Grizzly G0624Z Owner's manual

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

(FOR MODELS MANUFACTURED SINCE 08/16) #KB18349 PRINTED IN CHINA

The Model G0624Z is the same machine as the Model G0624, except the Model G0624Z has a bigger

motor (0.7 HP) and includes a new tailstock handwheel, tool post base, and live and spur centers.

Except for the differences noted in this insert, all other content in the Model G0624 owner's manual applies

to this machine.

: To reduce the risk of serious injury, you MUST read and understand this insert—and

the entire Model G0624 manual—BEFORE assembling, installing, or operating this machine!

If you have any further questions about this manual insert or the differences between the Model G0624 and

the Model G0624Z, contact our Technical Support at (570) 546-9663 or email [email protected].

MODEL G0624Z

10" BENCHTOP

WOOD LATHE

MANUAL INSERT

V1.12.16

-2-

Model G0624Z (Mfd. Since 08/16)

The information contained herein is deemed accurate as of 12/8/2016 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 2

Model G0624Z

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0624Z 10" BENCHTOP WOOD LATHE

Product Dimensions:

Weight................................................................................................................................................................ 91 lbs.

Width (side-to-side) x Depth (front-to-back) x Height....................................................................... 34 x 8-3/4 x 15 in.

Footprint (Length x Width)....................................................................................................................... 33 x 8-3/4 in.

Shipping Dimensions:

Type............................................................................................................................................................. Cardboard

Content........................................................................................................................................................... Machine

Weight.............................................................................................................................................................. 104 lbs.

Length x Width x Height....................................................................................................................... 38 x 12 x 18 in.

Must Ship Upright.................................................................................................................................................... No

Electrical:

Power Requirement........................................................................................................... 120V, Single-Phase, 60 Hz

Full-Load Current Rating.......................................................................................................................................... 8A

Minimum Circuit Size.............................................................................................................................................. 15A

Connection Type....................................................................................................................................... Cord & Plug

Power Cord Included.............................................................................................................................................. Yes

Power Cord Length................................................................................................................................................. 6 ft.

Power Cord Gauge......................................................................................................................................... 18 AWG

Plug Included.......................................................................................................................................................... Yes

Switch Type.................................................................................................. Paddle Safety Switch w/Removable Key

Motors:

Main

Type........................................................................................................................................... TEFC Induction

Horsepower............................................................................................................................................. 0.7 HP

Amps.............................................................................................................................................................. 8A

Speed................................................................................................................................................ 1725 RPM

Power Transfer .................................................................................................................................. Belt Drive

Bearings..................................................................................................... Shielded & Permanently Lubricated

Main Specifications:

Operation Information

Swing Over Bed......................................................................................................................................... 10 in.

Swing Over Tool Rest Base.................................................................................................................. 7-1/2 in.

Distance Between Centers........................................................................................................................ 15 in.

Max. Distance Tool Rest to Spindle Center........................................................................................... 3-3/4 in.

No of Spindle Speeds....................................................................................................................................... 6

Spindle Speed Range................................................................................................................ 480–4023 RPM

Floor to Center Height....................................................................................................................... 13-3/16 in.

Spindle Information

Spindle Taper............................................................................................................................................ MT#2

Spindle Thread Size............................................................................................................................ 1" x 8 TPI

Spindle Thread Direction.................................................................................................................. Right Hand

Spindle Bore......................................................................................................................................... 23/64 in.

Type of Included Spindle Center................................................................................................................. Spur

Model G0624Z (Mfd. Since 08/16)

-3-

The information contained herein is deemed accurate as of 10/27/2016 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 2 OF 2

Model G0624Z

Tool Rest Information

Tool Rest Width................................................................................................................................... 6-5/16 in.

Tool Rest Post Diameter........................................................................................................................... 5/8 in.

Tool Rest Post Length......................................................................................................................... 2-9/16 in.

Tool Rest Base Height........................................................................................................................... 1-3/8 in.

Tailstock Information

Tailstock Taper.......................................................................................................................................... MT#2

Type of Included Tailstock Center............................................................................................................... Live

Construction

Bed.......................................................................................................................... Precision-Ground Cast Iron

Frame...................................................................................................................................... Cast Iron & Steel

Stand....................................................................................................................................... Cast Iron & Steel

Tailstock.................................................................................................................................. Cast Iron & Steel

Paint Type/Finish.................................................................................................................................... Enamel

Other Related Information

Bed Width............................................................................................................................................ 8-3/16 in.

Faceplate Size............................................................................................................................................. 3 in.

Other Specifications:

Country of Origin ................................................................................................................................................ China

Warranty ....................................................................................................................................................... One Year

Serial Number Location .................................................................................................................................. ID Label

ISO 9001 Factory .................................................................................................................................................. Yes

Accessories Included:

3" Faceplate

Live Rolling Center

Spur Center

Tool Rest

-4-

Model G0624Z (Mfd. Since 08/16)

New Parts

The Model G0624Z MT#2 spur center (see Figure

4) and MT#2 live center (see Figure 5) have

integrated index spindles for improved milling

precision.

The Model G0624Z features a more powerful 0.7-

HP motor (see Figure 1).

Figure 1. Model G0624Z motor (bottom view).

The Model G0624Z features a new tool post base

with a squared-off vertical column, and new lock

handles (see Figure 2).

Figure 2. Tool post base and lock handles.

The Model G0624Z now uses a strain relief to

attach the power cord (see Figure 6).

The new tailstock handwheel is now solid with a

longer handle (see Figure 3).

Figure 3. Tailstock handwheel and tailstock

handwheel handle.

New Old

Figure 4. Comparison of G0624Z MT#2 spur

center (left) and G0624 tapered index spindle

(right).

New

Old

Figure 5. Comparison of MT#2 live centers:

G0624Z (left) and G0624 (right).

New Old

Figure 6. Model G0624Z strain relief and power

cord.

Model G0624Z (Mfd. Since 08/16)

-5-

White

Neutral

Black

Hot

Green

Ground

PADDLE SWITCH

(viewed from behind)

MOTOR

Ground

Run

Capacitor

40MFD

250VAC

The motor wiring shown here is

current at the time of printing, but it

may not match your machine.

Always use the wiring diagram

inside the motor junction box.

110 VAC

5-15 Plug

(As Recommended)

Figure 7. Motor connections. Figure 8. Switch connections.

Wiring Diagram

-6-

Model G0624Z (Mfd. Since 08/16)

Parts Breakdown

57-1

57-2

57-3

57-4

57-5

57-6

68-3

68-1

68-2

68-4

68-5

68-6

Model G0624Z (Mfd. Since 08/16)

-7-

Parts List

REF PART # DESCRIPTION REF PART # DESCRIPTION

1 P0624Z001 SET SCREW M6-1 X 6 54 P0624Z054 PHLP HD SCR M5-.8 X 10

2 P0624Z002 HEADSTOCK HANDWHEEL 83D X 8B-S 55 P0624Z055 FLAT WASHER 5MM

3 P0624Z003 PULLEY SAFETY COVER 56 P0624Z056 WIRE CLAMP

4 P0624Z004 SET SCREW M4-.7 X 6 57 P0624Z057 SWITCH ASSEMBLY

5 P0624Z005 SPINDLE PULLEY 57-1 P0624Z057-1 PHLP HD SCR 10-24 X 1-1/2

6 P0624Z006 BALL BEARING 6004ZZ 57-2 P0624Z057-2 EXT TOOTH WASHER 5MM

7 P0624Z007 HEADSTOCK CASTING 57-3 P0624Z057-3 SWITCH PLATE

8 P0624Z008 BALL BEARING 6005ZZ 57-4 P0624Z057-4 SWITCH BOX

9 P0624Z009 SPINDLE 57-5 P0624Z057-5 HEX NUT 10-24

10 P0624Z010 SPUR CENTER MT#2 57-6 P0624Z057-6 SAFETY PADDLE SWITCH

12 P0624Z012 FACEPLATE 3" 58 P0624Z058 SET SCREW M6-1 X 6

13 P0624Z013 LIVE CENTER MT#2 59 P0624Z059 MOTOR PULLEY

14 P0624Z014 BEDWAY 60 P0624Z060 LOCK NUT M8-1.25

15 P0624Z015 TAILSTOCK QUILL 61 P0624Z061 PHLP HD SCR M6-1 X 16

16 P0624Z016 TAILSTOCK LEADSCREW 62 P0624Z062 MOTOR PLATE

17 P0624Z017 EXT RETAINING RING 15MM 63 P0624Z063 FLAT WASHER 5MM

18 P0624Z018 FLAT WASHER 15MM 64 P0624Z064 CAP SCREW M5-.8 X 15

19 P0624Z019 RUBBER COLLAR 65 P0624Z065 BELT TENSION BRACKET

20 P0624Z020 TAILSTOCK CASTING 66 P0624Z066 SQUARE HEAD BOLT

21 P0624Z021 ECCENTRIC SHAFT 67 P0624Z067 RUBBER SLEEVE

22 P0624Z022 QUILL LOCK HANDLE M6-1 X 13 X 43 68 P0624Z068 MOTOR 0.7HP 120V 1-PH

23 P0624Z023 HEX NUT M4-.7 68-1 P0624Z068-1 CAPACITOR COVER

24 P0624Z024 CAP SCREW M4-.7 X 16 68-2 P0624Z068-2 R CAPACITOR 40M 250V 1.5" X 2.75"

25 P0624Z025 EXT RETAINING RING 10MM 68-3 P0624Z068-3 MOTOR FAN

26 P0624Z026 ROLL PIN 5 X 30 68-4 P0624Z068-4 MOTOR FAN COVER

27 P0624Z027 TAILSTOCK CLAMP BOLT M10-1.5 X 65 68-5 P0624Z068-5 BALL BEARING 6202ZZ (FRONT)

28 P0624Z028 TAILSTOCK LOCK PLATE 68-6 P0624Z068-6 BALL BEARING 6200ZZ (REAR)

29 P0624Z029 LOCK NUT M10-1.5 69 P0624Z069 DUST GUARD

30 P0624Z030 SET SCREW M6-1 X 6 70 P0624Z070 LOCK SCREW 10-24 X 6

31 P0624Z031 HANDWHEEL TYPE-28 80D X 16B-S X M6-1 71 P0624Z071 EXT RETAINING RING 10MM

32 P0624Z032 HANDLE M6-1 X 60 72 P0624Z072 TOOL POST BASE

33 P0624Z033 TAILSTOCK ECCENTRIC SHAFT 73 P0624Z073 TOOL REST LOCK HANDLE M8-1.25 X 20 X 62

34 P0624Z034 EXT RETAINING RING 16MM 74 P0624Z074 TOOL REST CLAMP BOLT M10-1.5 X 51

35 P0624Z035 TAILSTOCK RELEASE LEVER 110 X 13 75 P0624Z075 TOOL REST LOCK PLATE

36 P0624Z036 LEVER KNOB 3/8-16 X 13/16 X 1-5/8 76 P0624Z076 LOCK NUT M10-1.5

37 P0624Z037 KNOCKOUT BAR 77 P0624Z077 TOOL REST

38 P0624Z038 LOCK HANDLE M8-1.25 X 10 X 58 78 P0624Z078 ROLL PIN 4 X 20

39 P0624Z039 GUARD PLATE 79 P0624Z079 EXT RETAINING RING 14MM

40 P0624Z040 V-BELT 3V X 600L RIBBED 80 P0624Z080 TOOL POST ECCENTRIC SHAFT

41 P0624Z041 COMPRESSION SPRING 0.8 X 36L X 24OD 83 P0624Z083 HEX WRENCH 2.5MM

42 P0624Z042 THREADED SHAFT M8-1.25 X 16 X 87 84 P0624Z084 STRAIN RELIEF 5/16" TYPE-1

43 P0624Z043 HEX NUT M8-1.25 85 P0624Z063-1 LOCK WASHER 5MM

44 P0624Z044 CAP SCREW M8-1.25 X 35 87 P0624Z087 MACHINE ID LABEL

45 P0624Z045 THUMB SCREW M5-.8 X 15 88 P0624Z088 FACE SHIELD LABEL

46 P0624Z046 BELT TENSION LOCK KNOB 89 P0624Z089 ENTANGLEMENT HAZARD LABEL

47 P0624Z047 ROLL PIN 3 X 12 90 P0624Z090 READ MANUAL LABEL

48 P0624Z048 BELT TENSION LOCK SHAFT 12 X 93 91 P0624Z091 ELECTRICITY LABEL

49 P0624Z049 SPACER 18MM 92 P0624Z092 TOUCH-UP PAINT, GRIZZLY GREEN

50 P0624Z050 COMPRESSION SPRING 1.5 X 15L X 16OD 93 P0624Z093 GRIZZLY NAMEPLATE

51 P0624Z051 MOTOR PULLEY ACCESS PLATE 94 P0624Z094 DISCONNECT POWER/SPINDLE SPD. LABEL

52 P0624Z052 HEX NUT 3/8-16 95 P0624Z095 POWER CORD 18G 3W 72" 5-15P

53 P0624Z053 RUBBER FOOT 3/8-16 X 1-1/2

-8-

Model G0624Z (Mfd. Since 08/16)

Labels & Cosmetics

Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes

off or becomes unreadable, the owner of this machine MUST replace it in the original location

before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.

REF PART # DESCRIPTION REF PART # DESCRIPTION

87 P0624Z087 MACHINE ID LABEL 91 P0624Z091 ELECTRICITY LABEL

88 P0624Z088 FACE SHIELD LABEL 92 P0624Z092 TOUCH-UP PAINT, GRIZZLY GREEN

89 P0624Z089 ENTANGLEMENT HAZARD LABEL 93 P0624Z093 GRIZZLY NAMEPLATE

90 P0624Z090 READ MANUAL LABEL 94 P0624Z094 DISCONNECT POWER/SPINDLE SPD. LABEL

The following changes were recently made to this machine since the owner's manual was printed:

 

 



  

IMPORTANT: Keep this update with the

owner's manual for future reference.

For questions or help, contact our Tech Support at (570) 546-9663 or [email protected].

Changed Specifications

Electrical



Motor







WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.



Model G0624

***IMPORTANT UPDATE***

For Machines Mfg. Since August, 2012

and Owner's Manual Printed November, 2006

READ THIS FIRST

+-"(

+-"&

+-"'

+-")

+-"*

+-"+

-,K'

New/Revised G0624 Parts

REF PART # DESCRIPTION

68 P0624068 MOTOR 1/2HP 120V 1-PH

68-1 P0624068-1 CAPACITOR COVER

68-2 P0624068-2 R CAPACITOR 25M 250V

68-3 P0624068-3 MOTOR FAN

68-4 P0624068-4 MOTOR FAN COVER

68-5 P6202ZZ BALL BEARING 6202ZZ

68-6 P6200ZZ BALL BEARING 6200ZZ

87V2 P0624087V2 MACHINE ID LABEL CSA V2.08.12

95 P0624095 POWER CORD 18G 3W 72" 5-15P





ELECTRICAL EQUIPMENT INJURY RISKS.



    



      





DISCONNECT POWER FIRST.

 









EYE PROTECTION.



       





OWNER’S MANUAL.  



TRAINED OPERATORS ONLY.

         

    

     

      





DANGEROUS ENVIRONMENTS.   







MENTAL ALERTNESS REQUIRED. 







For Your Own Safety, Read Instruction

Manual Before Operating this Machine

The purpose of safety symbols is to attract your attention to possible hazardous conditions.

This manual uses a series of symbols and signal words intended to convey the level of impor-

tance of the safety messages. The progression of symbols is described below. Remember that

safety messages by themselves do not eliminate danger and are not a substitute for proper

accident prevention measures. Always use common sense and good judgement.

Indicates a potentially hazardous situation which, if not avoided,

MAY result in minor or moderate injury. It may also be used to alert

against unsafe practices.

Indicates a potentially hazardous situation which, if not avoided,

COULD result in death or serious injury.

Indicates an imminently hazardous situation which, if not avoided,

WILL result in death or serious injury.

This symbol is used to alert the user to useful information about

proper operation of the machine.

NOTICE

Safety Instructions for Machinery

SECTION 1: SAFETY







WEARING PROPER APPAREL.   

      

       

  





HAZARDOUS DUST.    

      

    







HEARING PROTECTION.   

      

     





REMOVE ADJUSTING TOOLS.   

    



       



INTENDED USAGE.     



      

       





AWKWARD POSITIONS.   





      



CHILDREN & BYSTANDERS. 





GUARDS & COVERS.

      

      



FORCING MACHINERY.

       



NEVER STAND ON MACHINE.  

         



STABLE MACHINE. 

       





USE RECOMMENDED ACCESSORIES.



    



UNATTENDED OPERATION.   

      OFF 

      

     



MAINTAIN WITH CARE.

     

      

     



CHECK DAMAGED PARTS.  

       





MAINTAIN POWER CORDS. 

     



       







EXPERIENCING DIFFICULTIES.    











Additional Safety for Wood Lathes



INTEGRITY OF STOCK.   

        

      



WORKPIECE PREPARATION.





       



SECURING LOCKS. 

ON

SECURING WORKPIECE.

       

      

     





TOOL SUPPORT.    

       





    





      

       



TOOL KICKBACK.     

     

     

   





ADJUSTMENT TOOLS. 

     

ON      



SAFE CLEARANCES.   





EYE/FACE PROTECTION    



PROPER APPAREL.





SPEED RATES. 

     







NEW SETUPS.







ROUGHING.      





SHARP TOOLS.



        



STOPPING SPINDLE.    

        



ADJUSTMENTS/MAINTENANCE.  

    OFF  





MEASURING WORKPIECE. 

        



SANDING/POLISHING.





MAIN INJURY HAZARDS: Death or crushing injury from getting entangled in rotating spindle

or workpiece; death, blindness, or broken bones from being struck by a workpiece that breaks

apart or comes loose during rotation, turning tool kickback, or flying wood chips. To minimize

your risk of these hazards, always heed the following warning information:

MAIN INJURY HAZARDS: 



              







SECTION 2: POWER SUPPLY

Availability





        





 







Electrocution, fire, or

equipment damage may

occur if machine is not

correctly grounded and

connected to the power

supply.

Full-Load Current Rating

       



       



  



Full-Load Current Rating at 120V ....... 6 Amps













      

   

      





For your own safety and protection of

property, consult an electrician if you are

unsure about wiring practices or electrical

codes in your area.

Note: The circuit requirements listed in this man-

ual apply to a dedicated circuit—where only one

machine will be running at a time. If this machine

will be connected to a shared circuit where mul-

tiple machines will be running at the same time,

consult a qualified electrician to ensure that the

circuit is properly sized for safe operation.

      









        

       















120V Circuit Requirements

   





Nominal Voltage ........................................ 120V

Cycle ..........................................................60 Hz

Phase ........................................... Single-Phase

Power Supply Circuit ......................... 15 Amps

Serious injury could occur if you connect

the machine to power before completing the

setup process. DO NOT connect to power

until instructed later in this manual.





>begdeZgXdccZXi^dcd[i]ZZfj^ebZci"\gdjcY^c\

l^gZ XVc gZhjai ^c V g^h` d[ ZaZXig^X h]dX`# I]Z

l^gZl^i]\gZZc^chjaVi^dcl^i]dgl^i]djinZaadl

hig^eZh^hi]ZZfj^ebZci"\gdjcY^c\l^gZ#>[gZeV^g

dggZeaVXZbZcid[i]ZedlZgXdgYdgeaj\^hcZX"

ZhhVgn!YdcdiXdccZXii]ZZfj^ebZci"\gdjcY^c\

l^gZidVa^kZXjggZciXVggn^c\iZgb^cVa#



8]ZX`l^i]VfjVa^[^ZYZaZXig^X^VcdghZgk^XZeZg"

hdccZa^[ndjYdcdijcYZghiVcYi]ZhZ\gdjcY^c\

gZfj^gZbZcih!dg^[ndjVgZ^cYdjWiVWdjil]Zi]Zg

i]Z idda ^h egdeZgan \gdjcYZY# >[ndj ZkZg cdi^XZ

i]ViV XdgY dg eaj\^hYVbV\ZY dgldgc!Y^hXdc"

cZXi^i[gdbedlZg!VcY^bbZY^ViZangZeaVXZ^il^i]

VcZldcZ#

Extension Cords

LZ Yd cdi gZXdbbZcY jh^c\ Vc ZmiZch^dc XdgY

l^i] i]^h bVX]^cZ#>[ndjbjhi jhZVcZmiZch^dc

XdgY!dcanjhZ^i^[VWhdajiZancZXZhhVgnVcYdcan

dcViZbedgVgnWVh^h#

:miZch^dc XdgYh XVjhZ kdaiV\Z Ygde!l]^X] bVn

YVbV\ZZaZXig^XVaXdbedcZcihVcYh]dgiZcbdidg

a^[Z#KdaiV\ZYgde^cXgZVhZhVhi]ZZmiZch^dcXdgY

h^oZ\Zihadc\ZgVcYi]Z\Vj\Zh^oZ\ZihhbVaaZg

]^\]Zg\Vj\ZcjbWZgh^cY^XViZhbVaaZgh^oZh#

6cnZmiZch^dcXdgYjhZYl^i]i]^hbVX]^cZbjhi

XdciV^c V \gdjcY l^gZ! bViX] i]Z gZfj^gZY eaj\

VcY gZXZeiVXaZ! VcY bZZi i]Z [daadl^c\ gZfj^gZ"

bZcih/

Minimum Gauge Size ...........................14 AWG

Maximum Length (Shorter is Better).......50 ft.

Grounding & Plug Requirements

Figure 1. 

<gdjcY^c\Egdc\

CZjigVa =di

5-15 PLUG

GROUNDED

5-15 RECEPTACLE

SHOCK HAZARD!

Two-prong outlets do not meet the grounding

requirements for this machine. Do not modify

or use an adapter on the plug provided—if

it will not fit the outlet, have a qualified

electrician install the proper outlet with a

verified ground.

I]^h bVX]^cZ BJHI WZ \gdjcYZY# >c i]Z ZkZci

d[XZgiV^cbVa[jcXi^dchdgWgZV`Ydlch!\gdjcY^c\

gZYjXZhi]Zg^h`d[ZaZXig^Xh]dX` Wn egdk^Y^c\ V

eVi]d[aZVhigZh^hiVcXZ[dgZaZXig^XXjggZci#

I]^hbVX]^cZ^hZfj^eeZYl^i]VedlZgXdgYi]Vi

]VhVcZfj^ebZci"\gdjcY^c\l^gZVcYV\gdjcY"

^c\ eaj\ h^b^aVg id i]Z [^\jgZ WZadl# I]Z eaj\

bjhidcanWZ^chZgiZY^cidVbViX]^c\gZXZeiVXaZ

djiaZii]Vi^hegdeZgan^chiVaaZYVcY\gdjcYZY^c

VXXdgYVcXZl^i]VaaadXVaXdYZhVcYdgY^cVcXZh#





PADDLE SWITCH

k^ZlZY[gdbWZ]^cY

<gdjcY

Gjc

8VeVX^idg

'*B;9

'*%K68

GYGY

CZjigVa

=di

<gdjcY

120 VAC

5-15 Plug

120V MOTOR

G0624 Wiring Diagram

Figure 2

Figure 3

Buy Direct and Save with Grizzly

– Trusted, Proven and a Great Value!

~Since 1983~

ORDER

24 HOURS A DAY!

1-800-523-4777

Visit Our Website Today For

Current Specials!

MODEL G0624

10" BENCHTOP LATHE

OWNER'S MANuAL

WARNiNG: NO PORTiON Of THiS MANuAL MAy BE REPRODuCED iN ANy SHAPE

OR fORM WiTHOuT THE WRiTTEN APPROvAL Of GRizzLy iNDuSTRiAL, iNC.

#Bl8683 priNtEd iN ChiNa

Model G0624 shown with optional Model G0625 Bed Extension.







































 

 

 















INTRODUCTION ............................................................................................................................... 2

Foreword .................................................................................................................................... 2

Contact Info ................................................................................................................................

Machine Data Sheet ...................................................................................................................

Identification ............................................................................................................................... 5

SECTION 1: SAFETY .......................................................................................................................

Safety Instructions for Machinery ...............................................................................................

Additional Safety for

Wood Lathes ............................................................................................. 8

SECTION 2: CIRCUIT REQUIREMENTS ........................................................................................

110V Operation ..........................................................................................................................

SECTION 3: SET UP ......................................................................................................................

Set Up Safety ...........................................................................................................................

Items Needed for Setup ........................................................................................................... 10

Unpacking ................................................................................................................................ 10

Inventory ................................................................................................................................... 10

Clean Up ..................................................................................................................................

Site Considerations ..................................................................................................................

Assembly .................................................................................................................................. 12

Test Run ...................................................................................................................................

SECTION 4: OPERATIONS ...........................................................................................................

Operation Safety ......................................................................................................................

Changing Speeds ..................................................................................................................... 13

Adjusting Tailstock ................................................................................................................... 14

Adjusting Tool Rest .................................................................................................................. 14

Installing/Removing Spur Center .............................................................................................

Installing/Removing Live Center .............................................................................................. 15

Installing/Removing Faceplate ................................................................................................. 16

Selecting Turning Tools ...........................................................................................................

Spindle Turning ........................................................................................................................

Faceplate Turning ....................................................................................................................

Sanding/Finishing ..................................................................................................................... 20

SECTION 5: ACCESSORIES ......................................................................................................... 21

SECTION 6: MAINTENANCE ........................................................................................................

Schedule .................................................................................................................................. 23

Cleaning ................................................................................................................................... 23

Unpainted Cast Iron .................................................................................................................

Lubrication ................................................................................................................................ 23

Changing Belt ........................................................................................................................... 23

SECTION 7: SERVICE ...................................................................................................................

Troubleshooting ........................................................................................................................ 24

G0624 Wiring Diagram ............................................................................................................. 26

Parts Breakdown ......................................................................................................................

Parts List ..................................................................................................................................

Warning Labels Parts List ........................................................................................................

WARRANTY AND RETURNS ........................................................................................................

Table of Contents

-2-

G0624 10" Benchtop Lathe

INTRODUCTION

Foreword

We are proud to offer the Model G0624 10"

Benchtop Lathe. This machine is part of a grow

ing Grizzly family of fine woodworking machinery.

When used according to the guidelines set forth in

this manual, you can expect years of trouble-free,

enjoyable operation and proof of Grizzly’s com

mitment to customer satisfaction.

We are pleased to provide this manual with

the Mo

del G0624. It was written to guide you

through assembly, review safety considerations,

and cover general operating procedures. It repre

sents our effort to produce the best documenta

tion possible.

The specifications, drawings, and photographs

illustrated in this manual represent the Model

G0624 as supplied when the manual was pre-

pared. However, owing to Grizzly’s policy of con

tinuous improvement, changes may be made at

any time with no obligation on the part of Grizzly.

For your convenience, we always keep current

Grizzly manuals available on our website at

www.

grizzly.com. Any updates to your machine will be

reflected in these manuals as soon as they are

complete. Visit our site often to check for the lat

est updates to this manual!

If you have any comments regarding this manual,

please write to us at the address below:

Grizzly Industrial, Inc.

/O Technical Documentation Manager

P.O. Box 2069

Bellingham, WA 98227-2069

Email: [email protected]

We stand behind our machines. If you have any

service questions or parts requests, please call or

write us at the location listed below.

Grizzly Industrial, Inc.

1203 Lycoming Mall Circle

Muncy, PA 17756

Phone: (570) 546-9663

Fax: (800) 438-5901

E-Mail: [email protected]

Web Site: http://www.grizzly.com

Contact Info

Page is loading ...

Grizzly G0624Z Owner's manual

Related papers

Other documents