17
Incasea recipeneedstobepreparedthroughvarioussteps,presstheSTARTbuttontogetbacktothe
screenwherethenumberof thestepto bestoredwillbeselected.Conversely,iftherecipehasbeen
completed,pleaseselecttheindicationENDbyusingthe“+”and
“‐”buttons,andthenpressSTART.
TogetoutfromtheSTORERECIPEmenuandgobacktotheinitial screenRECIPEMANAGEMENT,press
START if the storage procedure has been completed, or MENU if you decide to exit earlier, therefore
deletingthestorageprocedure.
MODIFICATIONOFA
PRE‐STOREDRECIPE
Tomodifyapre‐storedrecipe:
PresstheMENUbuttonforatleast3seconds.
By using the “+” and “‐” buttons, let the menu words flowing, till selecting “CHANGE”,and press the
STARTbutton.
Choosethenumberoftherecipetobemodified,byusing
the“+”and“‐”buttons,thenonceselected
pressSTARTtoconfirm,andpassontothelinebelow.
Selectionofthesteptobemodified:byusingthe“+”and“‐”buttons,oncethestephasbeenselected
pleasepressSTARTtoconfirm,andthenpasson
tothesettingmodescreen.
Tosetthenewoperatingspeed:selectthedigitwiththe“+” and “‐” buttons, and possibly the PULSE
function(bypressingthePULSEbutton).OncethewordSPEEDhasbeenselected,choosethenewdigit
with the “+” and “‐” buttons,
then confirm by pressing the START button, and pass on to the
subsequentscreen.
Tosetthenewoperatingtime: select thedigitwiththe“+”and“‐”switches.Onceselectedthe word
TIME, choose the new digit with the “+” and “‐” switches and confirm by pressing
the START switch,
thenpassontothesubsequentscreen.
Tosetthenewoperatingtemperature:choosethedigitwiththe“+”and“ ‐”buttons.Onceselectedthe
new the wor d TEMPERATURE, choose the new digit with the “+” and “‐” buttons, and confirm by
pressingthe
STARTbutton,thenpassontothenextscreen.
Tosetanew accessory,positiononthewordreferredtotheaccessorytobeselectedwiththe“+”and
“‐”buttons,andconfirmbypressingtheSTARTbutton.
To confirm the new set data, select YES with the
“+” and “‐” buttons, and confirm by pressing the
STARTbutton,thenpassontothenextscreen.
Conversely,ifyoudonotwanttoconfirmthenewsetdata,selectNOwiththe“+”and“‐”buttons,and
confirm bypressing the START button to go
back to the screen that enables to repeat any operation
requiredtochangetheparameters.
DELETEOFAPRE‐STOREDRECIPE
Todeleteapre‐storedrecipe,pleaseproceedasfollows:
EntertheRECIPEMANAGEMENTmenubykeepingtheMENUbuttonpressedfor3seconds.
Use the “+” and “‐” buttons to let the menu words flow, then position on DELETE and confirm by
pressingtheSTARTbutton.
Select the numberof the recipe to be deleted by using the “+” and “‐” buttons, then press START to
confirmandpassontothelinebelow.
PositiononYESwiththe“+”and“‐”buttonsandconfirmbypressingtheSTARTbutton.
The display
will show the indication SURE DELETE, then get positioned on YES with the “+” and “‐”
buttonsandgiveconfirmationbypressingtheSTARTbutton.ThenthesubsequentscreenOPERATION
COMPLETEDwillappear.
Conversely,byselectingNOtheprogramwillbeexited.
B.Tostorearecipethrough
thePC,writingeveni ngredients andquantities,ortomodifyordeletearecipe
from the SD card through the PC, download from the SD card the software located in the folder
“CreatorPRO”andinstallitfollowingtheinstructions.