Dakota Digital RTX-51C Mounting Manual

Manual # 650748

RTX-51C

Dakota Digital RTX Instrument Installation

For 1951-52 Chevrolet Car

Your new RTX-51C kit includes:

Installation

Control Box

36” Main Harness

Universal

Sender Pack

Installation Manuals

RTX Displays

1. Remove the stock gauges from the dash by removing the six (6) nuts from the backside of the dash

and retain the hardware for reassembly.

Buzzer

Switch Assembly

Interconnect Harness

Manual # 650748

WARNING: This product can expose you to chemicals including lead, which is known to the State of

California to cause cancer and birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov

3. Connect both gauges using the provided interconnect harness. Also connect the buzzer (optional for

audio feedback) to the back of the system. Connect the main harness to the interconnect harness

and carefully route the other end back to the control box.

2. The RTX system is a direct replacement

of the original cluster, so use the three

mounting studs for each gauge along

with the factory hardware to secure the

RTX system to the dash.

4. Refer to the main manual for wiring instructions to complete the RTX installation.

Interconnect Harness

Buzzer

Interconnect Harness

36” Main Harness