2. Vega
  3. VEGAMAG 81

Vega VEGAMAG 81 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Vega VEGAMAG 81 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Supplementary instructions
Magnetic level gauge for continuous
level measurement in bypass pipes
VEGAMAG 81
Document ID: 44905
2
Contents
VEGAMAG 81 •
44905-EN-190118
Contents
1 Product description ................................................................................................................. 3
1.1 Conguration
.................................................................................................................... 3
2 Mounting ................................................................................................................................... 6
2.1 Mountinginstructions ....................................................................................................... 6
3 Supplement .............................................................................................................................. 7
3.1 Technicaldata .................................................................................................................. 7
3.2 Dimensions
...................................................................................................................... 9
Editingstatus:2019-01-17
3
1Productdescription
VEGAMAG 81 •
44905-EN-190118
1 Product description
1.1 Conguration
TheVEGAMAG81isabypasspipewithmagneticlevelgauge(refer-
encevessel).
0 %
100 %
A
M
C
E
B
B
D
1
Fig. 1: Typical conguration of the VEGAMAG 81
1 Magnetic level gauge
A Chamber closing - top
B Vessel connection top/bottom
C Chamber closing - bottom
D Drain connection
E Vent connection (optional)
M Dimension: Pipe center to pipe center
Thefollowingversionsarepossible:
Featuresandttingsof
thebypasspipe
Versions
4
1Productdescription
VEGAMAG 81 •
44905-EN-190118
130mm (A) / 100 mm (B)
(5.12" (A) / 3.94" (B) )
X
A
M
U
C
E
B
B
D
Fig. 2: Versions VEGAMAG 81
1 Version: Side - Side (two connections)
A Chamber closing - top
B Vessel connection top/bottom
C Chamber closing - bottom
D Drain connection
E Vent connection (optional)
M Dimensions: pipe center to pipe center, 300 … 4000 mm (11.8 … 157.5 in)
U Dimension: Pipe center to ange surface of the lower chamber closing (depending on the density of the
medium)
X Dimensions: length from pipe center to connection ange, 150 … 400 mm (5.91 … 15.75 in)
5
1Productdescription
VEGAMAG 81 •
44905-EN-190118
1
2 3
4 5 6
ED
ED
ED
ED
Fig. 3: Possible chamber closings (A, C) and vent connections (E) or drain connections (D)
1 Vent connection - Flange with thread G½ or ½ NPT
2 Chamber closing - top (without vent connection)
3 Vent connection - Flange with ange connection
4 Vent connection - Pipe cap welded to thread G½ or ½ NPT
5 Pipe cap welded (without vent connection)
6 Vent connection - Pipe cap welded to ange connection
Note:
Keepinmindfortheplanningthatontoporbottomatleastoneange
connectionisrequiredsothattheoatcanbeinsertedinthemeasur-
ingpipeandalsoremoved.
6
2Mounting
VEGAMAG 81 •
44905-EN-190118
2 Mounting
2.1 Mounting instructions
Thesealsforthevesselconnections(B)andtheventconnection(E)
mustbeprovidedbythecustomer.
Thegasketsforthechamberclosingontop(A),thechamberclosing
atthebottom(C)andthedrainconnection(F)areenclosedtothe
shipment.Youcanndthesealmaterialsinchapter"Technical data".
Beforeuse,checkifthesealmaterialisresistantagainstthemedium,
theprocesspressureandtheprocesstemperature.
ClosealldrainconnectionsbeforethesetupofVEGAMAG81.Check
ifallconnectionsofVEGAMAG81aretight.
Amountedbypasspipemustalsowithstandanypressuretestthat
mightbecarriedoutonthevessel.Keepthepressurespecicationon
thetypelabelinmind.
Caution:
Removetheoatfromthepipebeforeyoustartthepressuretest.
Seals
Close openings
Vessel pressure test
7
3Supplement
VEGAMAG 81 •
44905-EN-190118
3 Supplement
3.1 Technicaldata
Generaldata
Material316Lcorrespondsto1.4404or1.4435
Measurementrequirement Productdensitymustbeknownandconstant
Materials
Ʋ Bypasspipe 316L
Ʋ Float Titanium
Ʋ Magnetgauge-Housing Aluminiumorstainlesssteel
Ʋ Magnetgauge-Displayelements Plasticorstainlesssteel
Colourofthemagnetgauge yellow/blackorred/white
Gasket-Chamberclosings(top/bottom)
Ʋ max.250°C/40bar(482°F/580psig) KlingersilC-4500
Ʋ max.390°C/40bar(734°F/580psig) Graphite
Pipediameter(outer)
Ʋ Version2" ø60.3mm(2.37in)
Wallthickness 2…5.54mm(0.08…0.22in)
Processtemperature max.390°C(734°F)-seeprocesstting,connection
ange(B)
Processpressure
Ʋ Standardversion seeprocesstting-connectionange(B)
Ʋ Accordingtopressuredevicedirective
(PED)
max.90bar(1305psig)-Cat.III,FluidgroupI
Ʋ AccordingtoASME max.100bar(1450psig)
Chamberclosing-top(A)
Pipecap
FlangefromDN50or2"
Processtting-connectionangetop/bottom(B)
Connections Weldedsocketfrom½",stubendfrom½",threadfrom
½NPT,angesfromDN15or½"
Processpressureinbar(psig)dependingontheprocesstemperature
Pressure-Temperature-Assignment-DINanges
Material316/316L(1.4401)
Pressure
range
100°C 150°C 200°C 250°C 300°C 350°C 390°C
PN 40 40bar 36.3bar 33.7bar 31.8bar 29.7bar 28.5bar 27.4bar
PN 63 63bar 57.3bar 53.1bar 50.1bar 46.8bar 45.0bar 43.2bar
PN 100 100bar 90.9bar 84.2bar 79.5bar 74.2bar 71.4bar 68.5bar
8
3Supplement
VEGAMAG 81 •
44905-EN-190118
Pressure-Temperature-Assignment-ASMEanges
Material316
Temperaturerange Class150 Class300 Class400 Class600 Class900 Class
1500
Class
2500
-29…+38°C 19bar 49.6bar 66.2bar 99.3bar 148.9bar 248.2bar 413.7bar
50°C 18.4bar 48.1bar 64.2bar 96.2bar 144.3bar 240.6bar 400.9bar
100°C 16.2bar 42.2bar 56.3bar 84.4bar 126.6bar 211bar 351.6bar
150°C 14.8bar 38.5bar 51.3bar 77bar 115.5bar 192.5bar 320.8bar
200°C 13.7bar 35.7bar 47.6bar 71.3bar 107bar 178.3bar 297.2bar
250°C 12.1bar 33.4bar 44.5bar 66.8bar 100.1bar 166.9bar 278.1bar
300°C 10.2bar 31.6bar 42.2bar 63.2bar 94.9bar 158.1bar 263.5bar
325°C 9.3bar 30.9bar 41.2bar 61.8bar 92.7bar 154.4bar 257.4bar
350°C 8.4bar 30.3bar 40.4bar 60.7bar 91.0bar 151.6bar 252.7bar
375°C 7.4bar 29.9bar 39.8bar 59.8bar 89.6bar 149.4bar 249bar
390°C 6.5bar 29.4bar 39.3bar 58.9bar 88.3bar 147.2bar 245.3bar
Tab. 2: ASME B16.5-2013
Note: Youwillndacompleteoverviewoftheavailablepro-
cessttingsinthe"congurator"onourhomepageat
www.vega.com/congurator.
Chamberclosing-bottom(C)
Pipecap
FlangefromDN50or2"
Drainconnection(D)
ThreadG½(DIN3852-A),½NPT(ASMEB1.20.1)
ThreadG¾(DIN3852-A),¾NPT(ASMEB1.20.1)
FlangeDINfromDN15
FlangeASMEfrom½"
Ventconnection(E)
ThreadG½(DIN3852-A),½NPT(ASMEB1.20.1)
ThreadG¾(DIN3852-A),¾NPT(ASMEB1.20.1)
FlangeDINfromDN15
FlangeASMEfrom½"
9
3Supplement
VEGAMAG 81 •
44905-EN-190118
3.2 Dimensions
O
X
0 %
100 %
A
M
U
C
E
B
B
D
1
Fig. 4: Magnetic level gauge VEGAMAG 81
1 Magnetic level gauge
A Chamber closing - top
B Vessel connection top/bottom
C Chamber closing - bottom
D Drain connection
E Vent connection (optional)
M Dimensions: pipe center to pipe center, 300 … 4000 mm (11.8 … 157.5 in)
O Dimension: Pipe center to ange surface of the upper chamber closing, 152 mm (6 in)
U Dimension: Pipe center to ange surface of the lower chamber closing (depending on the density of the
medium)
X Dimensions: length from pipe center to connection ange, 150 … 400 mm (5.91 … 15.75 in)
10
Notes
VEGAMAG 81 •
44905-EN-190118
11
Notes
VEGAMAG 81 •
44905-EN-190118
Printing date:
VEGA Grieshaber KG
Am Hohenstein 113
77761 Schiltach
Germany
44905-EN-190118
All statements concerning scope of delivery, application, practical use and operat-
ing conditions of the sensors and processing systems correspond to the information
available at the time of printing.
Subject to change without prior notice
© VEGA Grieshaber KG, Schiltach/Germany 2019
Phone +49 7836 50-0
Fax +49 7836 50-201
E-mail: [email protected]
www.vega.com
/