Kichler Lighting 49866WZC User manual

Brand: Kichler Lighting

Model: 49866WZC

Type: User manual

This manual is also suitable for

49865WZC

Kichler Lighting 49866WZC is a versatile lighting fixture designed for both indoor and outdoor use, particularly in wet locations. It features a sturdy construction with a threaded mounting strap and adjustable mounting screws for secure installation. The fixture allows for easy wiring connections with clear instructions for connecting black or red supply wires to black wires, white supply wires to white wires, and ground wires to green ground screws. It accommodates various types of bulbs, including those with copper or silver conductors.

Date Issued: 09/19/17 IS-49865-CB

We’re here to help 866-558-5706

Hrs: M-F 9am to 5pm EST

CAUTION – RISK OF SHOCK –

Disconnect Power at the main circuit breaker panel or main

fusebox before starting and during the installation.

1) Find the appropriate threaded holes on mounting strap[1]

that align with hole distance in canopy[2] Thread mounting

screws[3] into threaded holes starting from outlet box[4] side.

2) Attach mounting strap to outlet box with strap mounting

screws[5]. Mounting strap can be adjusted to suit position of

xture.

3) Grounding instructions: (See Illus. A or B)

 A) Onxtureswheremountingstrapisprovidedwithahole

and two raise dimples. Wrap ground wire from outlet box

around green ground screw, and thread into hole.

 B) Onxtureswhereacuppedwasherisprovided.Put

ground wire from outlet box under cupped washer and

green ground screw and thread screw into hole in mount-

ing strap.

 Ifxtureisprovidedwithgroundwire.Connectxtureground

wire to outlet box ground wire with wire connector, after follow-

ingtheabovesteps.Neverconnectgroundwiretoblackor

white power supply wires.

4) Makewireconnections.Referencechartbelowforcorrectcon-

nections and wire accordingly

5) Pushxturetowallcarefullypassingmountingscrewswith

holesincanopy.Makesureallwiresareinsidecanopyanddo

notgetpinchedbetweenwallandcanopyofxture.

6) Threadlockupknobs[6] onto mounting screws and tighten to

securexturetowall.

7) Install glass[7]byslidingupoverinstalledbulbuntilseated,

while supporting the glass, obtain the spacer[8] and slide up

intotheglassandslideoverthesocket.Nextobtainthesocket

ring[9]andscrewintoplaceoverthesocketuptothespacer.

(DO NOT over tighten.)

8) Insertrecommendedbulb(Notsupplied).

INSTRUCTIONS FOR MOUNTING FIXTURE OUTDOORS AND/

OR IN WET LOCATIONS.

9) Mountingsurfaceshouldbeclean,dry,atand1/4”larger

that the canopy on all sides. Any gaps between the mounting

surfaceandcanopyexceeding3/16”shouldbecorrectedas

required.

10) Withsiliconecaulkingcompound,caulkcompletelyaround

wherebackofcanopymeetsthewallsurfacetopreventwater

from seeping into outlet box.

GREEN GROUND

SCREW

CUPPED

WASHER

OUTLET BOX

GROUND

FIXTURE

GROUND

DIMPLES

WIRE CONNECTOR

OUTLET BOX

GROUND

GREEN GROUND

SCREW

FIXTURE

GROUND

Connect Black or

Red Supply Wire to:

Connect

White Supply Wire to:

Black White

*Parallel cord (round & smooth) *Parallel cord (square & ridged)

Clear, Brown, Gold or Black

without tracer

Clear, Brown, Gold or Black

with tracer

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

*Note: When parallel wires (SPT I & SPT II)

are used. The neutral wire is square shaped

or ridged and the other wire will be round in

shape or smooth (see illus.)

Neutral Wire

Date Issued: 09/19/17 IS-49865-CB

INSTRUCTIONS

For Assembling and Installing Fixtures in Canada

Pour L’assemblage et L’installation Au Canada

Nous sommes là pour vous aider 866-558-5706

Heures : du lundi au vendredi, de 9h à 17h (heure de l’Est)

ATTENTION – RISQUE DE DÉCHARGES ÉLECTRIQUES -

Couper le courant au niveau du panneau du disjoncteur du

circuit principal ou de la boîte à fusibles principale avant de

procéder à l’installation.

1) Find the appropriate threaded holes on mounting strap[1]

that align with hole distance in canopy[2] Thread mounting

screws[3] into threaded holes starting from outlet box[4] side.

2) Attach mounting strap to outlet box with strap mounting

screws[5]. Mounting strap can be adjusted to suit position of

xture.

3) Connecterlesls(connecteursnonfournis).Sereporterau

tableau ci-dessous pour faire les connexions.

4) Pousser le luminaire vers le mur en passant soigneusement

lesvisdemontageparlestrousdanslecache.S’assurerque

tousleslssontàl’intérieurducacheetnesontpas

pincésentrelemuretlecacheduluminaire.

5) Visserlesboulesdeblocagesurlesvisdexationetserrer

pourxerleluminaireaumur[6].

6) Installer le verre [7]englissantsurl’ampouleinstalléejusqu’à

cequ’ellesoitassise,toutensoutenantleverre,obtenir

l’entretoise[8] et glisser vers le haut dans le verre et glisser

surladouille.Ensuite,procédezàl’obtentiondeladouille[9]

etvissez-lasurladouillejusqu’àl’entretoise.(NEPASserrer

trop.)

7) Installerlaoulesampoulesrecommandées(nonfournies).

INSTRUCTIONS DE MONTAGE DE LUMINAIRE À L’EXTÉRIEUR

ET/OU DANS DES LIEUX HUMIDES.

8) Lasurfacedemontagedoitêtrepropre,sèche,plateetde0,6

cmplusépaissequelecachesurtouslescôtés.Toutécart

entrelasurfacedemontageetlecachedépassantde0,5cm

doitêtrerectiéselonlesbesoins.

9) Àl’aidedematériauxd’étanchéitéàlasilicone,calfeutrerbien

autouroùl’arrièreducacheentreencontactaveclemurpour

empêcherl’eaudepasserdanslaboîtederaccordement.

Connecter le fil noir ou

rouge de la boite

Connecter le fil blanc de la boîte

A Noir A Blanc

*Au cordon parallèle (rond et lisse)

*Au cordon parallele (à angles droits el strié)

Au bransparent, doré, marron, ou

noir sans fil distinctif

Au transparent, doré, marron, ou

noir avec un til distinctif

Fil isolé (sauf fil vert) avec

conducteur en cuivre

Fil isolé (sauf fil vert) avec

conducteur en argent

*Remarque: Avec emploi d’un fil paralléle

(SPT I et SPT II). Le fil neutre est á angles

droits ou strié et l’autre fil doit étre rond ou

lisse (Voir le schéma).

Fil Neutre

Kichler Lighting 49866WZC User manual

Brand: Kichler Lighting

Model: 49866WZC

Type: User manual

This manual is also suitable for

49865WZC

Download PDF

report

in other languages

français: Kichler Lighting 49866WZC Manuel utilisateur

Kichler Lighting 49866WZC User manual

This manual is also suitable for

Kichler Lighting 49866WZC User manual

in other languages

Related papers