2. Displays2go
  3. DGTCH22KS

Displays2go DGTCH22KS Assembly Instructions

  • Hello! I've reviewed the instructions for the Digital screen stand M2XBASECRD. This document outlines the steps to assemble the stand, attach the cord management channel, mount the digital screen, and route the power cable. I'm here to help with any questions you might have about these instructions.
  • What is the first step in assembling the stand?
    What should I do with the red liner on the tape?
    Where do I mount the digital screen?
    What is the last step?
SKU: M2XBASECRD
INSTRUCTIONS: HOW TO FIX POWER CORD TO THE POLE
Step 1: Assemble the height adjustable pole
with the base.
Step 2: Peel off the red protective liner on
the tape. Attach the cord management
channel to the pole and press down firmly.
Step 3: Mount the 22” digital screen at top
of the stand.
Step 4: Feed power cable into the cord
management channel.
/