V-ZUG 51052 Installation guide

51052
V-ZUG
Brand
V-ZUG
Model
51052
Type
Installation guide

This manual is also suitable for

V-ZUG 51052 is a versatile and user-friendly appliance that offers a range of features to enhance your refrigeration experience. With its adjustable shelves, you can customize the storage space to accommodate items of various sizes and shapes. The device also features a temperature control function, allowing you to set the ideal temperature for your food and drinks. Additionally, the V-ZUG 51052 boasts a sleek and modern design, making it a stylish addition to any kitchen.

V-ZUG 51052 is a versatile and user-friendly appliance that offers a range of features to enhance your refrigeration experience. With its adjustable shelves, you can customize the storage space to accommodate items of various sizes and shapes. The device also features a temperature control function, allowing you to set the ideal temperature for your food and drinks. Additionally, the V-ZUG 51052 boasts a sleek and modern design, making it a stylish addition to any kitchen.

Page is loading ...
V-ZUG 1
Seite 2 von 4 10138387 – H7.4063D-0
EN
Preparation for assembly of the door fronts
- Tap two holes each on the left and right in the door
fronts using template (1).
- Attach support bracket (6) to the elongated holes with
screws (7).
- Tap two holes each on the bottom left and right using
template (18).
- Attach clamp (13) to the bottom left and right of the
door fronts using screws (14).
Installation
- Place the appliance in front of the niche.
- If the refrigerator is not to be started up immediately
after assembly, put the control into the “0” position.
- Insert the plug and push the refrigerator almost
completely into the niche.
- Glue compensation profile (10) onto the outside of the
housing on the grip side.
- Hang the door fronts on levelling screws (8) and
secure with nuts (5).
- With the doors closed, push the appliance in so it is
flush with the front, through hinges (17) on the side,
and tighten the screws on the top and bottom through
attachment straightedge (19).
- Align the door fronts from the side with screws (7)
and tighten the screws.
- Adjust the height using levelling screws (8) (upper
door first, and ensure that the vertical gaps are
parallel).
- To compensate for the door loading, shift the height
levelling of the upper door upwards by 1 mm.
- Adjust the depth by pushing the door fronts into the
elongated holes.
- Tighten nuts (5).
- Insert attachment bracket (15) entirely into clamp (13)
(engagement) and screw annulated self-tapping
screws (16) into the prepunched holes on the
refrigerator.
- Attach covers (4) over the levelling device, secure
them with screws (3) and attach cover caps (2).
- Secure attachment bracket (12) to the refrigerator
door with pan head tapping screws (9) driven into the
prepunched holes, and use screws (11) to secure it to
the inner side of the
doorfront.
NL
Voorbereiding voor montage van de deurbladen
- Maak zowel links- als rechtsboven 2 gaten in de
deurbladen met de sjabloon (1).
- Bevestig de klemhaken (6) aan de langsgaten met de
schroeven (7).
- Maak zowel links- als rechtsonder 2 gaten met de
sjabloon (18).
- Bevestig de slangbeugels (13) links- en rechtsonder op
de deurbladen met de schroeven (14).
Inbouw
- Plaats het toestel voor de nis.
- Wanneer de koelkast niet meteen na de montage in
bedrijf wordt genomen, zet u de regelaar op stand „0”.
- Duw de stekker erin en schuif de kast bijna in zijn geheel
in de nis.
- Plak het compensatieprofiel (10) aan de zijde van de
handgreep op de buitenkant van de behuizing.
- Hang de deurbladen aan de stelschroeven (8) op en zet
ze met de moeren (5) vast.
- Schuif het toestel er met gesloten deuren vlak met de
voorzijde in. Schroef het aan de zijkant door de scharnieren
(17) en boven en onder door klemlinialen (19) vast.
- Lijn de deurbladen met de schroeven (7) aan de zijkant uit
en schroef ze vast.
- Stel de hoogte met de stelschroeven (8) af (eerst de
bovenste deur en let erop dat verticale kieren parallel
lopen).
- Verzet de hoogtenivellering van de bovenste deur 1 mm
naar boven ter compensatie van de deurbelasting.
- Stel de diepte af door de deurbladen in de langsgaten te
schuiven.
- Draai de moeren (5) vast.
- Schuif de bevestigingshaken (15) volledig in de
slangbeugels (13) (raster) en schroef ze met de
draadschroeven (16) aan de koelkast in de voorgestanste
gaten vast.
- Breng de afdekkingen (4) over het nivelleerapparaat aan,
bevestig ze met de schroeven (3) en plaats de
afdekkappen (2).
- Breng de bevestigingshaken (12) op de koelkastdeur aan met de plaatschroeven (9) in de voorgestanste gaten en aan de binnenzijde van
deurblad met de schroeven (11).
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

V-ZUG 51052 Installation guide

51052
V-ZUG
Brand
V-ZUG
Model
51052
Type
Installation guide
This manual is also suitable for

V-ZUG 51052 is a versatile and user-friendly appliance that offers a range of features to enhance your refrigeration experience. With its adjustable shelves, you can customize the storage space to accommodate items of various sizes and shapes. The device also features a temperature control function, allowing you to set the ideal temperature for your food and drinks. Additionally, the V-ZUG 51052 boasts a sleek and modern design, making it a stylish addition to any kitchen.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents