Canon EOS D30 Owner's manual

To Download Images to a Computer

for

Windows

for

Macintosh

Install the Software p. 6 p. 62

Connect the Camera to a Computer p. 8 p. 64

Start the Software and Download Images p. 18 p. 68

Start ZoomBrowser EX (Windows) or ImageBrowser (Macintosh computers)

and load images onto the computer.

• This guide explains the installation method and features of the software for loading

and processing images on a computer that have been shot with a Canon digital camera.

• There are precautions that you should take before installing the USB driver software.

Ensure that you read this guide before installing it.

• Read the agreement in this guide before using the software on the supplied CD-ROM.

By using the software, you agree to be bound by the terms of the agreement.

Software Starter Guide

WindowsMacintosh

E

English Edition

INSTRUCTIONS

READ CAREFULLY BEFORE USING!

CANON SOFTWARE LICENSE AGREEMENT

IMPORTANT - READ THIS AGREEMENT BEFORE USING THE SOFTWARE ON THE CD-ROM IN

THIS BOX. BY USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS OF THIS

AGREEMENT.

This is a license agreement (the “Agreement”) between you and Canon Inc. (“Canon”).

IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT

USE THE SOFTWARE PROGRAM ON THE CD-ROM AND THE USER MANUAL IN THIS BOX

(COLLECTIVELY, THE “SOFTWARE”) AND RETURN THE SOFTWARE WITHIN 30 DAYS FROM

THE DATE OF PURCHASE TO YOUR POINT OF PURCHASE FOR A REFUND.

In consideration of the right to use the SOFTWARE, you agree to abide by the terms and

conditions of this Agreement.

1. LICENSE: Canon grants you the non-exclusive right to use the SOFTWARE only on a

single computer. You may physically transfer the SOFTWARE from one computer to

another provided that the SOFTWARE is used on only one computer at a time. You

shall not install or use the SOFTWARE on a network, multiple CPU, multiple site

arrangement, or any other hardware configuration where the SOFTWARE is accessible

to more than one CPU or to more than one user.

YOU SHALL NOT ASSIGN, SUBLICENSE, RENT, LEASE, LOAN, CONVEY OR OTHERWISE USE,

TRANSFER, COPY, TRANSLATE, CONVERT TO ANOTHER PROGRAMMING LANGUAGE,

ALTER, MODIFY, DECOMPILE OR DISASSEMBLE THE SOFTWARE, IN WHOLE OR IN PART,

EXCEPT AS EXPRESSLY PROVIDED IN THIS AGREEMENT.

2. BACK-UP COPY: You may make one copy of the SOFTWARE solely for back-up

purposes, or copy the SOFTWARE onto the permanent storage device (e.g. a hard disk)

of your computer and retain the original for back-up purposes. Any other copying of

the SOFTWARE is a violation of this Agreement. You must reproduce and include the

copyright notice on the back-up copy.

3. SUPPORT AND UPDATES: Canon is not responsible for providing maintenance or

support for use of the SOFTWARE. No updates, fixes or support will be made available

for the SOFTWARE.

4. LIMITED WARRANTY AND LIMITATION OF LIABILITY: It is your responsibility to choose,

maintain and match the hardware and software components of your computer system.

Thus Canon does not guarantee uninterrupted service or correction of errors or that

the functions or performance of the SOFTWARE will meet your requirements. THE

SOFTWARE IS LICENSED ON AN “AS IS” BASIS AND WITHOUT WARRANTY OF ANY

KIND. The CD-ROM storing the SOFTWARE is warranted only against defective material

under normal use for a period of ninety (90) days after purchase from an authorized

Canon dealer as evidenced by your sales receipt. Your sole remedy for a defective CD-

ROM shall be replacement of the same without charge when returned by you at your

expense to your point of purchase and proven to be defective upon inspection. The

Replacement CD-ROM will be warranted for the remainder of the original ninety (90)

day warranty period of the defective CD-ROM. The limited warranty does not apply if

the failure of the CD-ROM resulted from accident, abuse or misapplication of the

SOFTWARE and shall not extend to anyone other than the original user of the

SOFTWARE.

EXCEPT AS SPECIFICALLY SET FORTH IN THIS PARAGRAPH 4, CANON, CANON’S

SUBSIDIARIES, DISTRIBUTORS AND DEALERS DISCLAIM ALL WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE.

i

NEITHER CANON NOR ANY OF CANON’S SUBSIDIARIES, DISTRIBUTORS OR DEALERS IS

LIABLE FOR ANY DAMAGES HOWSOEVER CAUSED, INCLUDING WITHOUT LIMITATION,

DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE INCLUDING LOSS OF

PROFITS, EXPENSE OR INCONVENIENCE HOWSOEVER CAUSED OR ARISING OUT OF THE

SOFTWARE OR THE USE THEREOF.

NEITHER CANON, NOR ANY OF CANON’S SUBSIDIARIES, DISTRIBUTORS OR DEALERS

SHALL HAVE ANY OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT

BROUGHT BY A THIRD PARTY ALLEGING THAT THE SOFTWARE OR THE USE THEREOF

INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY.

5. TERM: This Agreement is effective upon your using the SOFTWARE and remains in

effect until expiration of all copyright interests in the SOFTWARE unless earlier

terminated. You may terminate this Agreement by destroying the SOFTWARE. This

Agreement will also terminate without notice to you if you fail to comply with any of

the terms of this Agreement and you must then promptly return the SOFTWARE. In

addition, Canon may enforce its other legal rights.

6. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE: The SOFTWARE is provided with

restricted rights. Use, duplication or disclosure is subject to restrictions as set forth in

either subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer software

clause at DFARs 252.227-7013 or subparagraph (c) (1) and (2) of the Commercial

Computer Software Restricted Rights Clause at FAR 52.227-19, as applicable.

7. SEVERABILITY: In the event that any provision of this Agreement is declared or found

to be illegal by any court or tribunal of competent jurisdiction, such provision shall be

null and void with respect to the jurisdiction of that court or tribunal and all the

remaining provisions of this Agreement shall remain in full force and effect.

8. CONTROLLING LAW: The terms of this Agreement as it relates to purchases of the

Software in the United States of America shall be governed and construed in all

respects in accordance with the laws and regulations of the State of New York, without

reference to choice of law principles. The terms of this Agreement as it relates to

purchases of the Software in Canada shall be governed by the laws of the province of

Ontario.

9. OWNERSHIP: All rights, including but not limited to copyrights and trade secret rights,

to the SOFTWARE belong to Canon, its affiliated corporations and third party licensors.

Your use of the SOFTWARE is subject to the United States, Canada and other applicable

copyright and trademark laws and nothing in this Agreement constitutes a waiver of

the rights of Canon, its affiliated corporations and third party licensors under such laws.

Nothing contained in Paragraph 1 shall be construed to give Canon any ownership

rights in any images, graphics or textual material that you save in connection with the

Software.

10. ACKNOWLEDGEMENT: BY USING THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU

HAVE READ THIS AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS

TERMS AND CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THE

COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON

CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS OR

PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS

BETWEEN THE PARTIES RELATING TO THE SUBJECT MATTER HEREOF. NO AMENDMENT

TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORIZED

OFFICER OF CANON.

ii

Introduction

Thank you for purchasing a Canon digital camera. This guide explains the software used

with the EOS D30.

Note

• This software can also be used with most other Canon digital cameras including

the PowerShot series.

Please refer to the chart on Page 4 for Windows or Page 60 for Macintosh

computers for further information.

Safety Precautions

Please read the safety precautions carefully before using this product. Ensure that you use

the product correctly according to the procedures described in this guide.

The following safety precautions are intended to instruct you in the safe and correct

operation of the product and its accessories to prevent injuries or damage to yourself,

other persons and property. Please read and ensure that you understand them before you

proceed to the other sections of this guide.

Warnings This mark indicates topics that could lead to death or serious injury if

ignored or handled incorrectly.

Warning

• Do not play the supplied CD-ROM(s) in any CD-ROM Player that does not support

data CD-ROMs. The extremely loud sound that may result from playing the CD-

ROM(s) in an audio CD player (music player) could damage the speakers. It is also

possible to suffer hearing losses from listening with headphones to the loud

sounds of a data CD-ROM played on a music CD player.

1

Windows

Using the Software

on the Windows Platform

Introducing the Software .......................................................... 2

Camera and Software Compatibility ................................... 4

System Requirements ............................................................... 5

Installing/Uninstalling the Software ........................................ 6

Connecting the Camera to a Computer .................................... 8

Selecting a Connection Method .......................................... 8

Connecting to a USB Port .................................................... 9

Installing the USB Driver ...................................................... 11

Connecting via a CF Card Reader or PC Card Slot ............... 17

Using ZoomBrowser EX the First Time

(From Loading to Printing) ..................................................... 18

Using Additional ZoomBrowser EX Functions .......................... 24

Displaying Images ................................................................ 24

Organizing Images ............................................................... 28

Erasing Images ..................................................................... 29

Saving Computer Images to a CF Card in the Camera ......... 30

Merging Panoramic Images with PhotoStitch ..................... 30

Sending Images via E-mail ................................................... 31

Editing and Applying Special Effects to Images .................. 31

Editing the Print Order Settings (DPOF) .............................. 32

Printing Images .................................................................... 33

Shooting with the RemoteCapture Function ...................... 36

Converting RAW Images ...................................................... 39

Backing Up Data .................................................................. 41

Loading Images with TWAIN-Compliant Application Programs

(Adobe Photoshop, etc.) ......................................................... 42

Setting the Parameters ........................................................ 45

Converting Raw Images ....................................................... 46

Troubleshooting the USB Driver Installation ............................ 49

Troubleshooting the Computer Connection ............................. 95

Customer Support ..................................................................... 96

2

Introducing the Software

This section introduces the powerful software programs for the Windows platform

contained on the CD-ROMs (2) included with the camera.

Canon Digital Camera Solution Disk

ZoomBrowser EX

To load camera images, start ZoomBrowser EX.

Camera Connection Functions

(Also effective for CF card readers or PC card readers)

• Displays camera images.

• Downloads camera images to the computer.

• Loads and saves RAW images in the RAW format.

• Converts and saves RAW images in other formats.

• Saves computer images to a CF card in the camera.

• Connecting to a USB port automatically starts ZoomBrowser EX and displays the

camera images.

• Sets the camera parameters.

Image File Management Functions

• Displays, moves, copies or deletes images stored on computer disks.

• Allows simple editing procedures, such as image color adjustments and cropping.

• Displays all the files in a specified folder at once and zooms them in and out to

facilitate visual searches.

• Displays files in chronological order in a window that looks like a time tunnel.

• Replays images from the computer one-by-one at full screen size to simulate a

slide show.

Image Printing Functions

• Prints multiple images on the same page using the PhotoRecord printing utility.

• Performs auto layouts.

• Allows you to effortlessly place frames or backgrounds around your images for

artistic effect.

• Allows you to place titles or captions anywhere on the page.

• Lets you create your own exclusive albums.

Supports PhotoStitch Panoramas

• Allows you to select camera images or images registered with ZoomBrowser EX and

start PhotoStitch from within ZoomBrowser EX to merge a series of images into a

panorama in a few simple steps.

3

Windows

Supports the Adobe Photoshop LE Photo Retouching Program

• This photo-retouching program can be used to edit and apply special effects to your

images if it is installed and started.

Starts Your E-mail Program

• Starts your e-mail program and prepares images as e-mail attachments.

• Allows you to adjust image size and compression settings so that large files can be

made smaller for transmission.

PhotoStitch

• Effortlessly merges images that are shot over several frames with a camera.

• Merges any number of images horizontally or vertically, or in a matrix format.

• Makes images with straight lines appear natural not crooked when merged. (Select

the wide display format.)

• A 360-degree scene shot in several frames can be merged into a 360-degree image

and saved in the QuickTime VR format, making it appear as if you were standing in

the middle of the image looking about in all directions.

RemoteCapture

• Connecting via a USB port allows you to release the EOS D30’s shutter button from

the computer. The images are loaded directly into the computer.

• Connecting via a USB port also allows you to load images directly into the computer

by clicking the camera’s shutter button.

• Allows interval shooting with custom interval and frame settings.

TWAIN Drivers

Canon Digital Camera USB TWAIN Driver

Canon Digital Camera RS-232C TWAIN Driver

These are the driver utility programs that work within TWAIN-compliant application

programs, such as Adobe Photoshop, to load camera images directly into the

application program. The USB TWAIN Driver is for connecting via a USB port. The RS-

232C TWAIN Driver is for connecting via a serial (COM) port. Install the RS-232C

TWAIN Driver if you are going to load images via a CF card reader or PC card reader

in Windows 95/Windows NT 4.0. Start either TWAIN driver from a TWAIN-compliant

application program. Neither TWAIN driver can be used as a stand-alone program.

Adobe Photoshop LE CD-ROM

Adobe Photoshop LE

• Allows you to edit images, apply special effects, print and create sophisticated

graphics for the web.

4

Camera and Software Compatibility

The Canon Digital Camera Solution Disk contains a number of software programs and

drivers. Check the chart below for the compatibility of your particular camera model with

each program’s special functions.

*

1

Only compatible with computers with built-in USB ports running pre-installed versions of Windows 98 or Windows 2000.

*

2

Only compatible with the USB interface.

●

-

●

-

●

-

●

-

●

-

●

-

●

-

●

-

●

-

●

-

●

-

●

-

●

-

●

-

●

-

●

-

●

-

●

-

●

-

Computer

Interface

Downloading

From Camera

Downloading

From External

Card Reader

RAW Image

Conversion

Uploading

to Camera

Shooting from

the Computer

Editing Camera

Print Settings

(DPOF)

Editing Camera

Slide Show

Merging Images

Shot in Stitch

Assist Mode

ZoomBrowser EX

TWAIN Driver

ZoomBrowser EX

TWAIN Driver

ZoomBrowser EX

RemoteCapture*

2

ZoomBrowser EX

PhotoStitch

PowerShot Series

SoftwareFunction

Model

USB*

1

Serial

EOS D30

DIGITAL

IXUS

S100 S10/S20 A50

Pro70

A5 Zoom

A5

350 600

5

Windows

System Requirements

The following system requirements must be met to install and operate the software.

=

Computer Model

IBM PC/AT compatible

=

OS

Windows 95, Windows 98 (Including the Second Edition),

Windows NT 4.0 (Service Pack 3 or higher required) or

Windows 2000

=

CPU

Pentium 133 MHz or better

=

RAM

32 MB or more (Windows 95/98)

64 MB or more (Windows NT 4.0/Windows 2000)

=

Interface

USB: (Limited to pre-installed Windows 98 or

Windows 2000 systems)

=

Free Hard Disk Space

Canon Utilities

ZoomBrowser EX: 120 MB or more

(Including the PhotoRecord printing utility)

PhotoStitch: 40 MB or more

RemoteCapture: 20 MB or more

Canon Digital Camera USB TWAIN Driver: 15 MB or more

Canon Digital Camera RS-232C TWAIN Driver:

15 MB or more

Adobe Photoshop LE: 40 MB or more

=

Display

Minimum: 800 x 600 pixels, 256 colors (8 bit)

Recommended: 1,024 x 768 pixels, High Color (16 bit) or

more

• The cable connection is only supported for computers with Windows 98 or

Windows 2000 preinstalled.

• A CD-ROM drive is required to install the software.

• QuickTime 3 or higher is required to save PhotoStitch output in the QuickTime VR

format.

6

Installing/Uninstalling the Software

Installing from the Canon Digital Camera Solution Disk

If you are installing the software onto Windows NT 4.0 or Windows 2000, you must

first log on as the administrator and then install the software.

1. Close any programs that are running.

2. Place the Canon Digital Camera Solution Disk in the CD-ROM drive.

The installer panel will automatically display.

• If the installer panel does not automatically display, use the following procedures

to start it.

1. Double-click the [My Computer] icon on the desktop, and double-click the

CD-ROM icon in the next window.

2. Double-click the [Setup] icon.

3. Click [Software Installation].

4. Select the install location and click the [Next] button.

5. Select the software you wish to install and follow the on-screen

instructions to proceed.

6. Click the [Exit] button when the installation is complete and the installer

panel appears again.

7

Windows

Installing from the Adobe Photoshop LE CD-ROM

Place the Adobe Photoshop LE CD-ROM in the drive and double-click the [My Computer],

[Photosle], [English], and [Photosle] folders, followed by the [Setup.exe] file. Follow the

on-screen instructions to continue with the installation.

You must input the software serial number to install Adobe Photoshop LE.

It can be found on the CD-ROM case.

If You Will Be Connecting via a USB Port

You must install a separate USB driver. Please see page 11 or 14 for instructions.

Uninstalling the Software

To remove the installed software, click the Windows [Start] menu and select [Settings],

[Control Panel] and [Add/Remove Programs]. ZoomBrowser EX can also be uninstalled by

clicking the [Start] menu and selecting [Programs], [Canon Utilities], [ZoomBrowser EX],

and [ZoomBrowser EX Uninstall]. (PhotoRecord, PhotoStitch and RemoteCapture can be

removed with the same procedures.)

To remove Adobe Photoshop LE, click the Windows [Start] menu and select [Programs],

[Adobe], [Photoshop Limited Edition] and [Uninstall Photoshop Limited Edition].

8

Connecting the Camera to a Computer

Selecting a Connection Method

The following different interfaces and methods can be used to connect the camera to a

computer. Once a connection has been established using one of the methods, you can

start the software and begin to load images from the camera (➜ p. 18, 42).

Use the AC Adapter

• We suggest that you use the AC adapter while the camera is connected to a

computer to conserve battery power.

USB Port (➜ p. 9)

The USB interface can start the image loading software automatically.

CF Card Reader or PC Card Slot (➜ p. 17)

If you have a computer equipped with a PC card slot, a CF card reader or a PC card

reader, you can place the camera’s CF card into these devices to establish a direct

connection. You will require a PC card adapter for PC card slots.

CF Card

USB Cable Connector Shapes

Computer EndCamera End

Computer USB Port

The USB port is

marked with

this symbol.

PC Card Adapter

9

Windows

Connecting to a USB Port

Requirements for the USB Interface

• The USB interface can only be used to connect the camera to computers with

Windows 98 or Windows 2000 preinstalled. The USB ports on computers

running versions of Windows 98 or Windows 2000 upgraded from Windows 3.1

or Windows 95, or versions of Windows 2000 upgraded from Windows 98 may

not operate correctly.

• Connect the USB cable directly to one of the computer’s main USB ports. The

interface may not function correctly if the camera is connected via a USB hub.

• The interface may not function correctly while other USB devices, excluding USB

mice and keyboards, are connected. If this problem arises, detach the camera

and the other devices, and reconnect the camera only.

• Do not attach more than one camera to the USB ports of the same computer at

the same time. The cameras may not operate correctly.

Important

• Please do not place your computer into standby mode while the camera is

connected to its USB port. If you place the computer into standby mode while

the camera is connected to a USB port, do NOT disconnect the USB cable from

the camera or computer. Try to revive the computer. If the USB cable is detached

in standby mode, some computers may not return to active mode correctly. For

instructions regarding the standby mode, please consult the manual

accompanying your computer and operating software.

10

1. Attach the supplied USB cable to a USB port directly on the computer

and to the DIGITAL terminal on the camera as shown below.

• There is no need to turn the camera or computer power off when attaching or

detaching the USB cables.

• Please consult your computer’s manual for the location of the USB ports.

2. Install the USB driver the first time you connect via a USB port.

(➜ p. 11, 14)

Precaution for Unplugging Cables

from the DIGITAL Terminal

• Always press the PUSH button on the

connector to detach the cable from the camera’s

DIGITAL terminal.

USB Port

USB Connector

PUSH Button

DIGITAL Terminal

USB Connector

2. Insert the connector so that the

4

marks on

the connector and camera align.

1. Open the expansion

electronics cover.

11

Windows

Installing the USB Driver

(Preinstalled Windows 98/2000 Systems Only)

Notes Regarding Installation

• The USB driver only needs to be installed the first time the camera is connected via the

USB interface. Installation is not required from the second time onward.

• Do not cancel the installation partway through. Allow the procedure to finish completely

before exiting. The camera may not operate correctly if the installation is incomplete.

• Read the “Troubleshooting the USB Driver Installation” section on page 49 if the

installation cancels itself during the procedure, if the installation does not proceed as

described in these procedures, or if you think that the drivers are not properly installed.

• Read the “Uninstalling the USB Driver” section on page 49 or 52 for instructions for that

procedure.

Installing the USB Driver into Windows 98

Windows 98 CD-ROM

• Your computer may prompt you to insert the CD-ROM containing your Windows

system software during the installation. Have the Windows disk handy in case it is

required.

1. Once you have attached the USB cable to the camera and computer, set

the camera’s main switch to [On]. (➜ p. 10)

The “Add New Hardware Wizard” dialog will appear after a moment.

2. Read the dialog and click the [Next] button.

The dialog will change to the search selection dialog.

Your camera model name

will appear here.

12

3. Select [Search for the best driver for your device (recommended)] and

click the [Next] button.

The dialog will change to the one that allows you to specify the search location.

4. Place the Canon Digital Camera Solution Disk in the CD-ROM drive.

5. Place a check in the [Specify a location] option, click the [Browse]

button, and select the [\USB_drv\English] folder. Click the [Next] button.

The dialog will change to the one that states it is searching for the driver files.

6. Read the dialog and click the [Next] button.

Your camera model name

will appear here.

13

Windows

The computer will start to copy the driver files from the CD-ROM.

When all the required files have been copied, the dialog will state that the

installation is complete.

What to Do if You Are Prompted for the Windows System Disk

during the Driver File Copying Process

• If prompted for the Windows system disk, replace the Canon Digital Camera

Solution Disk with it and follow the on-screen instructions. If a dialog states that

the “usbscan.sys” cannot be found, click the [Browse] button and specify the

location as the [WIN98] folder on the Windows system disk.

7. Read the dialog and click the [Finish] button.

An event dialog for your camera model will display to allow you to select

application programs. (➜ p. 18, Step 3, or p. 42, Step 3.)

• If a dialog prompts you to restart your computer, remove the CD-ROM from the

drive and restart the computer as instructed.

Do NOT cancel the copy

operation while it is in progress.

Your camera model name

will appear here.

14

Installing the USB Driver into Windows 2000

Begin by logging onto the computer as an Administrator and then install the USB

driver.

1. Once you have attached the USB cable to the camera and computer, set

the camera’s main switch to [On]. (➜ p. 10)

The “Found New Hardware Wizard” dialog will appear after a moment.

2. Read the dialog and click the [Next] button.

3. Select [Search for a suitable driver for my device (recommended)] and

click the [Next] button.

The dialog will change to the one that allows you to specify the search location.

4. Place the Canon Digital Camera Solution Disk in the CD-ROM drive.

Your camera model

name will appear

here.

15

Windows

5. Place a check in the [Specify a location] option, click the [Next] button.

The dialog will change to the one that states it is searching for the driver files.

6. Click the [Browse] button, select the [\USB_drv\English] folder from the

Solution Disk and click [OK].

7. Read the dialog and click the [Next] button.

Your camera model

name will appear

here.

Your camera model

name will appear

here.

16

8. Click the [Yes] button if the “Digital Signature Not Found” message

displays.

9. Click [No to All] if the “Confirm File Replace” dialog displays.

10. Read the message and click the [Finish] button.

An event dialog for your camera model will display to allow you to select application

programs. (➜ p. 18, Step 3 or p. 42, Step 3.)

• If a dialog prompts you to restart your computer, remove the CD-ROM from the

drive and restart the computer as instructed.

Your camera model

name will appear

here.

Your camera model

name will appear

here.

Page is loading ...

Canon EOS D30 Owner's manual

Canon EOS D30 Owner's manual

Related papers

Other documents