AWZ580

Pulsar AWZ580 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Pulsar AWZ580 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Supply power 10 V÷ 30 V DC
Output voltage UAUX = UIN ( equal to supply voltage ) Current consumption 5 mA÷ 30 mA @ UIN = 10 V ÷ 30 V DC Number of power inputs 2: a DC 5,5/2,1 outlet and a screw connector Number of power outputs 4 (AUX terminals) Protections against: - a short circuit SCP - an overload OLP - a surge - 4 x 1,0A PTC - 4 x 1,0A PTC - varistors LED indication Green LEDs L1 ÷ L4 - AUX1÷AUX4 outputs status F1 ÷ F4 fuses 4 x 1,0A PTC Operating conditions II environmental class , -10°C ÷50°C Dimensions 80 x 43 x 21 (WxHxD) Fixing a mounting tape or dowel pins x2 (holes Ć3mm) Connectors: - of power output - of power input - screw connectors Ф0,41÷1,63 (AWG 26-14) - a DC 5,5/2,1 outlet - a screw connector Ф0,41÷1,63 (AWG 26-14) Net/gross weight 0,024kg / 0,053kg Enclosure n/a, ”open frame”, IP00 Certificates, declarations CE, RoHS
AWZ580 v.1.0/IV
LB8/0,3A-0,5/FTA fuse module
CODE:
NAME:
DESCRIPTION
eight 8
The fuse module is intended for dividing power in low-voltage alarm systems (power distribution) that
require voltage within the range of: 10V ÷ 30V DC. It contains two power inputs: a screw connector and a DC
5,5/2,1 outlet and power outputs AUX1÷AUX which are independently secured with 0,5A (the possibility
of using 0,3A, not supplied) glass fuses. An activation of the fuse is indicated by an appropriate LED going
out: L1 for AUX1, L2 for AUX2 etc. Additionally, each output is secured by a varistor which protects the PSU
and the receivers against surges in the power circuit.
SPECIFICATIONS
EN
Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail:[email protected]
Fuse module
Protection / glass fuse
Pulsar
®
Supply voltage 10 V÷ 30 V DC
Output voltage UAUX = UIN (equal to supply voltage) Current consumption 5 mA÷ 30 mA @ UIN = 10 V ÷ 30 V DC Number of power inputs 2: a DC 5,5/2,1 outlet and a screw connector Number of power outputs 4 (AUX terminals) Protections against: - a short circuit SCP - an overload OLP - a surge - 4 x 1,0A PTC - 4 x 1,0A PTC - varistors LED indication Green LEDs L1 ÷ L4 – outputs status AUX1÷AUX4 F1 ÷ F4 fuses 4 x 1,0A PTC Operating conditions II environmental class, -10°C ÷50°C Dimensions 80 x 43 x 21 (WxHxD) Fixing a mounting tape or dowel pins x2 (holesĆ3mm) Connectors: - of power output - of power input - screw connectors Ф0,41÷1,63 (AWG 26-14) - a DC 5,5/2,1 outlet - a screw connector Ф0,41÷1,63 (AWG 26-14) Net/gross weight 0,024kg / 0,053kg Enclosure n/a, ”open frame”, IP00 Certificates, declarations CE, RoHS
Supply voltage
10V÷ 30V DC
Output voltage
U
AUX
= U
IN
(equal to supply voltage)
Current consumption
9 mA÷ 60 mA @ U
IN
= 10V ÷ 30V DC
Number of power inputs
2: a DC 5,5/2,1 outlet or a screw connector
Number of power outputs
8 (AUX terminals)
Protections against:
- a short circuit SCP
- an overload OLP
- a surge
- 8 x 0,5A
- 8 x 0,5A (the possibility of using 0,3A fuses, not supplied)
- varistors
LED indication
Green LEDs L1 ÷ L8 – AUX1÷AUX8 outputs status
F1 ÷ F8 fuses
8 x 0,5A
Operating conditions
II environmental class, -10°C ÷ 50°C
Dimensions
124 x 43 x 21 (WxHxD)
Fixing
a mounting tape or dowel pins x 2 (holes Ć 3mm)
Connectors:
- of power output
- of power input
- screw connectors Ф0,41÷1,63 (AWG 26-14)
- a DC 5,5/2,1 outlet or a screw connector Ф0,41÷1,63 (AWG 26-14)
Net/gross weight
0,07kg / 0,10kg
Declarations, warranty
CE, 2 year from the production date
PSU
10 V 30 V DC¸
0,3A/0,5A/1A
0,3A/0,5A/1A
/