SMC SMCWSP-100 User manual

Brand: SMC

Model: SMCWSP-100

Type: User manual

This manual is also suitable for

IP Phone SMCWSP-100

USB/Power

Charge Port

Headset

Jack

Alphanumeric

Keypad

Navigation

Key

Right

Soft Key

Left

Soft Key

End/Power

Key

LCD

Display

Volume

Button

Send

Key

SMCWSP-100

Wi-Fi SIP Phone

Quick Start Guide

E022007-EK-R01

150200035400E

The SMCWSP-100 is a Wi-Fi (IEEE 802.11b/g) wireless phone that

enables you to make Voice over Internet Protocol (VoIP) calls without

using a computer. The phone enables you to use your Session Initiation

Protocol (SIP) VoIP service with complete mobility, allowing you to talk

from any location where you have a network connection through a

nearby access point.

Package Checklist — The SMCWSP-100 Wi-Fi SIP Phone package

includes these items:

• One Wi-Fi SIP Phone (SMCWSP-100)

• One Lithium-Ion battery

• One headset

• One mini USB cable

• One AC power charger

• Quick Start Guide

• Documentation CD

Inform your dealer if there are any incorrect, missing or damaged items.

If possible, retain the carton, including the original packing materials.

Use them to repack the product in case there is a need to return it.

Getting Started — After unpacking the Wi-Fi SIP Phone, you must

install and charge the battery pack before turning on the phone. Just

follow the steps in this guide.

Before preparing the Wi-Fi SIP Phone for use, first become familiar with

its main keys, buttons, and other hardware features.

1. LCD Display — Color software menu display.

2. Navigation Key — Four-direction software navigation key.

Pressing the key down selects the current option.

3.Right Soft Key — Negative action key. Cancels or returns to

previous menu.

4. End/Power Key — Ends an active call. Turns the power on and off.

Press for more than two seconds to power the phone on. Press for

more than four seconds to power the phone off.

5. Headset Jack — Jack for headset connection.

6. USB/Power Charge Port — Power charger connection for

charging battery.

7. Alphanumeric Keypad — Includes 0-9, A-Z, *, and # keys. The

[a/A *] key selects upper- or lower-case characters, numbers, or

hexadecimal. The [ 1 ] key selects common punctuation marks

during text input. The [ # ] key selects special characters and

symbols during text input.

8.Send Key — Calls a selected contact.

9.Left Soft Key — Positive action key. Selects menu option.

10. Volume Button — Adjusts volume of the speaker.

Keypad Lock — The phone keypad can be locked by pressing the Left

Soft Key (Options) and then the Navigation Key. Pressing the Left Soft

Key and then the [a/A *] key unlocks the keypad.

Warning: Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

1. Remove Battery Compartment Cover — Place the phone face

down. Push and slide down the battery compartment cover until it

becomes free.

2. Install Battery — Place the battery into the compartment. Be sure the

text label on the battery is facing out and the battery’s three metal

contacts point to the top of the phone.

3. Replace Battery Compartment Cover — Slide the battery

compartment cover back onto the phone until it clicks firmly into place.

4. Connect Battery Charger — Lift up the rubber cover on the mini

USB charger port and connect the power charger to the port. Then, plug

the charger into an AC electrical outlet.

Push Off

Install Battery

5. Fully Charge Battery — For the first time use, allow eight hours to

fully charge the battery.

Note: For the first time use, please wait until the phone is fully charged

before powering on. When the phone is fully charged, the

symbol is displayed.

After the first-time charge, the battery requires only three hours to

charge.

Note: The power charger automatically adjusts to any voltage between

100-240 volts at 50 or 60 Hz.

6. Power On Phone — Push and hold down the End/Power key for

more than two seconds to power on the phone.

Allow 30 seconds for the phone to start up.

Turn to the back page to learn how to make initial settings and start

using the phone.

INTRODUCTION

INSTALLATION

TECHNICAL SUPPORT

From U.S.A. and Canada:

(24 hours a day, 7 days a week)

(600) SMC-4-YOU

Phn: (949) 679-8000

Fax: (949) 679-1481

From Europe:

Contact details can be found on

http://www.smc.com

World Wide Web:

http://www.smc.com

If you are looking for further contact

information, please visit

http://www.smc.com

38 Tesla

Irvine, CA 92618

Phone: (949) 679-8000

Driver updates:

http://www.smc.com/index.cfm?event=downloads.searchCriteria&localeCode=EN_USA

Model Number: SMCWSP-100

Information furnished by SMC Networks, Inc. (SMC) is believed to be

accurate and reliable. However, no responsibility is assumed by SMC for

its use, nor for any infringements of patents or other rights of third parties,

which may result from its use. No license is granted by implication or

otherwise under any patent or patent rights of SMC. SMC reserves the

right to change specifications at any time without notice.

registered trademark; EZ Connect and Barricade are trademarks of SMC

Networks, Inc. Other product and company names are trademarks or

registered trademarks of their respective holders.

vm1188t-17_QSG.fm Page 1 Thursday, February 15, 2007 3:34 PM

The Wi-Fi SIP Phone requires a wireless connection to a Wi-Fi network

access point to operate. In addition, the access point network must

provide access to a VoIP SIP server, either on the local network or over

the Internet, to be able to make calls.

Connect to a Wi-Fi Network — When the Wi-Fi SIP Phone is used for

the first time, you must set up a Wi-Fi network connection. Follow these

steps:

1. Press the Navigation Key to select the main

menu.

2. From the main menu, select Network

Settings.Then, from the Network Settings

menu, select “Wireless Network.”

3. Press the Left Soft Key to select the options,

then select “New.”

4. In the New Profile screen, move the

Navigation Key down to highlight “Scan,”

then press down to perform a search for

nearby Wi-Fi networks.

5. A list of detected Wi-Fi networks displays.

From the list, select the wireless network that

you want to connect to and press down on

the Navigation Key.

Normally, you need to be within 90 m (300 ft)

of a network’s wireless access point to be

able to connect to it. If the network you want

to connect to is not on the list, move to

another location and try again.

6. The New Profile screen displays again with

the Wi-Fi network name already configured.

You can change other settings for the

wireless network, such as IP address

configuration. (The default setting is DHCP.)

If authentication is required by the network,

select the authentication type and enter the

encryption key value, as provided by the

wireless network operator.

The wireless network information is retained in the Wireless

Configuraion list. The wireless networks in the list are stored in the

phone’s memory and will be used every time the phone is powered

on.

Set Up VoIP Details — Once you have established a network

connection, you need to enter your SIP account details as provided by

your SIP service provider. Follow these steps:

1. Press the Navigation Key to select the main

menu. From the main menu, select Network

Settings, and then select “VoIP.”

2. From the VoIP Setting menu, select the

profile to configure, then press the Left Soft

Key to access the Options menu. Select

View/Edit.

3. On the VoIP configuration, enter details as

provided by your SIP service provider. The

minimum SIP details required are:

• Phone Number — Your SIP account phone

number.

• Auth Name — Your SIP account username

that uniquely identifies you to the SIP server.

• Auth Password — An alphanumeric string

that uniquely identifies the SIP user’s

permission rights.

• SIP Proxy address — The Domain name or IP address of the SIP

proxy server.

• SIP Proxy port — The proxy server port number, normally 5060.

• SIP Registrar Address — The Domain name or IP address of the

SIP registrar server.

• SIP Registrar Port — The SIP registrar server port number.

When you finish configuring the VoIP details, the phone will restart

automatically. When the phone has restarted, it automatically connects

to the wireless network and logs into the SIP proxy server.

For detailed instructions on setting up preferred networks, refer to the

User Guide that is on the included Documentation CD.

The Wi-Fi SIP Phone’s color LCD display provides various status

indicators and access to the menu-based interface. The illustration

below shows the main screen and its elements.

Battery Status — Indicates the status of the battery. Shows a fully

charged or partially charged level, and when charging.

Network Status — Indicates the status of the Wi-Fi network connection

or the current connected network.

IP Status — Indicates the network IP status or current IP address of the

phone.

SIP Status — Indicates the SIP service status.

Wireless Signal Status — Indicates the strength of the Wi-Fi network

signal.

Current Time — The current time set on the phone. You can set the

phone’s time and date by using the Menu to select “Phone Settings” and

then “Date/Time.”

Navigation Key Action — The action that happens when you press

down on the Navigation Key. Typically, the Navigation Key selects the

current menu item or confirms a setting. From the main screen, this

provides access to the main menu.

Right Soft Key Action — The action that happens when you press the

Right Soft Key. Typically, the Right Soft Key cancels the last action or

returns to the previous menu.

Left Soft Key Action — The action that happens when you press the

Left Soft Key. Typically, the Left Soft Key selects the Options menu.

The main menu provides access to all network and phone settings, plus

other features. The menus are easy to move through using the four-way

Navigation key. Just move the Navigation key up or down to highlight a

menu item, then push down on the key to select it.

The following table outlines the phone menu structure.

To make a VoIP call, follow these steps:

1. Press the keypad keys to directly enter the

number you want to call.

2. Press the Send button to make the call. Wait

for the call to connect and be answered.

3. While the call is in progress, the contact

number and length of time the call is active

are displayed.

4. When you have finished the call, press the

End button.

Battery Status

Right Soft

Key Action

Wireless

Signal Status

Left Soft

Key Action

Current Time

Navigation

Key Action

IP Status

Network Status

SIP Status

Menu Description

Call History Lists missed calls, incoming and outgoing calls

Contacts Your contacts list

Applications Access to other phone features

Phone Settings Access to phone settings and call features

Network Settings Network configuration, SIP settings, and current

wireless network status

Calendar Access to the calendar application

THE PHONE’S LCD DISPLAY

INITIAL SET UP

THE MAIN MENU

MAKING A CALL

vm1188t-17_QSG.fm Page 2 Thursday, February 15, 2007 3:34 PM

SMC SMCWSP-100 User manual

Brand: SMC

Model: SMCWSP-100

Type: User manual

This manual is also suitable for

IP Phone SMCWSP-100

Download PDF

report

SMC SMCWSP-100 User manual

This manual is also suitable for

SMC SMCWSP-100 User manual

Other documents