TWO-HANDLE CENTERSET
LAVATORY FAUCET
WITH BRASS TRADITIONAL SPOUT
GENERAL DESCRIPTION:
Durable cast brass construction. 1/4 turn washerless
ceramic disc valve cartridges - reversible for use with either
lever or cross handles. One-half inch male inlet shanks.
50/50 drain body with 1-1/4" (32mm) tailpiece. 2.2
gpm/8.3L/min. maximum flow rate.
PRODUCT FEATURES:
Cast Brass Construction: Durable - Excellent in high use
applications. Ideal for prolonged contact with water. Provides
the finest surface for application of all colors and finishes.
Ceramic Disc Valve Cartridges: Assures a lifetime of
smooth handle operation and drip-free performance.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Exclusive Handle Alignment System: Allows fine
tuning of handle position.
Choice of Finishes: Wide range of durable finishes.
Lifetime Warranty
MODEL NUMBER:
2804.222 Centerset Lavatory
Pop-up drain. 2 sets of handles included (metal levers
and porcelain levers).
2804.224 Centerset Lavatory
Pop-up drain. Metal Lever handles.
89mm
(3-1/2")
41mm
(1-5/8")
107mm
(4-1/4")
2804.224 Shown
SUGGESTED SPECIFICATION:
4" centerset lavatory faucet shall feature cast brass construction. Shall also feature 1/4 turn washerless ceramic disc
valve cartridges that are reversible for use with cross or lever handles. Fitting shall be American Standard Model #
2804.22_.___.
22mm
(7/8") DIA.
FOR GROUND JOINT
OR 1/2" O.D. SLIP
CONNECTION
51mm
(2")
25mm
(1")MAX.
32mm
(1-1/4")HOLE
DIA.
102mm
(4)
TM
Williamsburg
41
TWO-HANDLE CENTERSET
LAVATORY FAUCET
WITH BRASS TRADITIONAL SPOUT
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1M
CSA B 125
NSF 61/Section 9
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
Product
Number
Description
2804.222
Lavatory faucet with pop-up drain. 2 sets of
handles included (metal levers and porcelain levers)
2804.224
Lavatory faucet with pop-up drain.
Metal Lever handles.
Meets the American Disabilities Act Guidelines and
ANSI A117.1 Requirements for the physically
challenged.
N/A = NOT AVAILABLE
Finish Options
Polished
Chrome
P. Chrome
/PVD
Brass
Mix
002
299
PVD
Satin/
Brass
297
PVD
Satin
295
PVD
Satin/
Chrome
Mix
221
PVD
Polished
Brass
099
N/A
N/A
N/AN/A N/A
N/A
TM
Williamsburg
/