Zanussi ZR304CTN User manual

Category
Fridges
Type
User manual
FRIGORIFERO-
CONGELATORE
FRIDGE-FREEZER
KÜHL- UND
GEFRIERSCHRANK
REFRIGERATEUR-
CONGELATEUR
ZR 304 CTN
LIBRETTO ISTRUZIONI INSTRUCTION BOOKLET GEBRAUCHSANWEISUNG MODE D’EMPLOI
2222 239-28
10
CONTENTS
Warnings ................................page 11
Installation ................................page 12
Location ................................page 12
Electrical connection ............................page 12
Cleaning the interior ............................page 12
Door reversibility .............................page 12
Building in ...............................page 12
Installation of the appliance in a fitted kitchen unit .................page 13
Instructions to assemble the refrigerator door to the kitchen unit door ..........page 14
Inner door reversal ............................page 14
Use ..................................page 15
Operation - Temperature regulation.......................page 15
Storage of foods in refrigerator compartment ...................page 15
Movable shelves .............................page 15
Positioning the door shelves .........................page 16
Freezing of fresh food and storage of frozen food ..................page 16
Freezing of fresh food ...........................page 16
Storage of commercially frozen food.......................page 16
Thawing ................................page 17
Ice-cube production ............................page 17
Freezer compartment defrosting........................page 17
Refrigerator defrosting ...........................page 17
Maintenance ...............................page 18
Interior cleaning .............................page 18
Idle periods ...............................page 18
Replacing the interior light bulb ........................page 18
Something not working ............................page 18
Printed on recycled paper
11
WARNINGS
It is most important that this instruction book should be
retained with the appliance for future reference. Should the
appliance be sold or transferred to another owner, or should
you move house and leave the appliance, always ensure that the
book is supplied with the appliance in order that the new owner
can be acquainted with the functioning of the appliance and
the relevant warnings.
These warnings are provided in the interest of safety. You must
read them carefully before installing or using the appliance.
ª This appliance is designed to be operated by
adults. Children should not be allowed to tamper
with the controls or play with the product.
ª Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
ª This product should be serviced by an authorized
Service Centre, and only genuine spare parts
should be used.
ª It is dangerous to alter the specifications or
modify this product in any way.
ª Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
ª The domestic refrigerators and freezers are
designed to be used specifically for the storage of
edible foodstuffs only.
ª Frozen food must not be re-frozen once it has
been thawed out.
ª Manufacturers’ storage recommendations should
be strictly adhered to. Refer to relevant
instructions.
ª There are working parts in this product which
heat up. Always ensure that there is adequate
ventilation as a failure to do this will result in
component failure and possible food loss. See
installation instructions.
ª Parts which heat up should not be exposed.
Wherever possible the back of the product should
be against a wall.
ª Before any cleaning or maintenance work is
carried out, be sure to switch off and unplug the
appliance.
ª If the appliance has been transported
horizontally, it is possible that the oil contained in
the compressor flows in the refrigerant circuit. It
is advisable to wait at least two hours before
connecting the appliance to allow the oil to flow
back in the compressor.
ª The inner lining of the appliance consists of
channels through which the refrigerant passes. If
these should be punctured this would damage the
appliance beyond repair and cause food loss.
DO NOT USE SHARP INSTRUMENTS to
scrape off frost or ice. Frost may be removed by
using the scraper provided. Under no
circumstances should solid ice be forced off the
liner. Solid ice should be allowed to thaw when
defrosting the appliance. See defrost instructions.
ª Do not place carbonated or fizzy drinks in the
freezer as it creates pressure on the container,
which may cause it to explode, resulting in
damage to the appliance.
ª This appliance is heavy. Care should be taken
when moving it.
ª Ice lollies can cause frost burns if consumed
straight from the appliance.
ª Under no circumstances should you attempt to
repair the appliance yourself.
Repairs carried out by inexperienced persons
may cause injury or more serious malfunctioning.
Refer to your local Service Centre, and always
insist on genuine spare parts.
ª This appliance does not contain gasses which could damage
the ozone layer, in either its refrigerant circuit or insulation
materials; it must nevertheless be disposed of in a proper
manner, in accordance with regulations for protection of the
environment.
12
INSTALLATION
If this appliance featuring magnetic door seals is to
replace an older appliance having a spring lock
(latch), be sure to make that spring lock unusable
before you discard the old appliance. This will
prevent it from becoming a death-trap for a child.
Location
The appliance should be installed well away from
sources of heat such as radiators, boilers, direct
sunlight etc.
Best performance is obtained with ambient
temperature between +18°C and +43°C (class T);
+18°C and +38°C (class ST); +16°C and +32°C (class
N); +10°C and +32°C (class SN).
The class of your appliance is shown on its rating plate.
For building-in instructions, see the relevant
section.
Electrical connection
Before you plug the appliance into a mains supply,
make sure that the voltage and frequency shown on
the rating plate correspond to your home supply.
A 6% fluctuation above or below the rated voltage is
admissible.
To adapt the appliance to other voltages, use a
suitable autotransformer.
It is essential that the appliance be connected to an
efficient earth tap.
For this purpose the supply cable plug incorporates
a special earth contact.
If the sockets of your domestic wiring system are
not grounded, have the appliance connected to a
separate ground wire by a qualified electrician in
accordance with the existing safety regulations.
The manufacturer declines to accept any liability should
this safety rule not be observed.
This appliance complies with the following
E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and
subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
Cleaning the interior
Before using the appliance for the first time, wash
the interior and all internal accessories with
lukewarm water and some neutral soap so as to
remove the typical smell of a brand-new product,
then dry thoroughly. Do not use detergents which
will leave an odour or abrasive powders on the
interior, as these will damage the finish.
Door reversibility (Fig. 1)
Before fitting the appliance in the kitchen furniture and
connecting it to the power supply, if necessary, change
the door opening side (from right to left). Proceed as
follows:
1. Place the appliance on its back, putting packing
material between it and the floor to avoid
damaging the appliance cooling pipes.
2. Unscrew the bolts.
3. Assemble the spacers and the bolts on the
opposite side.
Fig. 1
Building in
Recess dimensions
Height 1780 mm
Depth 550 mm
Width 560 mm
To ensure adequate ventilation, allow the clearances
shown in Fig. 2.
Fig. 2
D581
D027
50-min. cm
2
200
min.
cm
2
200
13
Installation of the appliance in a fitted kitchen
unit
(Fig. 3)
ª Drill the unit using a Ø 2.5 mm drill (10 mm max.
penetration).
ª Fix the square fitting (1) to the appliance and
apply the rubber seal.
ª If the door is not already assembled fix the
square fitting (2) to the refrigerator and fitting
(3) to the unit column.
ª Fit the refrigerator into the space recessing it by
48 mm in relation to the unit base (Fig. 4).
ª Fix the refrigerator with the screws (5) to the
upper and lower part of the unit, after having
inserted the fittings (6) under the lower hinges.
ª Fix the square fitting (1) to the unit column and
the square fittings (2-3) to each other, after
inserting the clip (4).
ª Snap the ventilation grid.
ª Insert the hinge cover.
Fig. 3
Fig. 4
28mm
Ø
2,5
D612
18mm
13mm
2
3
4
5
1
5
6
5
48mm
D583
14
Instructions to assemble the refrigerator door to
the kitchen unit door
Position the runners (C) at the top and bottom of
the inside of the kitchen unit as shown in Fig. 5 and
mark the position of the external holes.
After preparing the holes, screw the runners to the
kitchen unit door using 3.5x16 mm screws.
Fig. 5
Open both the appliance door and that of the
kitchen unit to approx. 90°.
Place the little plates over the runners. Hold the
doors of the appliance and the unit together and
mark the holes.
Fig. 6
D135
20mm
C
8mm
PR34
Remove the little plates and make the holes with a
diam. of 3,2 mm. Replace the little plates over the
runners and screw in the screws provided
(3.5x16 mm).
For the alignment of the kitchen unit door, if
necessary, use the clearance size of the slotted
holes.
At the end of the procedure, check that the doors of
the appliance and the kitchen unit open properly.
Fig. 7
Inner door reversal
Using a screwdriver, release bracket (1). Unscrew
the bracket support (2) and fit it on the opposite
side. Remove the door.
Unscrew the door stop (3) and screw it on the
opposite side.
Remove the upper bracket of the door (4) and insert
it on the opposite side.
Turn the door through 180°, refit the door and the
lower bracket.
To ensure correct storage of food, the door is fitted
with a simple spring device which holds it in the
open position until it is properly closed.
Fig. 8
PR35
PR232
1
2
3
180°
4
15
USE
Operation - Temperature regulation
Rotate the thermostat knob clockwise until
reaching the desired position (beyond the «
O» =
stop position); the best position is between 3 and 4.
The temperature is automatically regulated and can
be increased to achieve a higher temperature (less
cold) by rotating the thermostat toward lower
settings or diminished (more cold) rotating the knob
towards higher settings.
However, the exact setting should be chosen
keeping in mind that the temperature inside the
refrigerator depends on:
room temperature;
how often the door is opened;
the quantity of food stored;
location of appliance.
To stop operation, simply turn the thermostat knob
to position «
O».
When the refrigerator is set for the coldest temperatures,
with a high surrounding room temperature, it will
probably be in constant operation, with consequent
frosting of the back wall of the compartment. If this
does occur, the knob should be set to obtain a slightly
higher temperature. In this way the refrigerator
automatically defrosts, with a considerable energy saving.
Storage of foods in refrigerator compartment
To achieve the best results with the refrigerator
compartment, you should follow one or two very
simple rules:
Do not put warm foods or evaporating liquids in the
refrigerator.
Cover or wrap foods (particularly if they have a
strong smell or contain aromatic herbs).
Do not cover the shelves (grids) with paper or
plastic since this blocks circulation of air in the
compartment.
Place the food so as to allow air circulation.
Foods should be positioned inside the refrigerator
compartment as indicated in Figure 9.
1. Cold cuts, cheese, butter, milk
2. Meat and fish
3. Fruit and vegetables.
Fig. 9
Raw meat (of all types) should be stored in plastic
bags. Max. conservation time: 1-2 days.
Cooked foods, cold dishes, etc., should be well covered
and can be placed on any grid.
Fruit and vegetables should be washed before being
stored in the specific drawer.
Bananas, potatoes, onions and garlic, if not packed,
must not be kept in the refrigerator.
Movable shelves
The walls of the refrigerator are equipped with a
series of runners so that the shelves can be
positioned as desired.
Fig. 10
1
2
3
D441
D040
16
Positioning the door shelves
To permit storage of food packages of various sizes,
the door shelves can be adjusted in height.
To make these adjustments proceed as follows:
Gradually pull the shelf in the direction of the
arrows until it comes free, then reposition as
required.
Fig. 11
Fig. 12
Freezing of fresh food and storage of frozen food
The freezer compartment is marked with
which means that the compartment is suitable for
the freezing of fresh food and for the long term
storing of frozen food.
Freezing of fresh food
To freeze fresh food it is not necessary to change the
thermostat knob position from that of normal
functioning.
To help you get the best out of the freezing process,
here are a few hints:
Place the food to be frozen on the glass shelves of
the freezer;
Freeze only good-quality, fresh and well-cleaned
foods.
Split them into small portions to speed up freezing
and avoid having to thaw more food than you
require.
Wrap the foods in foil or polythene film, ensuring
that the wrapping adheres closely to the food and is
D006
D026
well sealed.
It is a good idea to mark the packs with the date on
which freezing started so that you can keep a check
on storage periods.
On the inner freezer door of certain models you will
find schematic drawings of foods and animals
indicating maximum storage time (in months)
possible from the time of freezing.
The foods for freezing should not be placed in
contact with already frozen foods. This would cause
the temperature of already frozen foods to rise.
During the freezing process, do not add further
foods for freezing and do not open the freezer door.
Never put fizzy drinks in the freezer as they might well
burst.
A word of warning about ice lollies: they should not
be eaten straight out of the freezer as this might
cause cold burns.
The maximum amount of food which is freezable in
24 hours is indicated on the rating plate. This is to
be found in the refrigerator compartment on the
bottom left-hand side.
Storage of commercially frozen food
To get the best out of your freezer, you should
ensure that:
the products have been correctly stored by the
retailer;
you do not store products for longer than the time
specified by the food manufacturer;
avoid opening the door too frequently and when you
do open it, leave it open only for as long as is strictly
necessary.
If the freezer has been out of use for some time,
before putting the products in the compartment let
the freezer run for at least two hours with the
thermostat knob on max. cold setting. After this,
reset the freezer for normal storage use.
If there happens to be a power failure during the
conservation of frozen food do not open the freezer door.
If the freezer is completely full and the failure is short
(from 10 to 12 hours), frozen products will not be
affected. Otherwise they should be used up very quickly.
It is in fact important to remember that once the foods
have thawed out, they deteriorate fast and cannot be re-
frozen.
17
Thawing
Deep-frozen or frozen food, prior to being used, can
be thawed in the refrigerator compartment or at
room temperature, depending on the time available
for this operation.
Small pieces may even be cooked still frozen,
directly from the freezer: in this case, cooking will
take longer.
Ice-cube production
This appliance is equipped with one or more trays
for the production of ice-cubes.
Fill these trays with water, then put them in the
freezer compartment.
Do not use metallic instruments to remove the trays
from the freezer.
Freezer compartment defrosting
The air humidity that penetrates inside the
appliance when opening its door, accumulates on the
evaporator and particularly on its upper part, thus
creating a layer of frost. To avoid excessive
formation of frost do not leave the door open more
than necessary.
The formation of a thin layer of frost (as for example
on the front edge of the freezer) does not require
complete defrosting. Eliminate this layer
periodically using a plastic scraper (do not use
knives or sharp objects). If a thick layer has formed
it will be necessary to carry out a complete
defrosting as follows:
1. Take out all the frozen food and wrap it in
newspapers placing it in a container (basin or
paper box, etc.) in a cool place until the cleaning
operations have been completed.
2. Set the thermostat knob on «
O» = stopped.
3. Leave the freezer compartment door open.
4. Do not scrape the ice or frost layer with sharp
objects. Do not use a heat diffuser or spray.
5. Eliminate the water which formed during
defrosting by means of a sponge or cloth.
6. Clean inside using a normal detergent for
domestic use.
7. After cleaning, dry properly inside.
8. After completing the operations, turn the
thermostat knob to 5-6 and leave it on this
setting for 3-4 hours. After this period set the
knob to a normal position (medium).
9. Place the frozen food in the appliance again.
Refrigerator defrosting
Refrigerator defrosting is completely automatic.
The defrost water drains out through a trough into
a special container provided on top of the
compressor which is located at the back of the
appliance, where it evaporates.
Important
We particularly recommend the periodic cleaning of
the defrost water drain. Use the special cleaner
provided already inserted into the discharge hole
(Fig. 13).
Fig. 13
D037
18
MAINTENANCE
Unplug the appliance before carrying out any
maintenance operation.
Interior cleaning
Wash the interior of the appliance and its
accessories with lukewarm water and sodium
bicarbonate (one spoon in 4 litres of water).
Rinse and dry carefully.
Idle periods
During periods when the appliance is not used, you
should remove the plug from the wall socket,
defrost and clean the interior and all accessories.
During the idle period leave the door slightly open,
thus letting air circulate and preventing the
formation of mould and unpleasant smells.
Replacing the interior light bulb
The light inside the refrigerator compartment is
easy to get at through the opening in the light
holder.
If the light does not go on when the door is open,
check that it is screwed into place properly.
If it still does not light up, change the bulb.
The rating is shown on the light bulb cover.
Fig. 14
D025
SOMETHING NOT WORKING
If the appliance is not functioning properly check
that:
the plug is firmly in the wall socket and the mains
power switch is on;
electricity is delivered; and controls are set to the
correct position.
If your appliance is still not working properly after
making the above checks, contact your local dealer
or the nearest service centre.
To obtain fast service, it is essential that when you apply
for it you specify the model & serial number of your
appliance which can be found on the rating plate located
inside the appliance at the bottom on the left hand side.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Zanussi ZR304CTN User manual

Category
Fridges
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI