Acnodes PC9070, PC9080, PC9101, PC9120, PC9150, PC9156, PC9170, PC9185, PC9215 User manual

  • Hello! I am an AI chatbot trained to assist you with the Acnodes PC9070 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PC9XX0(A)PC9XXX(A)
All rights reserved. Product description and product specifications are subject to change without notice.
For latest product information, please visit Acnodes’ web site at www.acnodes.com
14628 Central Ave. Chino, CA91710 Tel: 909.597.7588 Fax: 909.597.1939
© Copyright 2015 Acnodes Corp.
User Manual
7” / 8”/ 10.1” / 12.1” / 15” / 15.6” / 17“ / 18.5” / 21.5”
Bay Trail N2930 1.83GHz Fanless Panel PC
Aluminum die-casting & IP65-rated Front Bezel
7” / 8”/ 10.1” / 12.1” / 15” / 15.6” / 17“ / 18.5” / 21.5”
Bay Trail N2930 1.83GHz Fanless Panel PC
Aluminum die-casting & IP65-rated Front Bezel
Embedded Computers
1
Revision History
Reversion
Date
Description
1.0
2015/03/25
Official Version
1.1
2015/07/15
Modify Motherboard Description, add Mounting
Description and BIOS OS Selection on P.67
1.2
2015/10/20
Add UL Certificate, Modify OS Support
2
Warning!________________________
Electric Shock Hazard Do not operate the machine with its back cover removed.
There are dangerous high voltages inside.
This equipment generates, uses and can radiate radio frequency energy and
if not installed and used in accordance with the instructions manual, it may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to FCC Rules, which are
designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own
expense will be required to take whatever measures may be required to correct
the interference.
3
Caution
Risk of explosion if the battery is replaced with an incorrect type.
Batteries should be recycled where possible. Disposal of used batteries must be in
accordance with local environmental regulations.
Disclaimer
This information in this document is subject to change without notice. In no event
shall Acnodes Corporation be liable for damages of any kind, whether incidental or
consequential, arising from either the use or misuse of information in this
document or in any related materials.
4
Packing List
Accessories (as ticked) included in this package are:
Adaptor
Driver & manual CD disc
Other.___________________(please specify)
5
Safety Precautions
Follow the messages below to prevent your systems from damage:
Avoid your system from static electricity on all occasions.
Prevent electric shock. Don‘t touch any components of this card when
the card is power-on. Always disconnect power when the system is not
in use.
Disconnect power when you change any hardware devices. For instance,
when you connect a jumper or install any cards, a surge of power may
damage the electronic components or the whole system.
6
Table of Contents
Revision History…………………………………………………………………………………………………….1
Warning!/Avertissement!......................................................…………………………….…2
Caution/Disclaimer……..………………..................………………………………………………………3
Packing List…………………………………….……………………………………………………………………..4
Safety Precautions...................................…………………………………...……………………..5
Chapter 1 Getting Started
1.1 Features……………………..……………………...…………………………..8
1.2 Specifications…………………...………………………………………………….8
1.3 Dimensions……………………....…………………………………………….11
1.4 Brief Description of PC9XXX(A)......………………………….……17
1.5 Installation of HDD 7/8 ”………..…………...…………………..…..22
1.6 Installation of HDD 10.1/15.6/18.5”………………………………24
1.7 Installation of HDD 12.1/15/17/21.5”………………….……….25
1.8 VESA Mounting…………………………………..………………………………27
1.9 Panel Mounting……………………………………..………………….……….27
Chapter 2 Hardware
2.1 Motherboard Introduction……………………...……………..………....28
2.2 Specifications…………………………..…………………………………………28
2.3 Jumpers and Connectors Location……………………………………...32
2.4 Jumpers Setting and Connectors…………………………………..……33
Chapter 3 BIOS Setup
3.1 Operations after POST Screen…...…….……...…………………………61
3.2 BIOS Setup Utility……………………………………………………………….61
3.3 Main Settings……………………………………..………………………………62
3.4 Advanced Settings……………………………………………………………...63
3.5 Chipset Settings……………………………………….………………………...71
3.6 Security Settings…………………………………………….………………..73
3.7 Boot Settings..………………………………………….……………………..74
3.8 Save & Exit Settings……………………………………..………………....75
Chapter 4 Installation of Drivers
4.1 Intel (R) AtomTM SoC Chipset ………..……...………….………………78
7
4.2 Intel (R) VGA Chipset……………………………………………….……......81
4.3 Intel (R) LAN Driver………..………………………………………..………...85
4.4 Realtek ALC662 HD Audio Driver Installation………………………88
4.5 USB 3.0 Driver…………………………………………………………………….90
Chapter 5 Touch Screen Installation
5.1 Windows XP/2003/Vista/WIN7 Universal Driver Installation for
PenMount 6000 Series...……………….…………………………………...93
5.2 Software Functions…………………………………………………………..103
Figures
Figure 1.1: Dimensions of PC9070 .............……………………..……………......11
Figure 1.2: Dimensions of PC9080..............……………………..………………...11
Figure 1.3: Dimensions of PC9101.............……………………..…………………12
Figure 1.4: Dimensions of PC9120..............……………………..…………………12
Figure 1.5: Dimensions of PC9150A............……………………..…………………13
Figure 1.6: Dimensions of PC9156A(Resistive Touch).........……..……13
Figure 1.7: Dimensions of PC9156A(Projected Capacitive Touch).........14
Figure 1.8: Dimensions of PC9170A............……………………………………….14
Figure 1.9: Dimensions of PC9185A...........……………………………………..15
Figure 1.10: Dimensions of PC9215A(Resistive Touch)…………......……….15
Figure 1.11: Dimensions of PC9215A(Projected Capacitive Touch)......16
Figure 1.12: Front View of PC9XXX(A) Series……………………...……………..17
Figure 1.13: Rear View of PC9070/9080....…………………………………..18
Figure 1.14: Rear View of PC9101.......…………………………………………..18
Figure 1.15: Rear View of PC9120.......…………………………………………..19
Figure 1.16: Rear View of PC9150A.....…………………………………………..19
Figure 1.17: Rear View of PC9156A.....……………………………………...20
Figure 1.18: Rear View of PC9170A.....……………………………………...20
Figure 1.19: Rear View of PC9185A.....…………………………………………..21
Figure 1.20: Rear View of PC9215A.....………………………………………………21
Figure 1.21: PC9XXX(A) Series VESA Mounting…………………………………27
Figure 1.22: PC9XXX(A) Series Panel Mounting………………………………...27
Figure 2.1: Motherboard Dimensions………………………………………….….31
Figure 2.2: Jumpers and Connectors Location-Board Top………………..32
Figure 2.3: Jumpers and Connectors Location-Board Bottom…………..32
8
Chapter 1 Getting Started
1.1 Features
7/8/10.1/12.1/15/15.6”/17”/18.5”/21.5” Industrial Compact Size Panel PC
Flat front panel touch screen
Fanless design
Intel Bay Trail N2930(1.83GHz) CPU built-in
Onboard 4GB DDR 3L 1600 MHz
9~36VDC wide-ranging power input
IP65 compliant front panel
Optional projected capacitive touchscreen support 7H anti-scratch surface
1.2 Specifications
PC9XXX(A) Series
System
Onboard Intel Bay Trail N2930(1.83GHz )
SoC
Onboard 4GB DDR 3L 1600 MHz
IO Port
1 x USB 2.0 type A
1 x USB 3.0 type A
1 x RS-232 DB-9(COM2)
1 x DB-9 RS-232/422/485 (Default RS-232)(COM1)
1 x Audio Line Out
2 x GbE LAN RJ-45
1 x 3-pin DC Power input terminal
1 x 2-pin connector for power on/off button
Option
(Not available
for PC9070 and
PC9080)
2 x RS-232 DB-9 + 1 x Mini-PCIe slot via TB-528C2ME1
2 x CAN bus via TB-528CAN2
2 x USB 2.0 type A Via TB-528U2
2 x USB 2.0 type A + 1 x Mini-PCIe slot + 1xRS-232 DB-9 via TB-528C1U2P1
(TB-528C1U2 for PC9101)
9
Storage Space
1 x SD card slot, up to 32GB
1 x MO-297 SATA SSD bay (Easy Accessible) (for 7”/8”)
1 x 2.5" SATA HDD bay for SATA HDD (Easy Accessible)
Expansion
1 x Internal Mini-PCIe slot full size
Touch Screen Resistive Touch Window Type
PenMount 6000 on Board
USB
Over 80%
Touch Screen Projected Capacitive Type
Chip on tail
USB
Over 90%
Power
9~36V/DC
Mechanical
RAL 9007
IP65 compliant front panel
Environmental
0~50°C
-20~60°C
10 to 90% @ 40°C, non- condensing
CE / FCC Class A / UL
Operating System Support
Windows Embedded Compact 7, Windows Embedded Standard 7, Windows
Embedded 8 Standard, Windows Embedded 8.1 Industry
10
PC9070 PC9080 PC9101 PC9120 PC9150 A
Display
Display Type
7 TFT LCD
8 TFT LCD
10.1 TFT LCD
12.1 TFT LCD
15 TFT LCD
Max. Resolution
800 x 480
800 x 600
1280 x 800
800 x 600
1024 x 768
Max. Color
262K
16.2M
16.2M
16.2M
16.2M
Luminance(cd/m²)
350
350
350
450
300
Contrast Ratio
400 : 1
500 : 1
800 : 1
800 : 1
800 : 1
Viewing angle
140(H)/110(V)
140(H)/125(V)
160(H)/160(V)
160(H)/140(V)
170(H)/170(V)
Backlight Lifetime
40,000 hrs
40,000 hrs
40,000 hrs
50,000 hrs
50,000 hrs
Mounting
VESA Mount 75 x 75
VESA Mount 100 x 100
Dimensions(mm)
202 x 149 x 40
231 x 176 x 50
285 x 189 x 49
319 x 243 x 52
410 x 310 x 55
PC9156A PC9170A PC9185A PC9215A
Display
Display Type
15.6 TFT LCD
17 TFT LCD
18.5 TFT LCD
21.5 TFT LCD
Max. Resolution
1366 x 768
1280 x 1024
1366 x 768
1920 x 1080
Max. Color
16.7M
16.7M
16.7M
16.7M
Luminance (cd/m²)
300
350
300
250
Contrast Ratio
500 : 1
1000 : 1
1000 : 1
3000 : 1
Viewing angle
160 (H)/ 160 (V)
170 (H)/ 160 (V)
170 (H)/ 160 (V)
178 (H)/ 178 (V)
Backlight Lifetime
50,000 hrs
30,000 hrs
50,000 hrs
30,000 hrs
Mounting
VESA Mount 100 x 100
Dimensions(mm)
412 x 277.5 x 60.4
439 x 348 x 64.8
499.6 x 314.6 x 60
557 x 362 x 64.8
11
1.3 Dimensions
Figure 1.1: Dimensions of PC9070
Figure 1.2: Dimensions of PC9080
12
Figure 1.3: Dimensions of PC9101
Figure 1.4: Dimensions of PC9120
13
Figure 1.5: Dimensions of PC9150A
Figure 1.6: Dimensions of PC9156A (Resistive Touch)
14
Figure 1.7: Dimensions of PC9156A (Projected Capacitive Touch)
Figure 1.8: Dimensions of PC9170A
15
Figure 1.9: Dimensions of PC9185A
Figure 1.10: Dimensions of PC9215A (Resistive Touch)
16
Figure 1.11: Dimensions of PC8215A (Projected Capacitive Touch)
17
1.4 Brief Description of PC9XXX(A)
There are 7, 8, 10.1, 12.1, 15, 15.6, 17, 18.5 and 21.5
Industrial Compact Size Panel PC in PC9XXX(A) series, which comes with flat
front panel touch screen and fanless design. It is powered by Intel Bay Trail
N2930(1.83GHz) CPU built-in, 4GB DDR3L 1600 MHz. PC9XXX(A) series is 9~36V
DC wide-ranging power input and IP65 compliant front panel. Optional
projected capacitive touch support 7H anti-scratch surface is ideal for use as PC-
based controller for Industrial Automation & Factory Automation.
Figure 1.12: Front View of PC9XXX(A) Series
18
Figure 1.13: Rear View of PC9170/9180
Figure 1.14: Rear View of PC9101
19
Figure 1.15: Rear View of PC9120
Figure 1.16: Rear View of PC9150A
/