Niigata seiki 125T User manual

Niigata seiki
Brand
Niigata seiki
Model
125T
Type
User manual

This manual is also suitable for

WARNING
Make sure all mounting screws are tight before use.
Use only for intended application. Improper use may
cause accident or injury.
Post
Part Diagram Name Qty
1
Beam 1
Coupler 1
Clamp Screw 1
Clamp Face
Washer
1
Nut
1
1
Hex Wrench Size:
SBV-100T 125T 150T 2mm
SBV-200T 2.5mm
ASSEMBLED DRAWING
CAST IRON BLOCK WITH V GROOVE
Model No. SBV
-
100T125T150T200T
<
combined
>
Thank you for purchasing the Cast Iron Block With V Groove.
Please attach components to the block body as shown in the
diagram below.
PART IDENTIFICATION
INSTRUCTION MANUAL
Do not use if parts are missing.
Contact place of purchase for
replacements.
I262
-
K1 1805
SPECIFICATIONS
100mm 125mm
100100100mm 125125125mm
0.05mm 0.06mm
SBV-125T
Cast Iron
150mm
150150150mm
0.06mm
SBV-150T
200mm
200200200mm
0.07mm
SBV-200T
SBV-100TModel No.
Material
Size(nominal)
Dimensions
V-Groove to Base Parallelism,
Squareness,Surface Parallelism
Accuracy spec. does not apply to the open faces.
Warning:
Beam
Post
Washer
Nut
Coupler
Clamp
Screw
Clamp
Screw
V-Block
Clamp Face
Clamp
Face
Set Screw
Sectional
View
Niigata seiki Co., Ltd.
6-15-22, Tsukanome, Sanjo, Niigata, Japan, 955-0055
Tel. : +81-256-31-5670 Fax. : +81-256-39-7730
MAIL:[email protected]
URL http://www.niigataseiki.co.jp
  • Page 1 1

Niigata seiki 125T User manual

Niigata seiki
Brand
Niigata seiki
Model
125T
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents