Rolls RP252 User manual

Type
User manual

This manual is also suitable for

Rolls RP252 is a versatile compressor/limiter that can handle a wide range of signals. Its variable threshold, compression ratio, attack, and release controls make it complete for the sound reinforcement or recording need. The noise gate section lowers the output subtly, and the controls make it easy to set for any noise reduction situation. The input and output XLR connectors have -10/+4 dB Level switches.

Some possible use cases for the Rolls RP252 include:

  • Compressing vocals to make them louder and more intelligible
  • Limiting the output of a guitar amplifier to prevent distortion
  • Reducing the noise floor of a recording

Rolls RP252 is a versatile compressor/limiter that can handle a wide range of signals. Its variable threshold, compression ratio, attack, and release controls make it complete for the sound reinforcement or recording need. The noise gate section lowers the output subtly, and the controls make it easy to set for any noise reduction situation. The input and output XLR connectors have -10/+4 dB Level switches.

Some possible use cases for the Rolls RP252 include:

  • Compressing vocals to make them louder and more intelligible
  • Limiting the output of a guitar amplifier to prevent distortion
  • Reducing the noise floor of a recording
RP252 Compressor/Limiter Gate
The RP252 is a professional, full-featured Compressor/Limiter that can
handle a wide range of signals. Variable threshold, compression ratio, attack,
and release controls make the Compressor/Limiter section complete for the
sound reinforcement or recording need. The Noise Gate section lowers the
output subtly, and the controls make it easy to set for any noise reduction
situation. The input and output XLR connectors have -10/+4 dB Level
switches.
FEATURES:
 Versatile Compressor/Limiter
 Ten segment LED gain reduction meter
 Variable Gating with adjustable Threshold and Release Time
 Stereo Linking
 XLR and 1/4" Inputs and Outputs
 Side Chaining for each channel
SPECIFICATIONS
Input Impedance: 10k9 balanced
Max Input Level: +21 dBu
THD: .05% typical
Threshold range: -40dBu to +10dBu
Attack Time: 1 - 10ms.
Release Time: 0.5 - 5 Sec.
Compression Ratio: 1:1 - infinity:1
Gate Threshold: -30 to +4 dB, and Off.
Output Gain: -10 - +20dB
Dimensions: 1.75" x 6" x 19"
(44mm x 152mm 483mm)
ROLLS Coporation
5968 South 350 West, Salt Lake City, UT, 84107
(801) 263-9053 FAX (801) 263-9068
[email protected] • www.rolls.com
THRESHOLD
BYPASS
INPUT
OUTPUT
SIDE CHAIN
IN
SIDE CHAIN
OUT
2
2
Output
Buffer
DETECTOR
GATE THRESHOLD
GATE RELEASE
Gate
Detector
RATIO
ATTACK
RELEASE
VCA
+20 dB
Line/
Inst
STEREO
PWR
COMPRESSOR/LIMITER
GATE
RP252
-40 +10
-30
-24
-12
-6
2:1
:1
9:1
7:1
4:1
10 1 5 .5
2.5
-10 +20
-30
+4
slowoff
fast
THRESHOLD RATIO ATTACK RELEASE LEVEL
GATE THRESH GATE REL
GATEACTIVE
GAIN REDUCTION
124681012182438
GATEACTIVE
GAIN REDUCTION
124681012182438
-18
0
mS
dB dB dB
00
Sec
-40 +10
-30
-24
-12
-6
2:1
:1
9:1
7:1
4:1
10 1 5 .5
2.5
-10 +20
-30
slowoff
fast
THRESHOLD
RATIO
ATTACK RELEASE LEVEL
GATE THRESH GATE REL
-18
0
mS
dB dB dB
00
Sec
+10
+10
+4
120 VAC
50/60 Hz 15 VA
MADE IN U.S.A.
MODEL RP252
SERIAL NUMBER
252-
OUTPUT
CHANNEL 2
SIDE CHAIN
INPUT
INPUT
OUTPUT
RISQUE DE CHOC - NE PAS ENLEVER
OUTPUT
CHANNEL 1
SIDE CHAIN
INPUT
INST
LINE
INST
LINE
INPUT
OUTPUT
C US
WARNING:
To reduce the
risk of electric shock or fire,
do not expose this device to
rain or moisture.
:
CAUTION:
To reduce the risk
of electric shock do not remove
lid. No user serviceable parts
inside. Refer servicing to
qualified service personnel.
  • Page 1 1

Rolls RP252 User manual

Type
User manual
This manual is also suitable for

Rolls RP252 is a versatile compressor/limiter that can handle a wide range of signals. Its variable threshold, compression ratio, attack, and release controls make it complete for the sound reinforcement or recording need. The noise gate section lowers the output subtly, and the controls make it easy to set for any noise reduction situation. The input and output XLR connectors have -10/+4 dB Level switches.

Some possible use cases for the Rolls RP252 include:

  • Compressing vocals to make them louder and more intelligible
  • Limiting the output of a guitar amplifier to prevent distortion
  • Reducing the noise floor of a recording

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI