tekmar 485 Quick Setup Manual

Type
Quick Setup Manual

This manual is also suitable for

© 2014 485_Q - 12/14
1 of 4
A Watts Water Technologies Company
tekmarNet
®
Internet Gateway 485
485_Q
12/14
Accessories
Replaces: New
Quick Setup Guide
DHCP
Set the DHCP range to start at address 10
Port Forwarding or NAT
Forward to 485 LAN static IP address example 192.168.0.2
Internal port 80
External port 80
Login to Router Setup1.
Open web browser
Open router setup page
Often located at: 192.168.0.1 or 192.168.1.1
Consult router manual or locate information on router
identification sticker
© 2014 485_Q - 12/14
2 of 4
A Watts Water Technologies Company
Click “Configuration”8.
Login7.
Remove cover2. Connect Cable to Router3.
Connect Power4.
Status LEDs5.
Web Browser6.
http://tekmargateway.local
i
n
s
t
a
l
l
e
r
t
ekma
r
Set DIP switch to Unlock
Default login: installer
Default password: tekmar
Gateway Ready
WiFi / Ethernet
Gateway Ready on solid
WiFi / Ethernet on solid
© 2014 485_Q - 12/14
3 of 4
A Watts Water Technologies Company
Click “Network”9.
WiFi TCP/IP Tab
C. Select DHCP Disabled radio button
D. Enter Local Area Network static IP address
example: 192.168.0.2
E. Subnet mask example: 255.255.255.0
F. Router example: 192.168.0.1
G. Unplug Ethernet cable.
H. Power the router off, then power back on
WiFi Network Tab
A. Scan and select WiFi network.
B. Enter WiFi password.
Ethernet Tab
A. Select DHCP Disabled radio button
B. Enter Local Area Network static IP address
example: 192.168.0.2
C. Subnet mask example: 255.255.255.0
D. Router example: 192.168.0.1
E. Power the router off, then power back on
Ethernet Option10.
WiFi Option11.
Product design, software and literature are Copyright ©2014 by
tekmar Control Systems Ltd.,
A Watts Water Technologies Company
4 of 4
All specifications are subject to change without notice.
Printed in Canada. 485_Q - 12/14.
tekmar Control Systems Ltd., A Watts Water Technologies Company.
Head Offi ce: 5100 Silver Star Road,
Vernon, B.C. Canada V1B 3K4, 250-545-7749, Fax. 250-545-0650 Web Site: www.tekmarControls.com
Install In Mechanical Room13.
485 485
Wire tN4 Bus14.
3
C1
Bus 1
4
tN4
1
C0
Boiler Bus
2
tN4
5
C2
Bus 2
6
tN4
7
C3
Bus 3
8
tN4
C tN4
Reconnect Ethernet15.
Only applies to wired Ethernet connections
Not applicable for WiFi connections
Reconnect Power16.
Inside building LAN
http://tekmargateway.local
Outside building on Internet
Enter no-ip.com hostname
Dynamic DNS12.
http://no-ip.com
Create account
Download and install Dynamic Update Client (DUC) to any computer or router on the LAN.
Login17.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

tekmar 485 Quick Setup Manual

Type
Quick Setup Manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI