SPECIFICATIONS
Display: ½˝high,6-digitLCD
Timingcapacity: 23hr,59mm,59sec
Resolution: 1sec
Accuracy: 0.01%
Size,weight: 2½x3¼x½,2¼oz
FEATURES
• Multi-functioncountdowntimer,thecount-uptimer,and
theclockindependentlyorsimultaneously.
• VoiceAnnouncementmaybeusedintheCount-down
modetoannouncethetimeremainingtozero,and
the“over”timeafterthecount-downexpires.Alsoan-
nouncestimeofdaywhileinClockmode.Thisfeature
maybedeactivatedifdesired.
• AutoRepeatautomaticallyrestartsthecountdownafter
reachingzerowhiletheunitisinCountdownmode
(see“ActivatingAutoRepeat”section).
• AlarmSoundspermitsettingsixuniquealarmsfor
varioustimedactivities(see“SelectingAlarmSounds”
section).
• Visualanduniqueaudiblealarmsforquickidentica-
tion.
• Memorypermitsstoringonecountdowntimetouse
repeatedly,withoutresettingthetime.
• Clip,magneticback,andstandforbestpositioning.
DISPLAY MODES
Thesingle-linedisplayhasindicatorstotrackwhichof
thefourmodesareactive:CountUp,CountDown,Clock,
andClockSet.Totogglebetweenthesemodes,slidethe
modeswitchlocatedontherightsideoftheunit.
CLEARING THE DISPLAY TO ZERO
WhileinCount-upandCountdownmodes,stopthetiming
withSTART/STOPbutton,thenpresstheCLEARbutton.
CLOCK OPERATION
Setting clock
1. SlidethemodeswitchtoCLOCKSETposition(Clock
“Set”indicatorashes).
2. PressHRS,MIN,andSECbuttonstosetthehours,
minutes,andsecondsrespectively.Avoiceannounces
theenteredvalueifthevoicefeatureisactive.Press
andholdbuttonsforrapidadvancement.(A“PM”
indicatortellswhetherthetimesetisp.m.ora.m.)
3. Whenthecorrecttimeappearsonthedisplay,slidethe
modeswitchtotheCLOCKposition.
Announcing the time of day
WiththemodeswitchsetatCLOCKposition,pressing
anybutton(exceptVOICEON/OFF)willannouncethe
currenttime.
COUNTDOWN TIMER OPERATION
Setting/Starting a countdown time
1. SlidethemodeswitchtotheCOUNTDOWNposition.
2. PressHRS,MIN,andSECbuttonstosetthecount-
downtime.Avoiceannouncestheenteredvalueifthe
voicefeatureisactive.Pressandholdbuttonsforrapid
advancement.
3. Oncethedesiredcountdowntimeappearsonthedis-
play,presstheSTART/STOPbuttontobegincounting
down.Duringcountdowntimingwhenthevoicefeature
isactive,avoicereportshowmuchtimeremains
untilreachingzero(see“CountdownVoiceReporting
Frequency”section).
Note:Anunlimitednumberoftime-outsmaybetaken.
See“Time-Outs”section.
4. Whenthecountdownexpires,theselectedalarm
sounds,a“Time’sUp”messageashes,andthe
displaybeginscountinguptoshowtheamountof
timeexpiredsincealarming.Thealarmwillcontinue
soundingfor1minuteunlesssilencedmanually.Press
anybuttontosilencethesoundingalarm.
Note:Afterthecountdownexpiresandthetimerbegins
countingup,TalkingTimerannounceshowmuchtime
haspassedsincealarming,suchas,“2minutesover,”
“3minutesover,”etc.Thisreportingfollowsthesame
frequencyasshowninthe“CountdownVoiceReporting
Frequency”section.Differentalarmsareemployedwhen
theunit’sAutoRepeatfunctionisused.See“Activating
AutoRepeat”section.
5. Afterstoppingthecountdown,clearthedisplaytozero
bypressingtheCLEARbutton.
Countdown voice reporting frequency
WhileinCountdownmodewiththevoicefeatureactive,
TalkingTimerannouncesthetimeremainingtozero
atregularintervalswhilecountingdown,suchas,“10
minutesleft,”“5minutesleft,”“10,”“9”...“1.”Seethe
followingtableforannouncementfrequency.
Time remaining to zero Voice reporting frequency
Time>60min everyhour
<60minto>10min every10min
<10minto>Imin every1min
<1minto>10sec every10sec
<10secto>1sec every1sec
ACTIVATING/DEACTIVATING VOICE
ANNOUNCEMENT
1. Slideopenthefrontbottomone-thirdoftheunit’s
casetorevealtheVOICEON/OFFbutton.Dothisby
graspingeachsideofthebottom,ridgedportionofthe
caseandslidingitawayfromthemaincase.
Note:Afterrepeateduse,casewillbecomeeasierto
open.
2. PresstheVOICEON/OFFbuttonuntil“ ”symbol
appearsonthedisplaytoindicatethevoicefeature
hasbeendeactivated.AnotherpressoftheVOICE
ON/OFFbuttonactivatesthevoicefeature,andthe“
”symboldisappears.
Note:Evenifthevoicefeatureisturnedoff,theselected
alarmwillsoundwhenthedisplayreacheszeroduring
countdowntiming.
ACTIVATING AUTO REPEAT
TalkingTimer’sautorepeatfunctionautomaticallyreturns
thedisplaytothepresetcountdowntimeandbegins
countingdownagainwhenthecountdownreacheszero.
1. SlidethemodeswitchtotheCOUNTDOWNposition.
2. PressHRS,MIN,andSECbuttonstosetthecount-
downtime.Avoiceannouncestheenteredvalueifthe
voicefeatureisactive.Pressandholdbuttonsforrapid
advancement.
3. Slideopenthefrontbottomone-thirdoftheunit’scase
torevealtheREPEATswitch.
4. SlideREPEATswitchtotheONposition.“ ”
indicatorappearstosignaltheAutoRepeatfunctionis
active.
5. PressSTART/STOPbuttontostartthecountdown.
Unitannouncesthetimeremainingtozeroifthevoice
featureisactive.Whenthecountdownexpires,the
alarmsounds,andthepresetcountdownbeginsagain
automatically.Thisauto-repeatingcontinuesuntil
stoppedmanually.
Note:Dependingonthecountdowntimeset,differentalarms
willbeusedwhiletheAutoRepeatfunctionisactivated.See
thefollowingtableforanexplanation.
Countdown time set Alarm reaches zero
Time>2min Selectedalarmsoundsfor1
minunlessmanuallysilenced
<2minto>10sec Beepstwice
<10sec Voicefeatureactive,nobeep;
voicefeatureoff,beepstwice
6. PressSTART/STOPbuttontohaltthecountdown.
ClearthedisplaytozerobypressingCLEARbutton.
7. TurnoffAutoRepeatfunctionbyslidingtheREPEAT
switchtotheOFFposition.
MEMORY OPERATION
TalkingTimerisequippedwithamemoryfeaturethat
permitsstoringacountdowntimewhichmayberecalled
withasinglepressoftheMEMORYbutton.Useitto
storeafrequentlyusedcountdowntime.
Storing a countdown time in memory
1. SlidethemodeswitchtotheCOUNTDOWNposition.
2. PressHRS,MIN,andSECbuttonstosetthecount-
downtime.Avoiceannouncestheenteredvalueif
thevoicefeatureisactive.Pressandholdbuttonsfor
rapidadvancement.
3. Oncethedesiredcountdowntimeappearsonthe
display,presstheMEMORYbuttontostorethesetting.
(Asteady“Memory”indicatorappears.)
Recalling memory
1. WhileintheCountdownmode,verifyacountdown
timeisstoredinmemorybyviewingthesteady“Mem-
ory”indicator.
2. PressMEMORYbuttontorecallthepresetcountdown
time.The“Memory”indicatorashes.
3. PressSTART/STOPbuttontobegincountdown.
Clearing memory
1. WhileintheCountdownmode,verifyacountdown
timeisstoredinmemorybyviewingthesteady“Mem-
ory”indicator.
2. PressMEMORYbuttontorecallthepresetcountdown
time.The“Memory”indicatorashes.
3. Whilethe“Memory”indicatorashes,pressthe
CLEARbuttontoclearthememoryanddisplayto
zero.
COUNT-UP TIMER (STOPWATCH) OPERATION
Starting a count up
1. SlidethemodeswitchtotheCOUNTUPposition.
2. PressSTART/STOPbuttontobegincountingup.
Note:Anunlimitednumberoftime-outsmaybetaken.
See“Time-Outs”section.
3. Thecountupwillcontinueuntilstopped.Haltthecount
upbypressingtheSTART/STOPbutton.
4.Withthecountupstopped,presstheCLEARbuttonto
returnthedisplaytozero.
CONTINUOUS TIMING
Themaximumcount-uptimeis23hr,59min,59sec.Af-
terreaching23hr,59min,59sec,TalkingTimerrollsover
automaticallyandcontinuestimingfromzero.Fortiming
thatlastsover24hours,simplycounthowmanytimesthe
unithasrolledoverandcontinuedtiming.
TIME-OUTS
Ifapauseinthecountdownorcount-uptimingoperation
isrequired,presstheSTART/STOPbuttonto“freeze”the
displayatthecurrentreading(time-out).Toresumetiming
fromthepointitwasstopped,presstheSTART/STOP