Datalogic Formula F7400 User manual

F7400 -

User Manual

ENGLISH

N2468

Datalogic reserves the right to make modifications and improvements without prior notification.

Product names mentioned herein are for identification purposes only and may be trademarks and or regis-

tred trademarks of their respective companies.

©

- 1997, 1998, 1999, 2000 Datalogic S.p.A.

DATALOGIC S.p.A.

Secondary Unit - IDWare Division

Via Guglielmo Marconi, 161 - 31021 Mogliano Veneto (TV) - Italy

Tel. +39 (041) 5986511 - Fax +39 (041) 5986550

F7400 - User Manual

Ed.: 06/00

Code: 820040362

CONTENTS

1

GENERAL INFORMATION

.......................................................................... 1

1.1. SCOPE OF THE MANUAL

.................................................................................. 1

1.2. ENCLOSED DOCUMENTS

................................................................................. 2

1.3. PACKAGE CONTENTS

...................................................................................... 2

1.4. TERMINAL MANUFACTURER AND MODEL IDENTIFICATION

......................... 3

2

TECHNICAL INFORMATION

....................................................................... 4

2.1. F7400 TERMINAL DESCRIPTION

..................................................................... 4

2.2. TECHNICAL CHARACTERISTICS

...................................................................... 6

3

SAFETY REGULATIONS

............................................................................... 9

3.1. GENERAL SAFETY RULES

.................................................................................. 9

3.2. LASER SAFETY

................................................................................................. 10

3.3. FCC COMPLIANCE - INFORMATION FOR THE USER

..................................... 13

4

CONNECTIONS

............................................................................................ 14

4.1. CRADLES

......................................................................................................... 14

4.1.1. F970 Cradle

....................................................................................... 16

4.1.2. F970 Vehicle Cradle

.......................................................................... 17

4.2. TERMINAL CONNECTION TO THE HOST COMPUTER

................................... 19

4.2.1. RS-232 Connection via Cradle

......................................................... 19

4.2.2. RS-232 Direct Connection

................................................................ 20

4.2.3. Other Connections

............................................................................ 21

4.3. CONNECTION CABLES

................................................................................... 24

5

BIOS SETUP MENU

..................................................................................... 27

5.1. GENERAL INFORMATION

............................................................................... 27

5.2. ACTIVATING THE SETUP PROCEDURE

........................................................... 28

5.3. PASSWORD

..................................................................................................... 29

5.4. THE SETUP MENU AND ITS CONFIGURABLE ITEMS

..................................... 29

5.5. CHANGING THE VALUES OF THE MENU ITEMS

........................................... 30

CONTENTS

5.6. STRUCTURE OF THE SETUP PAGES FOR THE F7400 TERMINAL

AND DESCRIPTION OF THE SETUP ITEMS

.....................................................31

5.6.1. Console

..............................................................................................31

5.6.2. Devices

...............................................................................................32

5.6.3. Power Management

..........................................................................32

5.6.4. Activities

.............................................................................................33

5.7. EXIT MENU

......................................................................................................34

5.8. EXIT FROM THE SETUP PROCEDURE

..............................................................34

5.9. DEFAULT VALUES

............................................................................................35

6

USE AND FUNCTIONING

...........................................................................36

6.1. TERMINAL START-UP

......................................................................................36

6.2. BAR CODE SCANNING

....................................................................................37

6.3. DESCRIPTION OF THE KEYS (37-KEY MODELS)

.............................................38

6.4. DESCRIPTION OF THE KEYS (24-KEY MODELS)

.............................................46

6.5. PROTECTED RESET BUTTON

...........................................................................53

7

MAINTENANCE AND DIAGNOSTICS

.....................................................54

7.1. CHARGING THE BATTERIES

............................................................................54

7.2. REPLACING THE BATTERIES

............................................................................55

7.3. CLEANING THE TERMINAL

..............................................................................56

A

PRODUCTS AND ACCESSORIES OF

THE FORMULA 7400 LINE

.......................................................................57

B

TERMINAL EMULATION KEYBOARD OVERLAYS

..............................59

Ed.: 06/00

1

1.1. SCOPE OF THE MANUAL

This manual was compiled by Datalogic S.p.A. and accompanies the Formula 7400.

The information contained here is divided into two parts:

-

Chapters 1, 2, 3, 6:

which define the F7400 terminal’s characteristics and methods of use; these

chapters are for whomever uses the terminal in their day to day work activity.

-

Chapters 4, 5, 7:

which define the connection methods for the F7400 terminal. These chapters are

aimed at the person responsible for managing the F7400 terminals, generally the

person who installs the network and the application program.

F7400 - USER MANUAL

_________________________________________________________

1

Ed.: 06/00

2

1.2. ENCLOSED DOCUMENTS

The documents listed in the following table are enclosed with the manual.

- Declaration of conformity

- Test chart

- Menu & commands booklet

1.3. PACKAGE CONTENTS

The F7400 terminal package contains:

- No. 1 F7400 terminal;

- No. 1 user’s manual and attached documentation;

- No. 1 rechargeable battery pack or 1 container for alkaline batteries;

- No. 1 floppy disk containing the software ROM-DOS 6.22 Datalight and relative

documentation;

- No. 4 Keyboard overlays ( for 37-Key RF versions).

Any other packages will contain the accessories necessary for the F7400 terminal

connection to the host computer and to the network: the cradle, power supply,

and one or more connection cables.

Remove all the components from their packaging, check their integrity and

congruity with the packing documents.

Keep the original packaging for use when sending products to the

technical assistance centre. Damage caused by improper

packaging is not covered under the warranty.

Rechargeable battery packs (NiMH) are not initially charged.

Therefore the first operation to perform is to charge them in the

appropriate cradle. See paragraphs 7.2 and 4.1.

GENERAL INFORMATION

________________________________________________________

1

Ed.: 06/00

3

1.4. TERMINAL MANUFACTURER AND MODEL IDENTIFICATION

Model identification

and serial number

37-Key models 24-Key models

Ed.: 06/00

4

2

2.1. F7400 TERMINAL DESCRIPTION

The Formula 7400 is the new Hand-held PC with integrated laser scanner based on

PC technology designed by Datalogic S.p.A.

The Formula 7400 is capable of reading all common barcode symbologies.

The Formula 7400 is equipped with an IrDA port for short-range wireless infrared

communication with portable printers and other devices that support this kind of

interface

The Formula 7400 is equipped with a back-lighted LCD graphic display, 96 x 64

pixel resolution, and an ergonomic alphanumeric keyboard (24 or 37 keys).

TECHNICAL INFORMATION ______________________________________________________

2

Ed.: 06/00

5

Key:

A) Laser beam output window

B) Programmable two-color LED

C) Keyboard

D) Protected reset button

E) F970-cradle communication window

F) Contacts for the recharging the batteries

G) Direct RS-232 connection cover (see "RS-232 Direct Connection" on page 20)

A

B

D

C

F

E

G

F7400 - USER MANUAL _________________________________________________________

2

Ed.: 06/00

6

2.2. TECHNICAL CHARACTERISTICS

❏ Optical Characteristics - laser 1D

❏ Electrical characteristics

❏ Physical characteristics

Light source laser scanner VLD source, 670 nm

Scan rate 36 ± 3 scan/sec

Minimum resolution 0.13 mm

Skew angle ± 65°

Pitch angle ± 55°

Depth of field

(depends on the type and density of the code)

30 to 800 mm

Micro-controller 32 bit - AMD 486

Disk memory 2/4 MB (512 K used for BIOS-DOS)

RAM 2/8 MB DRAM

EEPROM 256 Bytes

Calendar/clock quartz RTC, time and date programma-

ble with automatic management of

leap years.

Power supply NiMH battery pack, 1500 mAh or 3 AA

alkaline batteries.

Battery charger Formula 970

Technology SMT (Surface Mounting Technology)

Dimensions (LxWxH) 176 x 61 x 36 mm

Weight 305 grams with NiMH batteries

Buzzer piezoelectric buzzer

LED Red/green LED

Display high contrast display , graphic LCD

with 96x64 dot matrix, back-light

Keyboard 24 or 37 silicone covered rubber keys plus

reset.

TECHNICAL INFORMATION ______________________________________________________

2

Ed.: 06/00

7

❏ Environmental Conditions

❏ Programming

Temperature operating 0 to +45 °C;

storage (without battery) -20 to

+60 °C;

Relative Humidity 95% without condensation

Degree of protection sealed against rain and dust

Electrostatic discharge IEC 1000-4-2 (up to 15KV on air)

Resistance to falls IEC 68-2-32 (up to 1.2 m on concrete)

Safety standards IEC 825-1 class 2 laser product

CDRH class 2 laser product

Operating system DOS 6.22

Decoded bar codes - laser 1D EAN-8, + ADD-ON-2, + ADD-ON-5

EAN-13, + ADD-ON-2, + ADD-ON-5

UPC/A, + ADD-ON-2, + ADD-ON-5

UPC/E, + ADD-ON-2, + ADD-ON-5

ITALIAN PHARMACEUTICAL

CODABAR - MONARCH - NW7 - 2 OF 7

CODE 39 STANDARD

CODE 39 FULL ASCII

CODE 39 CIP

CODE 2/5 INTERLEAVE

CODE 2/5 INDUSTRIAL

CODE 128

EAN 128

MSI

CODE 93

F7400 - USER MANUAL _________________________________________________________

2

Ed.: 06/00

8

❏ Communication characteristics

❏ RF Communication Characteristics

Optical Interface IrDA 1.0

F970 Interface cradle-terminal interface via IrDA

Cradle-Host Interface RS-232

RS-485

Eavesdrop

Maximum speed of transmission 115 Kbit/sec max

Frequency 2.4 GHz

Power output 100 mW Max

In compliance with ETS 300-328

Ed.: 06/00

9

3

3.1. GENERAL SAFETY RULES

- Use only the components supplied by the manufacturer for the specific F7400

terminal being used. The use of cradles other than those supplied with the F7400

terminal or indicated in the list in the appendix could cause serious damage to

the F7400 terminal.

- Do not attempt to disassemble the F7400 terminal, as it does not contain parts

that can be repaired by the user. Any tampering will invalidate the warranty.

- When replacing the batteries or at the end of the operative life of the F7400

terminal, disposal must be performed in compliance with the laws in force..

- Do not submerge the F7400 terminal in liquid products.

Read this manual carefully before performing any type of

connection or repair on the F7400 terminal.

The user is responsible for any damages caused by incorrect use of

the equipment or by inobservance of the indication supplied in this

manual.

F7400 - USER MANUAL _________________________________________________________

3

Ed.: 06/00

10

3.2. LASER SAFETY

The laser light is visible to the human eye and is emitted from the window indicated

in the figure.

Be sure the laser warning label applied to the terminal is readable

at all times. If necessary, replace it with a new one.

I D F E

La luce laser è visibile

all’occhio umano e

viene emessa dalla fin-

estra indicata nella fig-

ura.

Die Laserstrahlung ist

für das menschliche

Auge sichtbar und wird

am Strahlaustrittsfenster

ausgesendet (siehe Bild).

Le rayon laser est visible

à l’oeil nu et il est émis

par la fenêtre désignée

sur l’illustration dans la

figure.

a luz láser es visible al ojo

humano y es emitida por

la ventana indicada en

la figura.

LUCE LASER

NON FISSARE IL FASCIO

APPARECCHIO LASER DI

CLASSE 2

MASSIMA POTENZA

D’USCITA:

LUNGHEZZA D’ONDA

EMESSA:

CONFORME A IEC 825-1

(1993)

LASERSTRAHLUNG

NICHT IN DEN STRAHL

BLICKEN

PRODUKT DER

LASERKLASSE 2

MAXIMALE

AUSGANGSLEISTUNG:

WELLENLÄNGE:

ENTSPR. IEC 825-1

(1993)

RAYON LASER

EVITER DE REGARDER

LE RAYON

APPAREIL LASER DE

CLASSE 2

PUISSANCE DE SORTIE:

LONGUEUR D’ONDE

EMISE:

CONFORME A IEC 825-1

(1993)

RAYO LÁSER

NO MIRAR FIJO EL RAYO

APARATO LÁSER DE

CLASE 2

MÁXIMA POTENCIA DE

SALIDA:

LONGITUD DE ONDA

EMITIDA:

CONFORME A IEC 825-1

(1993)

CAUTION

Laser beam output window

SAFETY REGULATIONS__________________________________________________________

3

Ed.: 06/00

11

ENGLISH

The following information is provided to comply with the rules imposed by

international authorities and refers to the correct use of your terminal.

STANDARD LASER SAFETY REGULATIONS

This product conforms to the applicable requirements of both CDRH 21 CFR 1040

and IEC 825-1 at the date of manufacture.

For installation, use and maintenance, it is not necessary to open the device.

The product utilises a low-power laser diode. Although staring directly at the laser

beam momentarily causes no known biological damage, avoid staring at the beam

as one would with any very strong light source, such as the sun. Avoid that the laser

beam hits the eye of an observer, even through reflective surfaces such as mirrors,

etc.

ITALIANO

Le seguenti informazioni vengono fornite dietro direttive delle autorità

internazionali e si riferiscono all’uso corretto del terminale.

NORMATIVE STANDARD PER LA SICUREZZA LASER

Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla

data di produzione: CDRH 21 CFR 1040 e IEC 825-1.

Non si rende mai necessario aprire l’appa-recchio per motivi di installazione, utilizzo

o manutenzione.

Il prodotto utilizza un diodo laser a bassa potenza. Sebbene non siano noti danni

riportati dall’occhio umano in seguito ad una esposizione di breve durata, evitare

di fissare il raggio laser così come si eviterebbe qualsiasi altra sorgente di luminosità

intensa, ad esempio il sole. Evitare inoltre di dirigere il raggio laser negli occhi di un

osservatore, anche attraverso superfici riflettenti come gli specchi.

Use of controls or adjustments or performance of procedures

other than those specified herein may result in exposure to

hazardous visible laser light.

L’utilizzo di procedure o regolazioni differenti da quelle descritte

nella documentazione può provocare un’esposizione pericolosa a

luce laser visibile.

F7400 - USER MANUAL _________________________________________________________

3

Ed.: 06/00

12

DEUTSCH

Die folgenden Informationen stimmen mit den Sicherheitshinweisen überein, die

von internationalen Behörden auferlegt wurden, und sie beziehen sich auf den

korrekten Gebrauch vom Terminal.

NORM FÜR DIE LASERSICHERHEIT

Dies Produkt entspricht am Tag der Herstellung den gültigen IEC 825-1 und CDRH

21 CFR 1040 Normen für die Lasersicherheit.

Es ist nicht notwendig, das Gerät wegen Betrieb oder Installations-, und

Wartungs-arbeiten zu öffnen.

Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit keine Augenschäden von

kurzen Einstrahlungen bekannt sind, sollten Sie es vermeiden für längere Zeit in den

Laserstrahl zu schauen, genauso wenig wie in starke Lichtquellen (z.B. die Sonne).

Vermeiden Sie es, den Laserstrahl weder gegen die Augen eines Beobachters, noch

gegen reflektierende Oberflächen zu richten.

FRANÇAIS

Les informations suivantes sont fournies selon les règles fixées par les autorités

internationales et se refèrent à une correcte utilisation du terminal.

NORMES DE SECURITE LASER

Ce produit est conforme aux normes de sécurité laser en vigueur à sa date de

fabrication: CDRH 21 CFR 1040 et IEC 825-1.

Il n’est pas nécessaire d’ouvrir l’appareil pour l’installation, l’utilisation ou

l’entretien.

Le produit utilise une diode laser. Aucun dommage aux yeux humains n’a été

constaté à la suite d’une exposition au rayon laser. Eviter de regarder fixement le

rayon, comme toute autre source lumineuse intense telle que le soleil. Eviter aussi

de diriger le rayon vers les yeux d’un observateur, même à travers des surfaces

réfléchissantes (miroirs, par exemple).

Jegliche Änderungen am Gerät sowie Vorgehensweisen, die nicht

in dieser Betriebsanleitung beschrieben werden, können ein

gefährliches Laserlicht verursachen.

L’utilisation de procédures ou réglages différents de ceux donnés

ici peut entrainer une dangereuse exposition à lumière laser visible.

SAFETY REGULATIONS__________________________________________________________

3

Ed.: 06/00

13

ESPAÑOL

Las informaciones siguientes son presentadas en conformidad con las disposiciones

de las autoridades internacionales y se refieren al uso correcto del terminal.

NORMATIVAS ESTÁNDAR PARA LA SEGURIDAD LÁSER

Este aparato resulta conforme a las normativas vigentes de seguridad láser a la

fecha de producción: CDRH 21 CFR 1040 y IEC 825-1.

No es necesario abrir el aparato para la instalación, la utilización o la manutención.

El aparato utiliza un diodo láser a baja potencia. No son notorios daños a los ojos

humanos a consecuencia de una exposición de corta duración. Eviten de mirar fijo

el rayo láser así como evitarían cualquiera otra fuente de luminosidad intensa, por

ejemplo el sol. Además, eviten de dirigir el rayo láser hacia los ojos de un

observador, también a través de superficies reflectantes como los espejos.

3.3. FCC COMPLIANCE - INFORMATION FOR THE USER

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

La utilización de procedimientos o regulaciones diferentes de

aquellas describidas en la documentación puede causar una

exposición peligrosa a la luz láser visible.

This device complies with PART 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference which may cause

undesired operation.

Ed.: 06/00

14

4

4.1. CRADLES

With the F7400 terminal, both the standard cradle F970 and the vehicle version can

be used.

Key F970 cradle:

A) IrDA window

B) Two-color LED – spare battery slot

C) F7400 terminal battery - recharge contacts

D) Connectors for host computer connections

E) Power jack

A

B

C

D

E

D

CONNECTIONS ________________________________________________________________

4

Ed.: 06/00

15

Key F970 vehicle cradle:

A) Cradle retaining clip

B) Metal bracket

A

B

F7400 - USER MANUAL _________________________________________________________

4

Ed.: 06/00

16

4.1.1. F970 Cradle

The F970 cradle is a battery charger and also functions as a serial communication inter-

face between the host computer and the IrDA optical interface on the F7400 terminal.

By inserting the F7400 terminal into the

cradle as shown in the figure, its batteries can

be charged.

The LED indicates the status of the batteries in

the terminal:

COLOR DESCRIPTION

Constant red Battery charging

Flashing

red/green

Battery charged, F7400 ter-

minal on

Constant

green:

Battery charged, F7400 ter-

minal off or not inserted in

the cradle

LED

Page is loading ...

Datalogic Formula F7400, Formula User manual

Related papers

Other documents