Heated Drawer
Heated Drawer
Model
Standard Features
•
Digital Temperature Controls
• Available in standard width, built-in or
freestanding models
• Each drawer has a recessed individual
thermostatic control, temperature monitor,
vent slides and on/off switch
• Heavy-duty drawer slides with nylon rollers and
adjustable sliding vents on each drawer
• Standard 20¾” x 12¾” x 6” (527 x 324 x 152 mm) pan
supplied with each drawer.
• Completely insulated individual cavities
provide maximum energy efficiency
Options
• Oversized drawer and pan
20” x 15 x 5” (508 x 381 x 127 mm) available
•
Heavy-duty casters available for portability
FREESTANDING STANDARD
HD-1
BUILT-IN STANDARD
HD-1B
HD-2 HD-2B
HD-3 HD-3B
FREESTANDING STANDARD
HD-1
BUILT-IN STANDARD
HD-1B
HD-2 HD-2B
HD-3 HD-3B
Hold everything from meat and potatoes
to vegetables and rolls in the Merco
Heated Drawer. Each drawer features
adjustable sliding vents and individual
thermostatic controls to hold a wide
variety of hot foods safely for peak
serving periods.
Flexibility:
Available in 1-, 2-, and 3-drawer
freestanding models built of rugged
stainless steel with durable nylon rollers,
stainless steel slides, and heavy-duty
hardware. Each drawer has a recessed
on/off switch, thermostat, temperature
monitor, and vent slides to control
humidity. Standard 20¾” x 12¾” x 6”
(527 x 324 x 152 mm) pans lift straight out of
standard width units are supplied with
each drawer. A larger food pan 20” x 15”
x 5” (508 x 381 x 127 mm) with drawer frame is
optional. Also available as 1-, 2-, and
3-drawer built-in units.
The insulated top and sides of the Merco
Drawer Warmer provide maximum energy
efficiency.
Freestanding units come with 6’ (1829
mm) cord and plug. A 4’ (1219 mm)
flexible conduit is standard with built-in
units.
An optional water/spillage pan and
splash baffle are available to create a
humidified environment.
Voltage:
120 volts, single phase. Freestanding,
models use NEMA 5-15P. 208 and 240
volts available, free standing models use
NEMA 6-15P. Export voltages available.
Merco Guarantee:
Merco equipment is guaranteed to be
free from quality problems in materials
and workmanship for a period of one
(1) year from the date of purchase, or
eighteen (18) months from the date of
shipment from factory, whichever comes
first. The heating elements are warranted
for two (2) years. Parts carry a two (2)
year warranty from date of purchase.
Description
Models
1111 N. Hadley Rd.
P.O. Box 1229
Ft. Wayne, IN 46801-1229
Tel: 888-417-5462
Fax: 800.285.9511
www.mercoproducts.com
The Heated Drawer shall be Merco
model ______ rated at _____ watts,
freestanding or built in, with _____ drawers
120 volts, single phase AC.
Bid Specifications:
Designs and specifications subject to change without notice.
1111 N. Hadley Rd.
P.O. Box 1229
Ft. Wayne, IN 46801-1229
Tel: 888-417-5462
Fax: 800.285.9511
www.mercoproducts.com
©2010 Merco, LLC / Printed in the U.S.A. / 1576-1/10
Heated Drawer
FREESTANDING STANDARD
HD-1
BUILT-IN STANDARD
HD-1B
HD-2 HD-2B
HD-3 HD-3B
Models
Freestanding - Standard
Model † Watts Amps*
No. of
Drawers
Shipping
Weight
HD-1 450 3.8 One 97 lbs. (44 kg)
HD-2 900 7.5 Two 168 lbs. (76 kg)
HD-3 1350 11.3 Three 232 lbs. (105 kg)
Built-in - Standard
Model † Watts Amps*
No. of
Drawers
Shipping
Weight
HD-1B 450 3.8 One 88 lbs. (40 kg)
HD-2B 900 7.5 Two 159 lbs. (72 kg)
HD-3B 1350 11.3 Three 223 lbs. (101 kg)
*Based on 120 volts.
† Freestanding units are standard with 4” (102mm) legs. Accessory
6” (152mm) stainless legs, or 2” (51mm), 3” (76mm), 4” (102mm) or 5”
(127mm) diameter casters available.
Dimensions:
Freestanding models - ( Without legs or casters)
HD-1: 29¹⁄₂” W x 22⁵⁄₈” D x 11” H (749 x 575 x 279 mm)
HD-2: 29¹⁄₂” W x 22⁵⁄₈” D x 21¹⁄₈” H (749 x 575 x 537 mm)
HD-3: 29¹⁄₂” W x 22⁵⁄₈” D x 31¹⁄₄” H (749 x 575 x 794 mm)
Built-in models - (Excluding front mounting flange)
HD-1B: 28¹⁄₈” W x 22³⁄₈” D x 9³⁄₄” H (714 x 568 x 248 mm)
HD-2B: 28¹⁄₈” W x 22³⁄₈” D x 20” H (714 x 568 x 508 mm)
HD-3B: 28¹⁄₈” W x 22³⁄₈” D x 30¹⁄₈” H (714 x 568 x 765 mm)
Cord Location:
Back of unit, lower left corner.
Available Accessories
6” (152 mm) Stainless Steel Adjustable Legs
2” (51 mm) Diameter Swivel Casters
- adds 2½” (64 mm) to Height
3” (76 mm) Diameter Locking Casters
- adds 4¼” (110 mm) to Height
4” (102 mm) Diameter Locking Casters
- adds 5¼” (133 mm) to Height
5” (127 mm) Diameter Locking Casters
- adds 6¼” (159 mm) to Height
Water/Spillage Pan (Splash Baffle
recommended)
Splash Baffle (w/Water/Spillage Pan creates
humidified environment.)
Freestanding Models
21.019
29.251
22.361
UNLESS OTHERWISE SPECIFIED
DIMS ARE IN INCHES
TOL ON ANGLE 2.0
2 PL 0.02 3 PL 0.016
HOLE SIZES: +.005/-.002
HATCO CORP., MILWAUKEE, WI
DESCRIPTION
HDWB 2 CONSTRUCTION
THIS PRINT IS NOT TO
BE REPRODUCED WITHOUT
PERMISSION OF HATCO CORP.
PART NUMBER
10.02.395.00
DRAWING NUMBER
10-02-396
REV
***
***
SCALE:0.120 PROJ: 893100 SHEET 1 OF 1
10-02-396
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
1 RELEASED ECO.# - BEW JRM
RV DESCRIPTION DATE ENG RB
RELEASE AND REVISION HISTORY CK:
ITEM RATED
VOLTS
RATED
WATTS
RATED
AMPS
CORD PLUG
STYLE
WIRING
DIAGRAM
AGENCY APPROVALS
UL CUL NSF CE
1 120 1800 15.0 NEMA 5-15P HS1-1996 X X
2 208 1800 8.7 NEMA 6-15P HS1-2000 X X
3 240 1800 7.5 NEMA 6-15P HS1-2000 X X
4 220E 1800 8.2 CEE 7/7 (SHUKO) HS1-2000 X
5 240E 1800 7.5 BS 1363 (BRITISH) HS1-2000 X
6 220-230E 1800-1968 8.2-8.6 CEE 7/7 (SHUKO) HS1-4518 X X
7 230-240E 1653-1800 7.2-7.5 BS 1363 (BRITISH) HS1-4518 X X
BOTTOM SUPPORT DIMENSION
S
DIMENSION
S [MM]
NOTES
6" STAINLESS STEEL LEGS 6.000 TO 7.500 152 TO 191 STANDARD
4" DIAMETER CASTERS 5.250 133
5" DIAMETER CASTERS 6.250 159
AVAILABLE OPTIONS (PER DRAWER):
1) DESIGNER DRAWER FRONT COLOR: WARM RED, WHITE GRANITE, BLACK, NAVY BLUE,
GRAY GRANITE, OR HUNTER GREEN IN LIEU OF STANDARD STAINLESS STEEL
2) DRAWER TYPE: OVERSIZED DRAWER FRAME IN LIEU OF STANDARD DRAWER
DRAWER TYPE: BISCUIT PAN DRAWER IN LIEU OF STANDARD DRAWER WITH PAN
3) PAN TYPE: OVERSIZED PAN IN LIEU OF STANDARD PAN
PAN TYPE: 6" DEEP ECONO PAN IN LIEU OF STANDARD PAN
4) CHIP GUARD
ADDITIONAL OPTIONS:
1) DISPLAY: INDICATING ELECTRONIC TEMPERATURE CONTROL IN LIEU OF STANDARD
THERMOSTATIC CONTROL WITH DRUM DISPLAY
ACCESSORIES:
1) WATER/SPILLAGE PAN
2) SPLASH BAFFLE
3) BOTTOM SUPPORT HARDWARE (SEE TABLE)
21.019
29.251
22.361
UNLESS OTHERWISE SPECIFIED
DIMS ARE IN INCHES
TOL ON ANGLE 2.0
2 PL 0.02 3 PL 0.016
HOLE SIZES: +.005/-.002
HATCO CORP., MILWAUKEE, WI
DESCRIPTION
HDWB 2 CONSTRUCTION
THIS PRINT IS NOT TO
BE REPRODUCED WITHOUT
PERMISSION OF HATCO CORP.
PART NUMBER
10.02.395.00
DRAWING NUMBER
10-02-396
REV
***
***
SCALE:0.120 PROJ: 893100 SHEET 1 OF 1
10-02-396
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
1 RELEASED ECO.# - BEW JRM
RV DESCRIPTION DATE ENG RB
RELEASE AND REVISION HISTORY CK:
ITEM RATED
VOLTS
RATED
WATTS
RATED
AMPS
CORD PLUG
STYLE
WIRING
DIAGRAM
AGENCY APPROVALS
UL CUL NSF CE
1 120 1800 15.0 NEMA 5-15P HS1-1996 X X
2 208 1800 8.7 NEMA 6-15P HS1-2000 X X
3 240 1800 7.5 NEMA 6-15P HS1-2000 X X
4 220E 1800 8.2 CEE 7/7 (SHUKO) HS1-2000 X
5 240E 1800 7.5 BS 1363 (BRITISH) HS1-2000 X
6 220-230E 1800-1968 8.2-8.6 CEE 7/7 (SHUKO) HS1-4518 X X
7 230-240E 1653-1800 7.2-7.5 BS 1363 (BRITISH) HS1-4518 X X
BOTTOM SUPPORT DIMENSION
S
DIMENSION
S [MM]
NOTES
6" STAINLESS STEEL LEGS 6.000 TO 7.500 152 TO 191 STANDARD
4" DIAMETER CASTERS 5.250 133
5" DIAMETER CASTERS 6.250 159
AVAILABLE OPTIONS (PER DRAWER):
1) DESIGNER DRAWER FRONT COLOR: WARM RED, WHITE GRANITE, BLACK, NAVY BLUE,
GRAY GRANITE, OR HUNTER GREEN IN LIEU OF STANDARD STAINLESS STEEL
2) DRAWER TYPE: OVERSIZED DRAWER FRAME IN LIEU OF STANDARD DRAWER
DRAWER TYPE: BISCUIT PAN DRAWER IN LIEU OF STANDARD DRAWER WITH PAN
3) PAN TYPE: OVERSIZED PAN IN LIEU OF STANDARD PAN
PAN TYPE: 6" DEEP ECONO PAN IN LIEU OF STANDARD PAN
4) CHIP GUARD
ADDITIONAL OPTIONS:
1) DISPLAY: INDICATING ELECTRONIC TEMPERATURE CONTROL IN LIEU OF STANDARD
THERMOSTATIC CONTROL WITH DRUM DISPLAY
ACCESSORIES:
1) WATER/SPILLAGE PAN
2) SPLASH BAFFLE
3) BOTTOM SUPPORT HARDWARE (SEE TABLE)
UNLESS OTHERWISE SPECIFIED
DIMS ARE IN INCHES
TOL ON ANGLE 2.0
2 PL 0.02 3 PL 0.016
HOLE SIZES: +.005/-.002
HATCO CORP., MILWAUKEE, WI
DESCRIPTION
HDWB 3 CONSTRUCTION
THIS PRINT IS NOT TO
BE REPRODUCED WITHOUT
PERMISSION OF HATCO CORP.
PART NUMBER
10.02.395.00
DRAWING NUMBER
10-02-397
REV
***
***
SCALE:0.120 PROJ: 893100 SHEET 1 OF 1
10-02-397
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
1 RELEASED ECO.# - BEW JRM
RV DESCRIPTION DATE ENG RB
RELEASE AND REVISION HISTORY CK:
ITEM RATED
VOLTS
RATED
WATTS
RATED
AMPS
CORD PLUG
STYLE
WIRING
DIAGRAM
AGENCY APPROVALS
UL CUL NSF CE
1 120 1800 15.0 NEMA 5-15P HS1-1996 X X
2 208 1800 8.7 NEMA 6-15P HS1-2000 X X
3 240 1800 7.5 NEMA 6-15P HS1-2000 X X
4 220E 1800 8.2 CEE 7/7 (SHUKO) HS1-2000 X
5 240E 1800 7.5 BS 1363 (BRITISH) HS1-2000 X
6 220-230E 1800-1968 8.2-8.6 CEE 7/7 (SHUKO) HS1-4518 X X
7 230-240E 1653-1800 7.2-7.5 BS 1363 (BRITISH) HS1-4518 X X
BOTTOM SUPPORT DIMENSION
S
DIMENSION
S [MM]
NOTES
6" STAINLESS STEEL LEGS 6.000 TO 7.500 152 TO 191 STANDARD
4" DIAMETER CASTERS 5.250 133
5" DIAMETER CASTERS 6.250 159
AVAILABLE OPTIONS (PER DRAWER):
1) DESIGNER DRAWER FRONT COLOR: WARM RED, WHITE GRANITE, BLACK, NAVY BLUE,
GRAY GRANITE, OR HUNTER GREEN IN LIEU OF STANDARD STAINLESS STEEL
2) DRAWER TYPE: OVERSIZED DRAWER FRAME IN LIEU OF STANDARD DRAWER
DRAWER TYPE: BISCUIT PAN DRAWER IN LIEU OF STANDARD DRAWER WITH PAN
3) PAN TYPE: OVERSIZED PAN IN LIEU OF STANDARD PAN
PAN TYPE: 6" DEEP ECONO PAN IN LIEU OF STANDARD PAN
4) CHIP GUARD
ADDITIONAL OPTIONS:
1) DISPLAY: INDICATING ELECTRONIC TEMPERATURE CONTROL IN LIEU OF STANDARD
THERMOSTATIC CONTROL WITH DRUM DISPLAY
ACCESSORIES:
1) WATER/SPILLAGE PAN
2) SPLASH BAFFLE
3) BOTTOM SUPPORT HARDWARE (SEE TABLE)
UNLESS OTHERWISE SPECIFIED
DIMS ARE IN INCHES
TOL ON ANGLE 2.0
2 PL 0.02 3 PL 0.016
HOLE SIZES: +.005/-.002
HATCO CORP., MILWAUKEE, WI
DESCRIPTION
HDWB 1 CONSTRUCTION
THIS PRINT IS NOT TO
BE REPRODUCED WITHOUT
PERMISSION OF HATCO CORP.
PART NUMBER
10.02.395.00
DRAWING NUMBER
10-02-395
REV
1
Group Pre-Release
SCALE:0.120 PROJ: 893100 SHEET 1 OF 1
10-02-395
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
1 RELEASED ECO.# - BEW JRM
RV DESCRIPTION DATE ENG RB
RELEASE AND REVISION HISTORY CK:
ITEM RATED
VOLTS
RATED
WATTS
RATED
AMPS
CORD PLUG
STYLE
WIRING
DIAGRAM
AGENCY APPROVALS
UL CUL NSF CE
1 120 1800 15.0 NEMA 5-15P HS1-1996 X X
2 208 1800 8.7 NEMA 6-15P HS1-2000 X X
3 240 1800 7.5 NEMA 6-15P HS1-2000 X X
4 220E 1800 8.2 CEE 7/7 (SHUKO) HS1-2000 X
5 240E 1800 7.5 BS 1363 (BRITISH) HS1-2000 X
6 220-230E 1800-1968 8.2-8.6 CEE 7/7 (SHUKO) HS1-4518 X X
7 230-240E 1653-1800 7.2-7.5 BS 1363 (BRITISH) HS1-4518 X X
BOTTOM SUPPORT DIMENSION
S
DIMENSION
S [MM]
NOTES
6" STAINLESS STEEL LEGS 6.000 TO 7.500 152 TO 191 STANDARD
4" DIAMETER CASTERS 5.250 133
5" DIAMETER CASTERS 6.250 159
AVAILABLE OPTIONS (PER DRAWER):
1) DESIGNER DRAWER FRONT COLOR: WARM RED, WHITE GRANITE, BLACK, NAVY BLUE,
GRAY GRANITE, OR HUNTER GREEN IN LIEU OF STANDARD STAINLESS STEEL
2) DRAWER TYPE: OVERSIZED DRAWER FRAME IN LIEU OF STANDARD DRAWER
DRAWER TYPE: BISCUIT PAN DRAWER IN LIEU OF STANDARD DRAWER WITH PAN
3) PAN TYPE: OVERSIZED PAN IN LIEU OF STANDARD PAN
PAN TYPE: 6" DEEP ECONO PAN IN LIEU OF STANDARD PAN
4) CHIP GUARD
ADDITIONAL OPTIONS:
1) DISPLAY: INDICATING ELECTRONIC TEMPERATURE CONTROL IN LIEU OF STANDARD
THERMOSTATIC CONTROL WITH DRUM DISPLAY
ACCESSORIES:
1) WATER/SPILLAGE PAN
2) SPLASH BAFFLE
3) BOTTOM SUPPORT HARDWARE (SEE TABLE)
Built-in Models
-
1
-
2
Merco / Savory HD-1 Datasheet
- Type
- Datasheet
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Merco / Savory MHC-22-GEN Datasheet
-
-
-
-
Merco / Savory HMC-M2 Datasheet
-
-
-
Merco / Savory HD-2B Operating instructions
-
-
Other documents
-
Merco Products Heated Drawer Operating instructions
-
HP 240A Quick start guide
-
Hatco HDW-4 Installation & Operating Manual
-
-
Merco Savory EZFF-240 User manual
-
Barco Wide Angle Zoom EN13 Owner's manual
-
Lincoln Manufacturing 4000 Datasheet
-
Eagle Group DWN-2BI-240 Operating instructions
-
-
Hatco HDW-1R2 Installation guide
