2. AMF
  3. Cycone Bread Rounder

AMF Cycone Bread Rounder User manual

  • Hello! I am an AI chatbot trained to assist you with the AMF Cycone Bread Rounder User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
• Twostageroundingforprecisesphereshaping.Thecylindricalstage
initiatestheroundshapeandtheconicalstagenishesthedough
pieceintoapreciseroundshape.
• Thisrounderisdesignedtoprovideprecisedoughroundingfora
widerangeofbreaddoughsincludingspecialty,wholewheat,rye,
cinnamonraisinandwhite.
• 1¾,2¼,2½CCWturnsavailable
CYCONE BREAD ROUNDER
CYCONE BREAD ROUNDER
FEATURES & BENEFITS
MECHANICAL FEATURES
MECHANICAL OPTIONS
• ACadjustablespeedinfeedconveyor
• Infeeddeectorroller
• ACadjustablespeeddischargeconveyor
• ACadjustablespeeddischargekickerroller
• ACadjustablespeed,removable,highcapacity
ourduster
FrameAssembly
• Paintedsteel,widebasesupportstructureandstainlesssteelguards
• Rigidstainlesssteelupperframetubingstructure
• Stainlesssteelcatchpan
RoundingSystem
• Adjustablespeed,5HPmotorwithVbeltdrivesystem
• Non-stickcoated,machinedsteelconeonstainlesssteelshaftand
heavydutybearings
• Non-stickcoated,adjustablealuminumtracks
• Non-stickcoated,stainlesssteeldoughballdischargechute(90°)
Non-Stick Coated
Combination Cylindrical
and Conical Rounding
Surface with Adjustable
Rounding Track
V Belt AC Cone Drive
• Combinedactionofcylindricalandconicalroundingforperfectdoughballshape.Theroundnessofthedough
pieceiscriticaltopropersheetingandmouldingprocess.Italsohelpssealthefermentationgasesinside
doughball.Thisdirectlyaffectsproductqualityandprocessperformance.
• Aggressiveconeanglewith54"(1372mm)diameterbaseincreaseseffectiveroundingpath
• Specialnon-stickcoatingandplasticmaterialsfordoughcontactsurfacesimproveproductqualityand
minimizedustingourusageandfacilitatecleaning
• Independent,adjustabletroughsectionsallowroundingtrackwidthadjustmentforwiderrangeofproduct
sizes
• Independent"shaftmount"driveseliminatedrivechains,reducingmaintenance
• Wide,heavydutysupportframeprovidesgreaterconestabilityreducingwastefrom"runout"
Optional AC Drive
Kicker Roller, Discharge
Conveyor & Flour Sifter
SPECIFICATIONS
Throughputrange:
Scalingrangefrom12oz.(340g)to40oz.
(1134g)at65lbs/ft
3
doughdensity
Roundingtracklength:
13/4turnmodel-256"(6052mm)
21/4turnmodel-316"(8026mm)
21/2turnmodel-340"(8636mm)
Upto180unitspermachinedependingonscaling
weightandproduct
Electricalrequirements:
17KVA
Standardvoltage-460volts/3phases/60Hz
(othervoltagesavailable)
ControlPower-24VDCinputs/120VACoutputs
ApproximateDimensions:
88"Lx53"Wx56"H(2235mmx1346mmx1422mm)
Infeedheightapproximately33"(838mm)
DischargeHeight:
13/4turnmodel-approximately501/2"(1283mm)
21/4turnmodel-approximately581/2"(1486mm)
21/2turnmodel-approximately621/2"(1588mm)
ApproximateShippingWeight:
3000lbs.(1361kg)
ELECTRICAL FEATURES
ELECTRICAL OPTIONS
OperatorpanelisstainlesssteelNEMA4ratedandcontainsthefollowing:
• AllenBradleyPanelView300operatorinterfacewhichdisplays:
-Machinestartandstop
-Operationspeed
-Status,alarmandhistorymessages
• AllenBradleypushbuttonsforthefollowingfunctions:
-Alarmacknowledge/reset
-MCRreset
-Emergencystop
NEMA12enclosure(paintedsteel)including:
• Mainpowerdisconnect
• AllenBradleyMicroLogix1100programmablelogiccontroller
• AllenBradleyACinverterformaindrive
• NEMA4Xstainlesssteelmainelectricalenclosure
• Processorandoperatorinterfaceupgrades
Machine Mounted
Operator Control Station
06/2008
CYCONE BREAD ROUNDER
Europe Ofce:
West Park Ring Road
Leeds LS16 6QQ
England
Tel: 44-1132-787110
Fax: 44-1132-741415
sales-europe@amfbakery.com
1-800-BAKERS-1
www.amfbakery.com
FOR MORE INFORMATION PLEASE CALL YOUR ACCOUNT MANAGER OR
AMF’s focus on continuous improvement may result
in changes to machinery specications without notice.
Asia Ofce:
Room 801 A-Building
Thunis Dev. Building
No. 11 Hui Xin East St.
Chaoyang District
Beijing, China 100029
Tel: 86-10-64823613
Fax: 86-10-64934259
sales-asia@amfbakery.com
Headquarters:
2115 W. Laburnum Ave.
Richmond, Virginia 23227
Tel: 1-800-225-3771
or 1-804-355-7961
Fax: 1-804-342-9724
sales@amfbakery.com
DIMENSIONAL DRAWING
58 1/2"
DISCHARGE HEIGHT
33"
51 5/16"
78 11/16"
INFEED HEIGHT
SQUARE
78 1/4"
79 1/2"
90°
INFEED
DISCHARGE
/