2. Victor CutSkill
  3. 0384-2101

Victor CutSkill 0384-2101 Owner's manual

  • I have reviewed the product detail for the VICTOR Journeyman EDGE 2.0 Outfits. This document describes the features of the outfits, including cutting and welding capabilities, heating capacity, and the various components included. I'm ready to answer any questions you have about these devices.
  • What is included in the Journeyman EDGE 2.0 Outfit?
    What is the maximum cutting capacity of this outfit?
    What is the maximum welding capacity of this outfit?
    What is the heating capacity of this outfit?
ESAB / esab.com
XA00192521/NA/EN/08-30-17 Note: Specifi cations subject to change without notice. Products may vary from those pictured.
Ordering Information
Description Part Number
Journeyman EDGE 2.0 540/300, 90° Plus Outfi t 0384-2100
Journeyman EDGE 2.0 540/510, 90° Plus Outfi t 0384-2101
Cuts up to 8 in. (203.2 mm), welds up to 3 in. (76.2 mm)
with accessories
Up to 1,118,000 BTUs/hour heating
ESS42 Series regulators
WH 315FC+ torch handle with built-in fl ash arrestors
and check valves
CA 2460+ cutting attachment
The robust Journeyman EDGE 2.0 Outfi t comes with
everything you need to get started: CA 2460+ cutting
attachment, WH 315FC+ welding handle, cutting tip,
tip cleaner, heating nozzle, striker, goggles, hose,
welding nozzles and two EDGE 2.0 regulators.
Visit esab.com for more information.
Journeyman EDGE 2.0
Cutting, Heating and Welding
Journeyman Outfi t
/