Supply power 10 V÷ 30 V DC
Output voltage UAUX = UIN ( equal to supply voltage ) Current consumption 5 mA÷ 30 mA @ UIN = 10 V ÷ 30 V DC Number of power inputs 2: a DC 5,5/2,1 outlet and a screw connector Number of power outputs 4 (AUX terminals) Protections against: - a short circuit SCP - an overload OLP - a surge - 4 x 1,0A PTC - 4 x 1,0A PTC - varistors LED indication Green LEDs L1 ÷ L4 - AUX1÷AUX4 outputs status F1 ÷ F4 fuses 4 x 1,0A PTC Operating conditions II environmental class , -10°C ÷50°C Dimensions 80 x 43 x 21 (WxHxD) Fixing a mounting tape or dowel pins x2 (holes Ć3mm) Connectors: - of power output - of power input - screw connectors Ф0,41÷1,63 (AWG 26-14) - a DC 5,5/2,1 outlet - a screw connector Ф0,41÷1,63 (AWG 26-14) Net/gross weight 0,024kg / 0,053kg Enclosure n/a, ”open frame”, IP00 Certificates, declarations CE, RoHS
AWZ577 v.1.0/IV
LB8/0,3A/PTC fuse module
CODE:
NAME:
DESCRIPTION
eight 8
0,3A mer fuse
The fuse module is intended for dividing power in low-voltage alarm systems (power distribution) that require voltage within the
range of: 10V ÷ 30V DC. It contains two power inputs: a screw connector and a DC 5,5/2,1 outlet and power outputs AUX1÷AUX
which are independently secured with PTC poly . An activation of the PTC fuse is indicated by an appropriate LED going out:
L1 for AUX1, L2 for AUX2 etc. Additionally, each output is secured by a varistor which protects the PSU and the receivers against surges in
the power circuit.
SPECIFICATIONS
EN
Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail:sales@pulsar.pl
Fuse module
Protective / PTC
Pulsar
®
Supply voltage 10 V÷ 30 V DC
Output voltage UAUX = UIN (equal to supply voltage) Current consumption 5 mA÷ 30 mA @ UIN = 10 V ÷ 30 V DC Number of power inputs 2: a DC 5,5/2,1 outlet and a screw connector Number of power outputs 4 (AUX terminals) Protections against: - a short circuit SCP - an overload OLP - a surge - 4 x 1,0A PTC - 4 x 1,0A PTC - varistors LED indication Green LEDs L1 ÷ L4 – outputs status AUX1÷AUX4 F1 ÷ F4 fuses 4 x 1,0A PTC Operating conditions II environmental class, -10°C ÷50°C Dimensions 80 x 43 x 21 (WxHxD) Fixing a mounting tape or dowel pins x2 (holesĆ3mm) Connectors: - of power output - of power input - screw connectors Ф0,41÷1,63 (AWG 26-14) - a DC 5,5/2,1 outlet - a screw connector Ф0,41÷1,63 (AWG 26-14) Net/gross weight 0,024kg / 0,053kg Enclosure n/a, ”open frame”, IP00 Certificates, declarations CE, RoHS
Supply voltage
10V ÷ 30V DC
Output voltage
U
AUX
= U
IN
(equal to supply voltage)
Current consumption
9 mA÷ 60 mA @ U
IN
= 10V ÷ 30V DC
Number of power inputs
2: a DC 5,5/2,1 outlet or a screw connector
Number of power outputs
8 (AUX terminals)
Protections against:
- a short circuit SCP *
- an overload OLP
- a surge
- 8 x 0,3A PTC
- 8 x 0,3A PTC
- varistors
LED indication
Green LEDs L1 ÷ L8 – AUX1 ÷ AUX8 outputs status
F1 ÷ F8 fuses
8 x 0,3A PTC
Operating conditions
II environmental class, -10°C ÷ 50°C
Dimensions
124 x 43 x 21 (WxHxD)
Fixing
a mounting tape or dowel pins x2 (holesĆ 3mm)
Connectors:
- of power output
- of power input
- screw connectors Ф0,41÷1,63 (AWG 26-14)
- a DC 5,5/2,1 outlet or a screw connector Ф0,41÷1,63 (AWG 26-14)
Net/gross weight
0,051kg / 0,078kg
Declarations, warranty
CE, RoHS, 2 year from the production date
PSU
10 V 30 V DC¸
0,3A PTC
0,3A PTC
* Using power supply unit with too low current efficiency may cause (in the case of a short-circuit at one of the outputs
of the module) temporary power loss at other outputs.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Pulsar AWZ585 Operating instructions
-
-
Pulsar AWZ573 Operating instructions
-
Pulsar AWZ577 Operating instructions
-
-
-
-
-
-