Digi X2 User manual

Digi
Brand
Digi
Model
X2
Type
User manual

This manual is also suitable for

Quick Start Guide
UART Application Kit
1 Verify kit contents
UART Application Kit Board
This Quick Start Guide
Quick Start Guide
U
ART Application Kit
2 Connect hardware
to development board
Sh
if
t
Shift
3 Download
documentation
To obtain a materials lists and installation
instructions specific to your platform, go to
http://www
.digi.com/support
Open User Manual for installation and use
instructions for the UART Application Kit drivers
and softw
are
4 What’s next?
© 2008 Digi International, Inc.
Digi, Digi International, Inc., and the Digi logo are trademarks or registered trademarks of Digi International, Inc., in the United States and other countries worldwide. All other trademarks are property of their
respective owners.
b
a
From the “Select a Product” drop down box,
select “Application Kits”
Flat ribbon 50-pin cable
Development
Board
Development Peripheral UART
Board Application Header AppKit board
ConnectCore 9P 9360 X33 X1
ConnectCore 9P 9215
X33
X2
ConnectCore 9M 2443 X33 X1
ConnectCore 9C/Wi-9C P16 X1
UAR
T
Application Kit
Board
X1 X2
Connect your Development board to the UART
Application Kit board via the provided flat ribbon 50-pin
cable. Connect one end of the cable to the Peripheral
Application Header in your Development board,
and the
other end in header X1 or X2 of the UART Application Kit
(see table)
  • Page 1 1

Digi X2 User manual

Digi
Brand
Digi
Model
X2
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents