Precautions
☞ Whenever you change the mounting position of the product, adjust the camera angle and check the video recording to ensure
accurate video capturing.
☞ Excessively dark window tinting can hinder normal video recording.
☞ Use the power cable provided by the manufacturer to ensure normal functionality.
☞ Viewing or operating the product while driving can lead to an accident. Use the product only while the vehicle is stationary.
☞ This product's cameras may not be able to record smooth images in the event of a sudden change in the brightness level
(such as when entering a tunnel) or under extreme conditions such as shooting directly into the midday sun and shooting in the
darkness of the night with no sufficient light sources in the vicinity.
☞ Certain impact events may not be severe enough to trigger video recording.
☞ In the event of an accident, images may not be recorded if the product has been damaged or the power supply has been disrupted.
☞ Product damage due to an accident or any other cause may result in failure to record video data and/or file errors.
☞ Unauthorized disassembly, repair, and modification of the product may lead to product damage and/or malfunction.
The consumer is solely responsible for any product defect or issue arising thereof.
☞ Liquids and metallic objects entering inside the product can pose electric shock, fire, and electric leakage hazards. If this occurs,
turn off the product, unplug the power cable, and contact the service center.
Proper Product Use
☞ Insert/remove the micro SD card only after powering the main unit off. Inserting/removing the micro SD card while the unit is
powered on can cause serious errors. In addition, removing the micro SD card while recording is in progress can corrupt recording
data and damage the card itself.
☞ Format the micro SD card and perform a virus check at least once a week to prevent potential data recording failures.
☞ Use authorized micro SD cards only.
☞ The warranty period is 3 months for the micro SD card, 6 months for the accessories, and 1 year for the main unit.
☞ Using a micro SD card that contains existing data can lead to errors. Delete all existing data before use.
☞ Frequently check the recordings and format the micro SD card at least once a week (File System: FAT32/32bit).
☞ Replace the micro SD card if it is not recognized when connected to a computer or cannot be formatted properly.
☞ Using a micro SD card that contains existing data can lead to errors. Delete all existing data before use.
☞ The manufacturer claims no responsibility for data stored on to the micro SD card.
☞ Regularly check the data stored on the micro SD card and the internal memory to ensure normal recording performance.
This product has been designed as an in-vehicle recording device. Do not use for purposes other than as intended.
The manufacturer is not responsible for any product defect or issue resulting from negligent use or care of the product
by the consumer.
Proper micro SD Card Use
After unpacking the product, check inside and make sure all accessories are included. (Refer to images below)
If the product or any of its accessories is damaged or defective, please contact your retailer. (Actual components may differ from the
images below.)
※ Actual components may differ from the images above.
Accessories described in this manual are subject to change without prior notice for quality improvement purposes.
※ The external GPS module is sold separately and is available for purchase at your retailer.
Main Unit Rear Camera & Extension Cable
Constant Power Cable Cigarette Jack Cable
or
Power Cable
Accessories
micro SD Card micro SD Card Adapter Clips Quick Guide
Product Overview
Main Unit
Power Cable Connector
Rear Camera Connector
External GPS Antenna
Connector
Debugging Port
Servicing Port (do not
open.)
Reset Button
If the black box becom
es unresponsive during
use, press this button
to reboot the device.
Micro SD Card Sl
ot
Status LED
Blue
Recording LED
Red
Power/Manual Recording Button
Press and hold to turn the power o
n/off.
Short press to start manual recordin
g.
Security LED
Flashing
security indicat
or.
Built-In Microphone
# The actual component may differ from the images above.
Installation
[Correct Installation Angle]
1/3 of Vertical Space
2/3 of Vertical Space
¾ = Dynamic Area
¼ = Fixed Area
Distant Area
[Screen Ratio: Correct Installation Angle]
[Incorrect Installation Angle]
Distant Area
Dynamic Area
2/3 of Vertical Space
1/3 of Vertical Space
[Screen Ratio: Incorrect Installation Angle]
Product Use
[Front/Rear Preview]
∙ Tap ① to bring up the menu. The screen automatically reverts to
recording mode after 10 seconds of inactivity.
∙ Tap ② to flip between front and rear camera feeds.
Caution)
If a micro SD card has not been inserted, the screen will not turn on. Instead, the black box will repeatedly ask you to
Check the micro SD card. The black box will function normally once a micro SD card has been inserted.
If you receive the same message even with a micro SD card inserted into the black box, try removing the card and inserting it again.
If the problem persists, replace the micro SD card or contact the service center.
①
②
① Infinite/Parking Mode Selection
② Video Recording Playback
③ Volume Adjustment (0 - 5)
④ Settings
⑤ Parking Mode Event Count
⑥ GPS Status
⑦ Software Version
⑧ Time & Date
Displays retrieved time and date when connected to GPS.
Displays the system's time and date when not connected to GPS.
(System time and date can be configured under Settings.)
⑨ LCD Off
Tap on the LCD screen to turn the screen back on.
Menu
Menu
[Terminology]
∙ Infinite: Captures 1-minute recordings while the vehicle is on the move.
∙ Parking Event: Starts to record whenever impact is detected while the vehicle is parked (20 seconds leading up
to and 20 seconds after the impact).
∙ Parking Infinite: Captures 1-minute recordings while the vehicle is parked.
∙ Manual: Manual recording initiated by the user.
①②
③④
⑤⑥
⑦
⑧
⑨
Channel
∙ Choose between Front/Rear and Front.
∙ Front/Rear: Displays video feeds from front and rear cameras on a single screen.
Front camera feed takes up the bulk of the screen, with the rear camera feed shown as a
small window on the upper right corner. Tap on the PIP window to flip between
the channels. (For more information, refer to "Front/Rear Preview" section on page 6.)
∙ Front: Displays video feed from the front camera only (full screen). Video from the
rear camera is not recorded.
Settings_Video & Channel
Video
∙ Choose the desired picture quality (High, Medium, Low).
∙ "High" produces the best picture quality at the cost of recording capacity, whereas
"Low" increases the recording capacity at the cost of picture quality.
∙ Once the recording capacity of each type of recording data is reached, oldest data is
overwritten with new data. Back up the recording data on to a separate storage device
on a regular basis.
LCD Off
∙ Configure LCD timeout.
∙ Tap on the LCD Off icon to cycle through 30 secs, 1 min, 5 mins, Clock, and Always On
in that order. The LCD automatically turns off after the specified amount of time.
To turn the LCD back on, simply tap on it.
∙ "Clock" displays a clock instead of a blank screen after 1 minute of inactivity.
Settings_Sensitivity & LCD Off
Sensitivity
Caution)
∙ "Very High" is so sensitive that the black box can recognize bumps on the road or even
loud noises from inside the cabin as event recording triggers. If this occurs, try lowering
the sensitivity setting.
∙ "Off" instructs the black box not to initiate event recording even if actual impact has been
registered. Remember this before using the "Off" setting.
(In Parking mode, event recording will still take place even if Sensitivity is set to "Off”)
∙ Adjust the impact sensor sensitivity.
∙ Tap on the Sensitivity icon to cycle through Off, Low, Normal 1, Normal 2, Normal 3, High,
and Very High in that order.
∙ Impact registration above the specified sensitivity setting while the vehicle is on the move
or parked triggers event recording.
Parking Mode
∙ Configure Parking Mode and Switchover settings.
∙ Parking Mode can be set to Parking Infinite or Parking Event.
∙ Switchover can be set to Off, 5 mins, 15 mins, or 30 mins.
∙ While in Infinite mode, the black box automatically switches over to Parking mode if its G-sensor
does not detect vehicle motion for the duration specified under Switchover.
∙ While in Parking mode, the black box automatically reverts to Infinite mode when its G-sensor detects motion.
Settings_Parking Mode & Clock
∙ Configure the black box's system time and date.
∙ Select a field and use the / buttons on the right to change its value.
Tap on the exit icon on the right to exit. Changed settings are saved automatically.
∙ Configured system time settings appear on video recording file names and on the clock
displayed when the LCD is automatically turned off (if enabled)
Clock
Timer
Shutoff Voltage
∙ While in Parking mode, the black box turns off automatically after the amount of time set
under Timer has elapsed.
∙ Tap on the Timer icon to cycle through 6H, 12H, 24H, and 48H in that order.
∙ Shutoff Voltage protects your car's batteries from discharging completely when using
them as a source of constant power for the black box.
∙ While the black box is operating in Parking mode, Shutoff Voltage automatically turns off
the black box if the batteries' voltage drops below the specified level for longer than
5 minutes.
∙ Tap on the Shutoff Voltage icon to cycle through 11.5V, 11.7V, 11.9V, and 12.1V in
that order. Choose the shutoff voltage level based on the current battery voltage level.
∙ Current battery voltage level is displayed on the right side of the Shutoff Voltage screen.
Settings_Timer & Shutoff Voltage
Settings_Microphone & Calibration
Microphone
∙ Turn the built-in microphone on or off.
∙ Set to "Off" if you do not want to have conversations and sounds from inside the cabin
to be recorded along with the video.
Calibration
∙ Calibrate the black box's LCD screen.
∙ Calibrate the screen if your touch input is not being recognized correctly.
Tap on the calibration points accurately using your fingernail or a pen
(recommended).
Caution)
Incorrectly calibrating the screen may lead to you not being able to select the menu i
cons.
Settings_Reset & Format
Reset
∙ Restore the black box's factory default settings.
∙ Resetting erases all previous user-configured settings.
Format
∙ Format the micro SD card.
∙ If using a new micro SD card, make sure to format it first.
∙ Formatting a used micro SD card erases all files stored on the card.
Back up all important data on to a separate storage device before formatting the card.
∙ The black box may not turn on if the folders inside the micro SD card contain files
other than black box video files.
※ micro SD Card File System: FAT32/Disk Allocation: 32K
[Default Settings]
∙ Video: High
∙ Channel: Front/Rear
∙ Sensitivity: Normal 2
∙ LCD Off: 30 secs.
∙ Parking Mode: Parking Event
∙ Switchover: 5 mins
∙ Timer: 12H
∙ Shutoff Voltage: 11.9V
∙ Microphone: On
PC Viewer
1. PC Viewer Installation
∙ PC Viewer lets you watch video recordings from micro SD cards and configure the black box's settings.
∙ Video recordings can be played back using regular media players, but doing so will display the feed from the front camera only.
∙ You must play back the video recordings using PC Viewer if you want to see feeds from both cameras.
∙ Insert the micro SD card into the adapter(included) and then connect the adapter to your computer using an SD card reader (sold separately).
∙ Double-click on the PC Viewer installation file contained in the micro SD card to start the installation process.
∙ Once the installation is complete, a viewer icon will appear on the desktop. Double-click on this icon to launch PC Viewer.
① Menu Bar
② Playback Window
③ G-Sensor
④ Playback Window Settings
⑤ Default Playback Speed
⑥ Playback Speed
⑦ Default Brightness
⑧ Brightness
⑨ Mute
⑩ Volume
⑪ Speed Indication: Requires GPS module (sold separately).
⑫ GPS Map: Requires GPS module (sold separately).
⑬ Operating Mode
⑭ Mode-Specific Playlist
2. PC Viewer Overview
[Default Settings]
∙ Drive: Custom
∙ Switchover: Parking Mode Event
∙ Parking Mode Activation: 5 mins
∙ Impact Sensitivity (Infinite): Normal 2
∙ Recording Quality: High
∙ Channel: Front/Rear
∙ LCD Off: 30 secs
∙ Timer: 12H
∙ Audio: Record
∙ Speaker Volume: Level3
∙ Battery Discharge Protection: Passenger Vehicle (12V)
∙ Shutoff Voltage: 11.9V
∙ System Time & Date: Custom
∙ Save to: Custom
∙ Skip Frame Count: 5
Open file from micro SD card.
Screen Capture: Screen captures are
saved to the CAM_CAPTURE folder.
Save Clip: Save a specific portion of
the video being played back.
Print
Settings
Zoom In/Out
About PC Viewer
[Menu Bar]
Product Specifications
Miscellaneous
Operating Status
LED Operating Status
Status
(Blue)
Off Parking Event
On Infinite/Parking Infinite
Status
(Red)
Off Settings or playback mode
Flashing Recording
On Standing by in
Parking Event mode
Blue/Red Flashing in Sync System error or
firmware update in progress
Flashing Alternately Micro SD card formatting in progress
Category Specification
Model RoadView RV-330LB
LCD 3.0" WQVGA
Touch Panel 3.0” Resistive Touch, Glare
Camera
Front (Main Unit) 2.0M Pixel, 1/3.2" CMOS Sensor
Rear 1/4" CMOS IMAGE Sensor
Viewing Angle Approx. 120°(diagonal)
Resolution & Frame Rate
Front (1CH) Front Camera: 1280 x 720 (Max. 30 fps)
Front/Rear (2CH) Front Camera: 1280 x 720 (Max. 25 fps)
Rear Camera: 640 x 480 (Max. 10 fps)
Encoding H.264 (video), PCM (audio)
File Format .AVI
Power 12V DC
Dimensions & Weight 95 x 85 x 34.5mm, 110g
Operating Temperature -20ºC to +60ºC
Storage Temperature -30ºC to +70ºC
Miscellaneous
Recording Resolutions
Recording Resolutions
Memory Ca
pacity Channel Category
Infinite
Event
Parking Infinite
Parking Event
16GB
1CH
Front
Allocation 40% 20% 40%
Available Space Approx. 6GB Approx. 3GB Approx. 6GB
Recording Capacity Approx. 110
minutes
Approx. 160
recordings
Approx. 220
minutes
Approx. 310
recordings
2CH
Front+Rear
Allocation 40% 20% 40%
Available Space Approx. 6GB Approx. 3GB Approx. 6GB
Recording Capacity Approx. 120
minutes
Approx. 170
recordings
Approx. 240
minutes
Approx. 330
recordings
Mode Condition Recording Status Destination Folder Front Camera Rear Camera
Infinite Mode
Infinite Infinite INFINITE HD
(1280x720)
VGA
(640x480)
G-Sensor Event EVENT
Parking Mode
Infinite Parking Infinite PARKING VGA(640x480)
G-Sensor Parking Event EVENT
HD
(1280x720)
Motion Detection Parking Event PARKING
Manual Mode Power/Manual Recording
button is pressed. Event EVENT
Product Warranty
Product Warranty
Product Model RV-330LB
Serial No. Purchase Da
te
Purchaser Telephone
Address
Retailer Telephone
This product's warranty period comes into effect on the date of
purchase. Please have your retailer record the date of purchase
to ensure full warranty coverage.
Servicing and Tech Support
1. Covered Servicing
- 1 year from date of purchase
(3 months for the micro SD card and 6 months for accessories)
2. Paid Servicing
- Upon expiration of normal warranty coverage
- Malfunctions resulting from user negligence
- Malfunctions caused by a force majeure event
- Malfunctions caused by issues with the power supply or perip
herals
- Defects caused by other extraneous factors
- Purchase of accessories and parts
- Defects caused by unauthorized disassembly of the product
1. Product (Model): In-Vehicle Black Box (RV-330LB)
2. Retailer:
3. Manufacturer/Country of Origin:
SD System Co., Ltd./Republic of Korea
4. Certification No.:
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Brigade EDR-101-008 (4505) User manual
-
Urive MD-7200E User manual
-
Urive Albatross II MD-7500P User manual
-
Iroad IONE-3300CH Owner's manual
-
-
-
Blacksys CL-100B User manual
-
-
Urive Albatross User manual
-
Janus Pro HD User manual
