Icop MINIPCI-L-8100 Owner's manual

Brand: Icop

Model: MINIPCI-L-8100

Type: Owner's manual

MiniPCI-L-8100

MiniPCI LAN Module

User’s Manual

(Revision 1.0A)

The information in this manual is subject to change without notice for continuous improvement in

the product. All rights are reserved. The manufacturer assumes no responsibility for any

inaccuracies that may be contained in this document. And makes no commitment to update or to

keep current the information contained in this manual.

No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,

in any form or by any means without the prior written permission of the ICOP Technology Inc..

Manual No. IUMMiniPCI-L-8100000-01 Ver.1.0A January, 2008

Trademarks Acknowledgment

Vortex86SX™ is the registered trademark of ICOP Technology Inc.

Other brand names or product names appearing in this document are the properties

and registered trademarks of their respective owners. All names mentioned herewith

are served for identification purpose only.

T a b l e o f C o n t e n t s

T a b l e o f C o n t e n t s.............................................................iii

C h a p t e r 1 Introduction……………………………………………1

1.1 Packing List............................................................1

1.2 Specifications.........................................................2

1.3 Board Dimension....................................................3

C h a p t e r 2 Installation……………………………………………..4

2.1 Board Outline.........................................................4

2.2 Connectors & Jumpers Summary...........................5

2.3 Pin Assignments & Jumper Settings.......................6

C h a p t e r 3 Driver Installation……………………………………7

Warranty..............................................................................................8

MiniPCI-L-8100 MiniPCI LAN Module

C h a p t e r 1

Introduction

1.1 Packing List

Product Name Package

MiniPCI-L-8100

Mini-PCI LAN module x1

CABLE-MINIPCI-L-30CM x 1

MiniPCI-L-8100 MiniPCI LAN Module 2

1.2 Specifications

Features MiniPCI-L-8100

Chipset

Realtek 8100B 10/100 Mbps Ethernet Controller

Integrated Fast Ethernet MAC, Physical chip and

transceiver in one chip

Supports 10 Mbps and 100 Mbps N-way Auto-negotiation

operation

Supports Full Duplex Flow Control (IEEE 802.3x)

Half/Full duplex capability

Compliant to PC99/PC2001

Bus Interface Mini-PCI standard compliant

Connectors 1.25mm 8-pin wafer for LAN x1

Power Requirement Single Voltage +5V @40mA

Dimension 64.7mm X 44.6mm (2.54 x1.76 inches)

Weight 9g

Operating

Temperature -20oC ~ +70oC

-40°C ~ +85°C (Optional)

MiniPCI-L-8100 MiniPCI LAN Module 3

1.3 Board Dimension

MiniPCI-L-8100 MiniPCI LAN Module 4

C h a p t e r 2

Installation

2.1 Board Outline

MiniPCI-L-8100 MiniPCI LAN Module 5

2.2 Connectors & Jumpers Summary

Summary Table

Nbr Description Type of Connections Pin

nbrs.

J1 MINI-PCI TYPE-III MINI-PCI TYPE-III interface 124-pin

J2 LAN Wafer, 1.25∅ , 8x1 8-pin

LED 1 LAN Link LED ( Yellow ) LED-SMD

LED 2 LAN Active LCD (Green) LED-SMD

MiniPCI-L-8100 MiniPCI LAN Module 6

2.3 Pin Assignments & Jumper Settings

J4: LAN

Pin # Signal Name

1 LANTX+ 2 LANTX-

3 LANRX+ 4 NC

5 NC 6 LANRX-

7 NC 8 NC

MiniPCI-L-8100 MiniPCI LAN Module 7

C h a p t e r 3

Driver Installation

The Realtek RTL-8100B 10/100Mbps Ethernet controller board supports both 10/100BASE-T

and allows direct connection to your 10/100Mbps Ethernet based Local Area Network for full

interaction with local servers, wide area networks such as the Internet.

I/O and IRQ settings can be done by software with the supplied utility software, or it can be set

for Plug and Play compatibility. The controller supports: Half / Full-Duplex Ethernet function to

double channel bandwidth, auto media detection.

Regarding the RTL-8100B driver, please download it from:

http://www.dmp.com.tw/tech/icop_cd/HTML/drv_rtl8100.htm

http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=6&PFid=6&Level=5

&Conn=4&DownTypeID=3&GetDown=false

MiniPCI-L-8100 MiniPCI LAN Module 8

Warranty

This product is warranted to be in good working order for a period of one year from the date of purchase.

Should this product fail to be in good working order at any time during this period, we will, at our option,

replace or repair it at no additional charge except as set forth in the following terms. This warranty does not

apply to products damaged by misuse, modifications, accident or disaster. Vendor assumes no liability for

any damages, lost profits, lost savings or any other incidental or consequential damage resulting from the

use, misuse of, originality to use this product. Vendor will not be liable for any claim made by any other

related party. Return authorization must be obtained from the vendor before returned merchandise will be

accepted. Authorization can be obtained by calling or faxing the vendor and requesting a Return

Merchandise Authorization (RMA) number. Returned goods should always be accompanied by a clear

problem description.

Icop MINIPCI-L-8100 Owner's manual

Icop MINIPCI-L-8100 Owner's manual

Icop MINIPCI-L-8100 Owner's manual

Related papers

Other documents