Kichler Lighting 49844OZ User manual

Brand
Kichler Lighting
Model
49844OZ
Type
User manual

Kichler Lighting 49844OZ is a versatile and stylish pendant light fixture designed to elevate the ambiance of any room. Crafted with high-quality materials, this fixture features a threaded pipe for easy installation and a screw collar loop for secure attachment. The adjustable canopy allows for customized positioning, while the included chain adds a touch of elegance. This pendant light supports a variety of bulb types, providing ample lighting options to suit your needs.

Kichler Lighting 49844OZ is a versatile and stylish pendant light fixture designed to elevate the ambiance of any room. Crafted with high-quality materials, this fixture features a threaded pipe for easy installation and a screw collar loop for secure attachment. The adjustable canopy allows for customized positioning, while the included chain adds a touch of elegance. This pendant light supports a variety of bulb types, providing ample lighting options to suit your needs.

Date Issued: 08/04/16 IS-49844-US
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main fuse
box before starting and during the installation.
1) Take threaded pipe from parts bag and screw in screw
collar loop a minimum of 6 mm (1/4”). Lock into place with
hexnut.
2) Run another hexnut down threaded pipe almost touching
first hexnut. Now screw threaded pipe into mounting strap.
Mounting strap must be positioned with extruded thread
faced into outlet box. Threaded pipe must protrude out the
back of mounting strap. Screw third hexnut onto end of
threaded pipe protruding from back of mounting strap.
3) Connect mounting strap to outlet box.
4) Unscrew the threaded ring from screw collar loop. Take
canopy and pass over screw collar loop. Approximately one
half of the screw collar loop exterior threads should be
exposed. Adjust screw collar loop by turning assembly up
or down in mounting strap. Remove canopy.
5) After desired position is found, tighten both top and bottom
hexnuts up against the bottom and top of the mounting
strap.
6) Slip canopy over screw collar loop and thread on threaded
ring. Attach chain (with fixture connected) to bottom of
screw collar loop. Unscrew threaded ring, let canopy and
threaded ring slip down.
7) Weave electrical wire and ground wire through chain links
no more than 3 inches apart. Pass wire through threaded
ring, canopy, screw collar loop, threaded pipe and into out-
let box.
8) Grounding instructions: (See Illus. A or B).
A) On fixtures where mounting strap is provided with a
hole and two raised dimples. Wrap ground wire from
outlet box around green ground screw, and thread into
hole.
B) On fixtures where a cupped washer is provided. Attach
ground wire from outlet box under cupped washer and
green ground screw, and thread into mounting strap.
If fixture is provided with ground wire. Connect fixture
ground wire to outlet box ground wire with wire connector
after following the above steps. Never connect ground wire
to black or white power supply wires.
9) Make wire connections. Reference chart below for correct
connections and wire accordingly.
10) Raise canopy to ceiling.
11) Secure canopy in place by tightening threaded ring onto
screw collar loop.
12) Insert recommended bulb. (Not included)
13) Carefully, lower the glass down into the cage. Rest the bot-
tom of the glass onto the edge at the bottom of the cage.
14) Raise the cage up to the fixture roof, carefully passing the
bulb. Align the (2) holes on the cage with the (2) holes in the
fixture roof.
15) While holding the cage in place, screw in the flat-head
screws into the holes from the top side of the roof. Tighten
screws to secure into place.
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
A
B
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth) *Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
OUTLET BOX
WIRE
CONNECTOR(S)
STRAP
MOUNTING
SCREW
MOUNTING
STRAP
HEXNUT(S)
THREADED
PIPE
CANOPY
THREADED
RING
SCREW
COLLAR
LOOP
CHAIN
LOOP
FIXTURE
ROOF
(2) FLAT-HEAD
ROOF SCREWS
SOCKET
GLASS
CAGE
  • Page 1 1

Kichler Lighting 49844OZ User manual

Brand
Kichler Lighting
Model
49844OZ
Type
User manual

Kichler Lighting 49844OZ is a versatile and stylish pendant light fixture designed to elevate the ambiance of any room. Crafted with high-quality materials, this fixture features a threaded pipe for easy installation and a screw collar loop for secure attachment. The adjustable canopy allows for customized positioning, while the included chain adds a touch of elegance. This pendant light supports a variety of bulb types, providing ample lighting options to suit your needs.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents