVER
EXCLUDED
DRIVER
EXTERNAL
Wiring diagram Mains dim driver 7
Wiring diagram 1-10V dim driver 8
Wiring diagram Casambi Bluetooth 9
Wiring diagram DALI dim driver 10
Accessories 11
List of symbols 12
www.cls-led.com www.cls-led.com
3 4
28 mm
20 mm
A*
41 mm
AModel
296 mm Lina Clip HP 30 cm
546 mm Lina Clip HP 55 cm
796 mm Lina Clip HP 80 cm
Tools
TECHNICAL
SPECIFICATIONS
LED: Cree / Luxeon
Available colours: 2700K, 3000K & 4000K
Power supply: 500mA
Power consumption: Max. 8 Watt / 25 cm
Lenses: 14º, 16º, 30º, 42º, 120º & 36º x 14º
Housing: Black anodised aluminium,
White coated
Cable length: 150 cm
Ambient temperature: -20º C till +40º C
INSTALLATION
1
3 4
2
5 6
90º
90º
- 90º / + 90º
Max.
3,5 mm
3,5 mm
www.cls-led.com www.cls-led.com
65
WIRING DIAGRAM NON DIM DRIVER
120 ~180 cm cable
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Lina Clip HP total cable length is max. 10 m
120 ~ 180 cm cable
115 mm
34 mm
CLS Lina Clip HP
# LC-X-XXX-XX-X
Length Min. Max.
30 cm 1 1
55 cm - -
80 cm - -
Number of Lina Clip HP on the CLS ND 001
CLS ND 001, non dimmable, 700mA driver
19 x 115 x 34 mm (hxwxd)
CLS ND 004
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Lina Clip HP total cable length is max. 10 m
120 ~180 cm cable
120 ~ 180 cm cable
129,5 mm
42 mm
CLS Lina Clip HP
# LC-X-XXX-XX-X
Length Min. Max.
30 cm 1 2
55 cm 1 1
80 cm - -
Number of Lina Clip HP on the CLS ND 004
CLS ND 004, non dimmable, 250-1050mA driver
30 x 129,5 x 42 mm (hxwxd)
Always switch off mains power of the driver before connecting any fixtures!
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Lina Clip HP total cable length is max. 10 m
CLS ND UNI, non dimmable, 300-1050mA driver
22 x 146 x 43 mm (hxwxd)
120 ~180 cm cable
120 ~ 180 cm cable
146 mm
43 mm
CLS ND UNI
CLS Lina Clip HP
# LC-X-XXX-XX-X
Length Min. Max.
30 cm 1 2
55 cm 1 1
80 cm - -
Number of Lina Clip HP on the CLS CD UNI
Always switch off mains power of the driver before connecting any fixtures!
www.cls-led.com www.cls-led.com
7 8
WIRING DIAGRAM 1-10V DIM DRIVER
Installation wire 2 x 0.5 mm2
Driver till last Lina Clip HP
total cable length is max. 10 m
CLS VD 001
0-10 V
80,5 mm (w)
80,5 mm (h)
CLS Dimmer electr. 1-10V
# 872010
L
N
120 ~180 cm cable
* 150 cm cable
Max. 12 pieces of VD 001 on
1 CLS Dimmer electr. 1-10V
52 mm
100 mm
CLS Lina Clip HP
# LC-X-XXX-XX-X
Length Min. Max.
30 cm 1 2
55 cm 1 1
80 cm - -
Number of Lina Clip HP on the CLS VD 001
CLS VD 001, 1-10V dimmable, 350-900mA driver
22 x 100 x 52 mm (hxwxd)
Installation wire 2 x 0.5 mm2
Driver till last Lina Clip HP
total cable length is max. 10 m
0-10 V
80,5 mm (w)
80,5 mm (h)
CLS Dimmer electr. 1-10V
# 872010
L
N
120 ~180 cm cable
* 150 cm cable
Max. 12 pieces of VD 004 on
1 CLS Dimmer electr. 1-10V
CLS VD 004
67 mm
100 mm
CLS Lina Clip HP
# LC-X-XXX-XX-X
Length Min. Max.
30 cm 1 2
55 cm 1 1
80 cm 1 1
Number of Lina Clip HP on the CLS VD 004
CLS VD 004, 1-10V dimmable, 350-900mA driver
21 x 103 x 67 mm (hxwxd)
Always switch off mains power of the driver before connecting any fixtures!
WIRING DIAGRAM MAINS DIM DRIVER
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Lina Clip HP total cable length is max. 10 m
120 ~180 cm cable
CLS Dimmer Jung phase cut
max. 270VA 230-240VAC
# 872019
80,5 mm (w)
80,5 mm (h)
L
N
Max. 12 pieces of MD 004 on
1 CLS dimmer Jung phase-cut
CLS MD 004
46 mm
166 mm
CLS Lina Clip HP
# LC-X-XXX-XX-X
Length Min. Max.
30 cm 1 2
55 cm 1 1
80 cm 1 1
Number of Lina Clip HP on the CLS MD 004
CLS MD 004, mains dimmable, 250-700mA driver
34 x 166 x 46 mm (hxwxd)
Always switch off mains power of the driver before connecting any fixtures!
www.cls-led.com www.cls-led.com
9 10
120 ~180 cm cable
Max. 12 pieces of VD 008 on
1 CLS Dimmer electr. 1-10V
CLS VD 008
Installation wire 2 x 0.5 mm2
Driver till last Lina Clip HP
total cable length is max. 10 m
0-10 V
80,5 mm (w)
80,5 mm (h)
CLS Dimmer electr. 1-10V
# 872010
L
N
* 150 cm cable
79 mm
124 mm
CLS Lina Clip HP
# LC-X-XXX-XX-X
Length Min. Max.
30 cm 1 6
55 cm 1 3
80 cm 1 2
Number of Lina Clip HP on the CLS VD 008
CLS VD 008, 1-10V dimmable, 250-700mA driver
22 x 124 x 79 mm (hxwxd)
Always switch off mains power of the driver before connecting any fixtures!
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Lina Clip HP total cable length is max. 10 m
CLS CD UNI, Casambi Bluetooth, 350-700mA driver
30 x 108 x 44 mm (hxwxd)
120 ~180 cm cable
120 ~ 180 cm cable
108 mm
44 mm
CLS CD UNI
Length Min. Max.
30 cm 1 3
55 cm 1 1
80 cm 1 1
Number of Lina Clip HP on the CLS CD UNI
CLS Lina Clip HP
# LC-X-XXX-XX-X
WIRING DIAGRAM CASAMBI BLUETOOTH CONTROL
WIRING DIAGRAM DALI DIM DRIVER
Installation wire 2 x 0.5 mm2
Driver till last Lina Clip HP
total cable length is max. 10 m
CLS DD 001
120 ~180 cm cable
120 ~180 cm cable
* 150 cm cable
DA1DA2
Controller
Supporting DALI
CLS Lina Clip HP
# LC-X-XXX-XX-X
52 mm
100 mm
Length Min. Max.
30 cm 1 2
55 cm 1 1
80 cm - -
Number of Lina Clip HP on the CLS DD 001
CLS DD 001, DALI dimmable, 250-700mA driver
22 x 100 x 52 mm (hxwxd)
Installation wire 2 x 0.5 mm2
Driver till last Lina Clip HP
total cable length is max. 10 m
120 ~180 cm cable
* 150 cm cable
DA1DA2
Controller
Supporting DALI
CLS DD 004
67 mm
103 mm
CLS Lina Clip HP
# LC-X-XXX-XX-X
Length Min. Max.
30 cm 1 2
55 cm 1 1
80 cm 1 1
Number of Lina Clip HP on the CLS DD 004
CLS DD 004, DALI dimmable, 350-700mA driver
21 x 103 x 67 mm (hxwxd)
Always switch off mains power of the driver before connecting any fixtures!
www.cls-led.com www.cls-led.com
11 12
ACCESSORIES
2020 CLS-LED BV. All rights reserved. Information subject to change without notice, CLS-LED BV and all aliated companies disclaim
liability for injury, damage direct or indirect loss, consequential or economic loss or any other loss occasioned by the use of, inability to
use or reliance on the information contained in this manual. No part of this manual may be reproduced, in any form or by any means,
without permission in writing from CLS-LED BV. Other legal information can be found in our General conditions, found on the back of
your CLS-LED BV invoice, inside the CLS catalogue or on our website www.cls-led.com/General-Terms.pdf
ACCESSORIES
113002 CLS LDC-41 GIII DMX LED dimmer 4 Ch. 0.35-1A per channel
87129900 CLS SmartConnect 2-fold junctionbox & shortcircuit connect.
87129905 CLS SmartConnect 6-fold junctionbox & shortcircuit connect.
87129915 CLS SmartConnect short circuit plugs (10pcs)
87129959 CLS SmartConnect extensioncable betw. 2 junctionboxes
872010 CLS Dimmer electr. 1-10V
872019 CLS Dimmer Jung phase cut max. 270VA 230-240VAC
874004 CLS ND 004 non dim, 198 - 264 V, 250-1050mA driver
874003 CLS ND UNI non dim driver, 220 - 240 V, 300-1050mA driver
874104 CLS MD 004 mains dim. 198-264V, 250-700mA driver
874201 CLS VD 001, 1-10V dim, 99-264 V, 350-900mA driver
874204 CLS VD 004, 1-10V dim, 99-264 V, 350-900mA driver
874208 CLS VD 008, 1-10V dim, 99-264 V, 250-700mA driver
874301 CLS DD 001, DALI dim, 99-264 V, 250-700mA driver
874304 CLS DD 004, DALI dim, 99-264 V, 350-700mA driver
875014 CLS CD UNI driver, 230V, Casambi Bluetooth control, 300-700mA driver
911367 CLS LDC SmartConnect block LDC to SmartConnect system
LIST OF SYMBOLS
Multiple connection
Daisychain connectivity
Installation depth
In centimeters
Swivel
Fixture is horizontally rotatable,
indicated in degrees
Swivel
Fixture is vertically rotatable,
indicated in degrees
Installation size
In centimeters
Application area
Indoor or outdoor
Application area
Floor, wall or ceiling
Protection class
One, two or three
Cable length
Maximum cable attached
to the fixture in centimeters
Lifespan
Of the light source in hours
Driver
Inclusive or exclusive
Internal or external
Pressure
Maximum pressure on the
fixture in kg/cm2
Weight
In grams/kilograms
Curve
Minimal bending curve
in centimeters
LED pitch
Pitch between the LEDs
in millimeters
Power supply
In VDC, VAC or milliAmpere
Power consumption
In VA or Watt
IP value
Ingress Protection classifies the
degrees of protection provided against
the intrusion of the product
Cutting length
Indicated by the cutting
marks
LEDs
Kind of LED used in the
fixture
Lenses
Availble lenses,
indicated in degrees
Performance Zoom
Adjustable beam angle
Plug & play
Easy connection using the
SmartConnect system
White colour temperature
In dierent Kelvin values;
Cold white, neutral white, warm
white or extra warm white
Colour
Available colours;
Amber, blue, red or green
Colour changing
RGB, RGB-W, RGB-A,
AWB or Tunable White
DMX input
Fixture works on DMX512
protocol or Wireless DMX
Magno dimming
Accurate dimming from
100 - 1% by using a magnet
Dynamic Control
Dynamic Power Control or
Dynamic Temperature Control
Combined product
Compose your own fixture
Warranty
3 or 5 years warranty on
the product
Energy label
Conformité Européenne
CE marking for free marketability
of industrial goods within the EU
r
h
ø w d
Dimmable
1-10 Volt, Phase, individual,
DMX dimmable or DALI
DRIVER
INCLUDED
DRIVER
EXTERNAL
Retail & Food LED modules
Clothing, furniture, kitchens, jewellery,
shoes, bread, meat, fish and
vegetables & fruit.
Lightsource
Equipped with a CLS, Citizen or a Xicato
LED module
Bluetooth controlled
By Casambi
PWM dimming
Traditional PWM dimming, DMX analog
or DMX Hybrid dim
CLS
DYNAMIC
COLOUR
COB
-
1
-
2
-
3
-
4
-
5
-
6
CLS Lina Clip HP Owner's manual
- Category
- Coaxial cables
- Type
- Owner's manual
CLS Lina Clip HP is a LED fixture that can be used for floor, wall, or ceiling mounting. It comes with a variety of lenses (14º, 16º, 30º, 42º, 120º & 36º x 14º) and color temperatures (2700K, 3000K, and 4000K).
The fixture is dimmable using 1-10V, phase, or DALI protocols. With a lifespan of 50,000 hours, it is a durable and long-lasting lighting solution.
It is also Bluetooth controlled by Casambi, allowing for easy control and customization of lighting scenes. The fixture has an IP40 rating, making it suitable for indoor use.
Here are some possible use cases for the CLS Lina Clip HP:
- Accent lighting for artwork or architectural features
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
CLS Lina Clip DF Owner's manual
-
CLS Lina Suspended DF Owner's manual
-
CLS Ultima Owner's manual
-
CLS Focus Micro Owner's manual
-
CLS Luxo 3 Basic CoB Owner's manual
-
CLS FLORENCE GIII Owner's manual
-
CLS Florence GIII Bracket Owner's manual
-
CLS Focus GIII Owner's manual
-
CLS Focus HP Spot Owner's manual
-
CLS Emerald M Owner's manual
Other documents
-
NUOGUAN NG240WUFOP User manual
-
DIODE LED CASAMBI Controllers User guide
-
AIMOTION Plug and Play Mesh Repeater Operating instructions
-
Sunricher SR-2400AMP User manual
-
SKYDANCE DA-PS-L User manual
-
-
-
-
-
SKYDANCE DH User manual
