Accent Builders Hardware DS-8001SC/SS Installation guide

DS#8001

Description:"Wall/Door"Mount"Bumper

Material:"Stainless"Steel"and"Rubber"

Size:5(Diameter)"38"x"(Height)"75mm"

Finishing:"Polished"Stainless"Steel"or"Brushed"Stainless"Steel

Packaging:51pc+Fasteners/polybag

Installation5Instructions:

1."Make"a"pencil"mark"of"a"desired"spot"where"the"bumper"fasteners"will"be"installed"on"the"baseboard"

of"the"wall"or"door."

2."At"those"spots,"drill"holes"for"the"screws.""If"wall"is"masonry,"drill"hole"with"carbide"bit"and"insert"

anchor."

3."Insert"bumper"screw"into"position."

*Tip:""Wall/Door"mount"bumpers"may"also"function"as"a"hanger.