Home Decorators Collection BF-20939-DG is a Triple Tilt-Out Hamper that can help you keep your laundry organized. It comes with a dirty clothing bucket, feet for stability, side panels, a stand panel, a top panel, a baffle panel, a back panel, a hinge, and a rear panel guide. The hamper can be easily assembled by following the instructions in the manual. The dirty clothing bucket can be removed for easy cleaning. The hamper also features a knob for easy opening and closing.
Collection
Home Decorators
BF-20939 HAMPTON BAY TRIPLE TIT-OUT HAMPER
ASSEMBLY INSTRUCTIONS
Made In China
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
NOTE:
UPON OPENING THOROUGHLY CLEAN ALL WOODS SURFACES TO REMOVE DUST
THE ARROWS ON THE HIDDEN CAM-LOCKS SHOULD POINT TO THE CAM-BOLTS
NOTE:
ARROW
TO PREVENT DAMAGE DURING ASSEMBLY,PLEASE ASSEMBLE THIS ITEM WITH AT
AND DIRT THAT MAY HAVE SETTLED ONTO FINISH DURING SHIPMENT.IN ORDER
AGAINST THE SURFACE OF THE PART.
ARE TIGHT, THE SHOULDER SHOULD BE
TURN THE CAM-BOLT SCREWS UNTIL THEY
ARROW
K
HOW TO USE THE CAM-TOOL
L
LEAST TWO PEOPLE.
SHOULDER
NOTE:
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
H
G
2
O
F
G
V
V
P
1
H
4
V
H1
I
1)
1
3
3
4
2
ASSEMBLE DIRTY CLOTHING BUCKET
INSERT BASE PANEL(I)INTO SLOT IN SIDE PANEL(G)INTO PANEL(H).
ATTACH SIDE PANEL(G)TO STICK PANEL(H)USING SCREWS(V).
ATTACH STICK PANEL(H)USING 6 SCREWS(V)AND ATTACH KNOB(O)UISNG SCREWS(P).
ATTACH BACK PANEL(H1)TO SIDE PANEL(G)USING SCREWS(V).
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
3).ASSEMBLE SIDE PANEL(B/B1)AND STAND PANEL(J).
ROTATE THE 8 CAM-BOLTS(L)INTO HOLES IN BOTTOM PANEL(D).
INSERT 4 DOWELS(Q)INTO HOLES IN BAFFLE PANEL(C)AND SIDE PANEL(B/B1).
PLACE CAM-BOLTS(L)INTO HOLES IN PANEL(B/B1/J)AND ATTACH USING 8 CAM-LOCK(K).
2).ASSEMBLE THE FEET(M).
ATTACH 6 FEET(M)TO BOTTOM PANEL(D)USING SCREWS(N).
Q
T
M
N
D
D
L
K
C
B1
J
J
B
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
A
V
K
4).ASSEMBLE TOP PANEL(A).
ROTATE THE 8 CAM-BOLTS(L)INTO HOLES IN TOP PANEL(A).
ATTACH BAFFLE PANEL(C)USING SCREWS(V)IN THE PREDRILLED HOLES OF TOP PANEL(A).
PLACE CAM-BOLTS(L)INTO HOLES IN PANEL(B/B1/J)AND ATTACH USING 8 CAM-LOCK(K).
L
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
W
R
G
NOTE: THE METHOD IS FIT FOR ANOTHER BUCKET.
5).
PUT THE BAG(W)INTO THE BUCKET.
INSERT THE HINGE(R)INTO HOLES IN(BUCKET)SIDE PANEL(G).
PLACE THE HINGE(R)BETWEEN INTO HOLES IN SIDE/STAND PANEL(B/B1/J).
ASSEMBLE DIRTY CLOTHING BUCKET.
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
S
E
E
X
V
6).ASSEMBLE THE BACK PANEL(E).
ATTACH THE BACK PANEL(E)AND REAR PANEL GUIDE(X)USING SCREWS(S/V).
INSERT THE BACK PANEL(E)INTO SLOT IN REAR PANEL GUIDE(X).
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
: BF-20939
: D:\Administrator
: C:\Documents and Settings\Administrator\Application
Data\Microsoft\Templates\Normal.dot
:
:
: Administrators
:
:
: 2007-3-23 10:22:00
: 3
: 2007-3-23 10:40:00
: Administrators
: 1
: 2007-3-23 10:48:00
: 10
: 41 ( )
: 239 ( )
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.