SONY
3-758-286-21 (1)
Trin 'tron Color TV
Operating Instructions
KV-27S10
KV-27V10
KV-29RS 10
KV-29V10C
KV-29V10M
KV-32S10
@1994 by Sony Corporation
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK)
NO USER-SERViCEABLE PAR*IS INSIDE
REFER SERVICING 300UALIFIED SERVICE PERSONNEL
This symbol is intended to alert the user to the
presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION
To prevent electric shock, do not use this polarized AC
plug with an extension cord, receptacle or other outlet
unless the blades can be fully inserted to prevent blade
exposure.
Precautions
Safety
• Operate the TV only on 120 V AC (KV-27SlO/27VlO/
29RS10/29 V10M/32S10 ouly).
• Operate the TV on 110-127 V or 220-240 VAC
(KV-29V10C only).
• One blade of the plug is wider than the other for safety
purposes and will fit into the power outlet only one
way. If you are unable to insert the plug fully into the
outlet, contact your dealer.
Should any liquid or solid object fall into the cabinet,
unplug the TV and have it checked by qualified
personnel before operating it any further.
Unplug the TV from the wall outlet if you are not
going to use it for several days or more. To disconnect
the cord, pull it out by the plug. Never pull the cord
itself.
For details concerning safety precautions, see the
supplied leaflet "IMPORTANT SAFEGUARDS."
Installing
• To prevent internal heat build-up, do not block the
ventilation openings.
• Do not install the TV in a hot or humid place, or in a
place subject to excessive dust or mechanical vibration.
CAUTION
When using TV games, computers, and similar
products with your TV, keep the brightness and
contrast functions at low settings. If a fixed (non-
moving) pattern is left on the screen for long periods of
time at a high brightness or contrast setting, the image
can be permanently imprinted onto the screen. These
types of imprints are not covered by your warranty
because they are the result of misuse.
Note on Caption Vision (KV-27S10127V10132S10
only)
This television receiver provides display of television
closed captioning in accordance § with 15.119 of the
FCC rules.
Note to CATV system installer
This reminder is provided to call the CATV system
instaUer's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
Use of this television receiver for other than private
viewing of programs broadcast on UHF or VHF or
transmitted by cable companies for the use of the
general public may require authorization from the
broadcaster/cable company and/or program owner.
II I I
Owner's Record
The model and serial numbers are located at the rear oi
the TV. Record these numbers in the spaces provided
below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No.
Serial No.
4 Welcome!
4 Checking your model number
i i i ii i i
Getting Started
5 Step 1: Hookup
9 Step 2: Setting up the remote commander
9 Step 3: Setting up the TV automatically
(AUTO SET UP)
12 Changing the menu language
Operations
13 Watching the TV
14 Adjusting the picture (VIDEO)
15 Adjusting screen brightness automatically
(LUM1SPONDER)
15 Adjusting the sound (AUDIO)
16 Listening to surround sound (SURROUND)
17 Selecting stereo or bilingual programs (MTS)
17 Setting the speaker switch (SPEAKER)
18 Setting audio out (AUDIO OUT)
19 Customizing the channel number buttons (oH
CAPTION /GUIDE)
20 Setting video labels (VIDEOLABEL)
21 Displaying Caption Vision (CAPTION VISION)
21 Operating video equipment
23 Operating a cable box
Additional Information
24 Troubleshooting
26 Specifications
27 Index
The captions in parentheses indicate menu name_.
3
I hank _ou lor purchasing the Sony Trinitron _ Color
IV. Here are some of the features you will enjoy with
vour TV:
• On-screen menus that let you set the picture quality,
sound, and other settings
• Video input jack(s) that allows you to connect your
VCR to the TV and to enjoy video picture and sound
• Surround system that simulates the sound quality of a
concert hall or movie theater (KV-27V10/29V10C/
29VlOM only)
• Lumisponder that automatically adjusts the brightness
of the screen (KV-27VlO/29VlOC_9V10M only)
The instructions in this manual arc lor six ll_¢)dels listed
below. Before you start reading, check your model
number by looking at the rear of your TV.
The KV-27SlO is the model used for illustration
purposes. Any differences in operation are clearly
indicated in the text, for example, "'KV-27S10 only.'"
Instructions in this manual are based on the remote
commander. You can also use the controls on the TV if
they have the same name as those on the remote
commander.
Feature packages
Model I I I
number I 1 I
KV-29RS10 I ] ]
Kv-agv,0c] P I"
KV-29V10M ! _ ] "
KV-32S10 ['l I
4
(Jetting .StarteO
Connecting an antenna/cable TV system
without a VCR
If your cable company requires you to connect a cable
box, make the connection as follows:
Cable or antenna
Incoming Cable
(Rear of W)
VHF/UHF
Although you can u_c either an indoor antenna or
outdoor antenna with your TV, we recommend you to
connect an outdoor antenna or a cable TV system to get
better picture quality.
How to connect different types of
cables
The illustrations below show the examples of
connecting cable to the TV directly.
A
* VHF only
or
• VHF/UHF
or
• cable
75-ohm coaxial cable
(Rear of TV)
VHF/UHF
B
(Rear of TV)
• VHF only 300-ohm twin lead cabl VHF/UHF
• UHF only
or
• VHF/UHF Antenna connector
Cable box
Cable
IN I
(Rear of TV)
VHF/UHF
i OUT
Cable box
Pay cable TV systems use scrambled or encoded signals
requiring the cable box* in addition to the normal cable
connection.
* The cable box will be supplied by the cable company.
Note
• You cannot watch the signal through AUX connector as a
window picture.
C 75-ohm coaxial cable
• VHF __:=
(Rear of TV)
and __UHF
EAC-66 UIV mixer
• UH F -----_ _ (not supplied)
300-ohm twin lead cable
Notes
• Most VHF/UHF combination antennas have a signal splitter.
Remove the splitter before attaching the appropriate connector.
• If you use the U/V mixer, snow and noise may appear in the
picture when viewing cable TV channels over 37 (W +1).
Getting Started I 5
Connecting an antenna/cable TV system with a VCR
"[o connect your VCR to the TV, first check the model
number of your TV and select the corresponding
connection. For details on connection, see the
instruction manual of your VCR. Before making
connection, disconnect the AC power cords of the
equipment to be connected.
After making these connections, you will be able to do
the following:
° View the playback of video tapes
° Record one TV program while viewing another
program
Without a cable box
(Rear of TV)
Cable
•_ VCR
_'_OUT AUDIO VIDEO
ClIZ]l._ ,N ,,NEI_--_--_
OUT L___
?
VHF/UHF
]
1
VMC-810S/820S
(not supplied)
Note
• To connect a monaural VCR, connect the audio output of the
VCR to AUDIO-L (mono) of VIDEO 1 IN on the TV.
To an S video equipped VCR without a cable box
A_
T-
VIDEO (yellow)
-- AUDIO-L (white)
AUDIO-R (red)
• KV-27V10/29V10C/29V10M/32S10 only
If your VCR has an S video output jack, hook up as
follows and then set S VIDEO to ON on your TV
(page 12). (It is set to ON at the factory.)
Cable
6 IGetting Started
VCR
I [_OUT AUDIO VIDEO SVIDEOI
I
VHF/UHF
YC-15V/30V
(not supplied)
J
RK-74A
(not supplied)
(Rear of TV)
S VIDEO
..... AUDIO-L (white)
AUDIO-R (red)
With a cable box
Cable box
Cable [
VCR
J {_OUT AUDIO VIDEO
LINE
oo,LtLI .. .
I
VHF/UHF
_M
[
v_u_
(Rear ot IV)
l
VMC-810S/820S
(not supplied)
Note
* To connect a monaural VCR, connect the audio output of the
VCR to AUDIO-L (mono) of VIDEO 1 IN on the TV.
To an S video equipped VCR with a cable box
VIDEO (yeltow)
AUDIO-L (white)
AUDIO-R (red)
Cable I
Cable box
VCR
OUT AUDIOVIDEO SVIDEOl
,N LINEI(_)OUT_@@ _)1//
VHF/UHF
YC-15V/30V
(not supplied)
I
RK-74A
(not supplied)
Note
• Video signals are composed of Y (luminance) and C (chroma)
signals.The S connection sends the two signals separately preventing
degradation, and gives better picture quality compared to
conventional connection.
(Rear of TV)
S VIDEO
AUDIO-L (white)
AUDIO-R (red)
Getting Started 7
Connecting a camcorder
• KV-27V10/29V10C/29V10M only
"Ihis connection is convenient for viewing a Lam_.order.
(Front of TV)
-- CHANNEL + ©POWER
I I- I I1
II
'VIDEO 1 \
VMC-810S/820S
(not supplied)
1
AUDIO-R (red)
AUDIO-L (white)
Note
• "Io connect a monaural camcorder, connect the audio output of
the VCR to AUDIO-L (mono) of VIDEO 2 INPUT on the TV.
Connecting an audio system
• KV-27V10/29V10CI29V10M only
When connecting audio equipment, see page 17 and 18
for more information.
(Rear of TV)
I;I;l
to AUDIO OUT-L (white)
to AUDIO OUT-R (red)
RK-74A (not supplied)
I
Set the amplifier's
function to line input.
8
JGetting Started
• K V-27S10/29RS10/32SlO
RM-Y116 remote commander
Insert two size AA (R6)
betteries in correct polarity.
• KV-27V10129V10CI29V10M
RM-Y117 remote commander
Insert a size AA (R6)
battery in correct polarity.
You can set up )_}uJ 1V eabilv by ubing AUIO 5EI UI}
feature. It presets all the receivable channels. To set up
the TV manually, see "Setting cable TV on or off" and
"Presetting channels" (page 11).
If the TV is set to a video input, you cannot execute
AUTO SET UP. Press TV/VIDEO so that a channel
number appears.
(Front of KV-27S10129RS10132S10)
SET UP TV VIDEO
© C_
SET UP VOL+ CH- CH+ POWER
(Front of KV-27V10/29V10C/29V10M)
SET UP TV/VIDEO - VOLUME + -- CHANNEL + OPOWER
I . I I . I
Jill i , ll, ,L
SET UP VOL+ CH- CH+ POWER
_.......? 1
Press POWER to turn the TV on.
Notes
• With normal use, the battery should last for approximately six
months.
• If you do not use the remote commander for an extended
period of time, remove the battery to avoid possible damage
from batter}' leakage.
• Do not handle the remote commander roughly. Do not drop it
step on it or let it get wet.
• Do not place the remote commander in locations where it is in
direct sunlight, near a heater, or where the humidity is high.
OPOWER
2 Press SET UP on the front of the TV.
3
The menu appears.
SET UP
DEMO VOL+]
AUTO SET UP CH+ I
FACTORY CH- 1
PRESET
Press CH +.
-CHANNEL+
AUTO PROGRAM
"AUTO PROGRAM" appears on the screen and the
TV starts scanning and presetting channels
automatically. When all the receivable channels are
stored, "AUTO PROGRAM" disappears and the
lowest numbered channel is displayed. If the TV
receives cable TV channels, CATV is set to ON
automatically.
Getting Started ] 9
I
Nore
,, If more than 90 seconds elapse after you press a button, the
menu will disappear automatically.
DEMO: To browse the main functions.
Press VOL+ in step3. The functions and menus are
displayed one by one.
FACTORY PRESET: To restore the factory settings
when you are confused about the TV settings.
Press CH- in step3. The settings of picture and sound
are restored to the factory setting.
Erasing or adding channels
After AUTO SET UP you can erase unnecessary
channels or add the channels you want. Preset channels
during the day rather than late at night, when some
channels may not be broadcasting.
1
dl+ or v-
OOO
OOO
OOO
°0O
Press MENU.
The main menu appears.
0-9 buttons
--ENTER
_MENU
--RETURN
MENU [_.VIDEO
(_ / AUDIO
/ SET UP
CAPTION VISION
/Use € _ Exit
I,
2 Press A+ or XT-to select SET UP and press
RETURN.
The SET UP menu appears.
RETURN UPP,,ON,o,,,DE
(_ I CH SET UP
/ s VIDEO
)_ / DMENU
k,_/(L [use : _ Exit
10 JGetting Started
3
Press A+ or V- to select CH SET UP and
press RETURN.
The CH SET UP menu appears.
((R) RETURN
CH SET UP
,CABLE : ON
AUTO PROGRAM
CH ERASE/ADD
;:'MENU
Use _ Exit
4 Press z_+ or V- to select CH ERASEIADD and
press RETURN.
The CH ERASE/ADD menu appears,
R) RETURN [CH ERASE/ADD 10[
(_ i'ERASE
,,oo I
want to erase and,
CH
5 Erase and/or add the channel you want:
To erase an unwanted channel
(1) Make sure the cursor (P') is beside ERASE.
(2) Press CH +/- to select the channel you
Selected channel number
CH ERASE/ADD
_ERASE --I
ADD l
:)IVlENU /
Select the channell
Use € _ Exit _ I
(3) press RETURN.
The indication "-" appears beside the channel
number, showing that the channel is erased
from the preset memory.
RETURN
©®®
®@®
To add a channel that you want
(1) Press A+ or V- to select ADD.
(2) Press the 0 - 9 buttons to select the channel you
want to add and press ENTER and,
Selected channel number
CH ERASE/ADD _._
"ERASE _l
ADD /
:)MENU /
Select the channell
Use € _ Exit _ ]
(3) press RETURN.
The indication "+" appears beside the channel
number, showing that the channel is added to
the preset memory.
RETURN
6 To erase and/or add other channels, repeat
step 5.
7 When you finish, press MENU.
MENU
Note
• Ifyou eraseoraddaVHForUHFchannel, thecable TV
channel with the samenumberis alsoerased oradded,and
vice versa.
Setting cable TV on or off
If you have connected the TV to a cable TV system, set
CABLE to ON, the factory setting. If not, set CABLE to
OFF.
You do not have to do this procedure if you execute
AUTO SET UP (page 9). Do this procedure only when
you want to set it manually.
1 Press MENU.
2 Press A+ or V- to move the cursor (1_) to SET
UP and press RETURN.
3
4
Press A+ or V- to move the cursor (I_)
to CH SET UP and press RETURN.
I_UH SET UP
CABLE : ON
AUTO PROGRAM
CH ERASE/ADD
_MENU
se # _i_ Exit
Set CABLE to ON or OFF:
(1) Make sure the cursor (1_) is beside CABLE and
press RETURN.
If the cursor is not beside CABLE, press _+ or
V- to move the cursor and press RETURN.
(2) Press A+ or V- to select ON or OFF and,
(3) press RETURN.
ll SET UP
CABLE : OFF
AUTO PROGRAM
CH ERASE/ADD
::)MENU
se¢_Exit_
5 Press MENU to =eturn to the uriginal screen.
Note
• If CH SET UP menu appears in black, the TV is set toa video
input and you cannot select CABLE. Press TV/VIDEO so that a
channel number appears.
Presetting channels
You can preset TV channels easily by using the AUTO
PROGRAM feature.
You do not have to do this procedure if you execute
AUTO SET UP (page 9). Do this produre only when
you want to set it manually.
1 Press MENU.
2 Press _+ or V- to move the cursor (,)
to SET UP and press RETURN.
3 Press A+ or V- to move the cursor (1_)
to CH SET UP and press RETURN.
CH SET UP
bCABLE : ON
AUTO PROGRAM
CH ERASE / ADD
:)MENU
Use _ [_ Exit
4 Press A+ or V- to move the cursor (1_)
to AUTO PROGRAM and press RETURN.
AUTO PROGRAM
"AUTO PROGRAM" appears on the screen and the
TV starts scanning and presetting channels
automatically. When all the receivable channels are
stored, "AUTO PROGRAM" disappears and the
lowest numbered channel is displayed.
5 Press MENU to return to the original screen.
Note
• If the CH SET UP menu appears in black, the TV is set to a
video input and you cannot select AUTO PROGRAM. Press
TV/VIDEO or TV so that a channel number appears.
Getting Started I 11
Setting S video on or off
• KV-27V10/29V10C/29V10M/32S10 only
You can change the S VIDEO menu to ON or OFF.
1 Press TVNIDEO select VIDEO 1.
2 Press MENU.
3 Press Z_+or V- to move the cursor (1_) to SET
UP and press RETURN.
4 Press _+ or _- to move the cursor (1_)to
S VIDEO and press RETURN.
SET UP
CH CAPT ION/GUIDE
CH SET UP
S VIDEO : ON
;)MENU
Use € _ Exit i_
5 Press A+ or _7- to select ON or OFF and press
RETURN,
I SET UP
CH CAPTION/GUIDE
CH SET UP
_S VIDEO : OFF
::_IENU
Use € _ Exi!
6 Press MENU to return to the original screen.
Notes
• If S VIDEO appears in black, set a video input to VIDEO 1.
• If you set S VIDEO to ON, the TV automatically receive S
video signals whenever a VCR with S video is connected.
• KV-29RSlOI29V10CI29V10M only
If you prefer Spanish to English, you can change the
menu language.
_+ or v-
MENU
RETURN
1
Press MENU.
The main menu appears.
MENU i_VIDEO
I AUDIO
I SET UP
I ENGLISH
Iuse0_ Exi,_
2 Press _+ or XT-to move the cursor (1_) to
ENGLISH and press RETURN.
'R) RETURN
IU VIDEO
AUDIO
SET UP
ENGLISH
se # _ Exit JJ_
3 Press Z_+ or V- to select ESPAI_IOL and press
RETURN.
(R) RETURN I VIDEO
(_ I AUDIO
I AJUSTES
)_ I _ESPANOL
_(L lusar¢_ Sal ir_
4 Press MENU to return to the original screen.
Note
• Certain parts of the ESPANOL menus remain in English.
12 IGetting Started
Uperatlons
I I I III I
Switching quickly between two
channels
MUTING
DISPLAY
VOL
JUMP
f
000
Iooo
POWER
SLEEP
_0-9 buttons
ENTER
1
Press POWER to turn the TV on.
POWER
If "VIDEO" appears on the screen, press the TV/
VIDEO button so that a channel number appears.
2
Select the channel you want:
To select a channel directly
Press the 0 - 9 buttons and then press ENTER.
®®®
®®®
®®®b
The channel can also be selected without pressing
ENTER.
To scan through channels
Press CH %/- until the channel you want appears.
3 Press VOL +/- to adjust the volume.
VOL
Note
• Set the CABLE BOX/TV selector to TV.
(KV-2.1..'10/2_gv10c,/2_9VlOM only)
VOLUME
mllmln_
Press JUMP.
The channel you watched previously appears.
JUMP
Pressing JUMP again switches back the channel.
Muting the sound
Press MUTING.
"MUTING" appears on the screen.
MUTING
To restore the sound, press MUTING again, or press
VOL +.
Displaying on-screen information
Use this feature to check the channel number, channel
caption (if set), and MTS mode (if SAP is selected).
Press DISPLAY.
DISPLAY
To cancel the display, press DISPLAY again.
Setting the Sleep Timer
The TV stays on for the length of time you specify and
then shuts off automatically.
Press SLEEP repeatedly until the time (minutes)
you want appears.
Each time you press SLEEP, the time changes as
follows: 30 _ 60 --_ 90 ---* OFF.
SLEEP
To cancel the Sleep Timer, press SLEEP repeatedly
until "SLEEP OFF" appears, or turn the TV off.
Operations 13
When watching 1 V programs, you can adjust the
quality of the picture to suit your taste.
You can adjust the picture of video input(s) as well.
These settings are stored separately from those for the
TV picture.
RESET
_+ or _-
°90
MENU
RETURN
1 Press MENU.
2 Make sure the cursor (1_) is beside VIDEO
and press RETURN.
RETURN
VuI DEO
P I CTURE lUllllllllll!lllll!Imlllllll
HUE ........ I...............
COLOR IIHIl_llIP,-.,.,....
BR IGHT IIIHIIIIIIt.........
SHARP RIIlllllllf............
:)MENU
se _ _ Exit
3 Select the item you want to adjust.
For example:
(l) To adjust brightness, press A+ or 9- to select
BRIGHT and,
V IDEO
P I CTURE IH!UlIIIIIIlUlmlI!
HUE ..... I.........
COLOR IMIIIIIIIHP.....
BRIGHT BInH!IIIIIII!......
SHARP IILIIHIIII_III.......
:)MENU
Use ,€ _ Exit
(2) press RETURN.
RETURN
BR I GHTNESS
IIHIIIHHIIIIIIIIIII]II!IH_II)..............
4 Adjust the selected item:
(1) Press _+ or V- to adjust the item and,
((R)
BRI GHTNESS
|lllllHJllJNIlfllltl_tiftll!lltllf/Ifll!.,,_
(2) press RETURN.
The new setting appears in the VIDEO menu.
RETURN Iv IDEO
(_ / PICTURE IIIIlllll!llffll!lllllllllltl!ll
/ HUE ............I................
| COLOR _lllllllllllfllt..............
i_BRIGHT lmfllllllll_.........
/ SHARP lllllllllllll_lP...........
/ :_MENU
lUse .= {_ Exit i_
/
For details on each item, see "Description of
adjustable items" below.
5 To adjust other items, repeat steps 3 and 4.
Description of adjustable items
Item Press/",+ to Press 9- to
PICTURE Increase picture Decrease picture
contrast and give contrast and give soft
vivid color color
HUE Make skin tones Make skin tones
become greenish become purplish
COLOR Increase color intensity Decrease color intensity
BRIGHT Bril_hten the picture Darken the picture
SHARP Sharpen the picture Soften the picture
To restore the factory settings
Press RESET while the VIDEO menu is displayed.
All the settings except for PICTURE are restored to the
factory settings.
14 IOperations
• KV-27V10/29V10C/29V10M only
The LUMISPONDER feature adjusts the brightness of
the screen automatically according to the ambient
brightness. The LUMISPONDER function
automatically adjusts the level set by the user in the
VIDEO menu to the standard.
dl+ or V-
o MENU
w RETURN
1 Press MENU.
2 Press A+ or V- to select VIDEO and press
RETURN.
3
4
Press Z_+or V- to select LUMISPONDER and
press RETURN.
IVIDEO
R) RETURN I PICTURE IIImlWl,_
J HUE inllllll,.,--_
J COLOR Imm_----.
)_ I BRIGHT llffilnle,-----
_.)(L I SHARP llllnll_.
I LUIdlSPONDER: OFF
I :;)IdENU
Press _+ or V- to select ON or OFF and press
RETURN.
IVIDEO
(R) RETURN I PICTURE11111t111-,----
I HUE llllllli_-,,--
| COLOR IIlUI_
)_ J BRIGHT mlIII_F,,-,--
_.J(L I SHARP BIBIBI-,,,-,
J='LUMI SPONDER : ON
[ _MENU
You can adjust the quality ot the sound to suit your
taste.
You can adjust the sound of video input(s) as well.
These settings are stored separately from those for the
TV sound.
ix+ or _7-
-- MENU
m RETURN
1
2
3
Press MENU.
Press A+ or V- to select AUDIO and press
RETURN.
0o
(R) RETURN I=,TREBLE IIl,ll,tnH_.........
I BASS ilU,llllllll_........
)_ J BALANCE ....,-IF.....
MTS" MAIN
M.T.,/(L :_ENU
Select the item you want to adjust.
For example:
(1) To adjust bass, press A+ or V- to select BASS
and,
IAuD,o I
_(R) J TREBLE lllmlfl,l_..........
I,BASS m,HH_ .........
J BALANCE ....... + .......
)_ I MTS: MAIN
_,J(L _IVIENU
(2) press RETURN.
RETURN
BASS
IHINIIIHIIHH"HIIHIHltHh_..................
Operations 15
4 Adjust the selected item:
(1) Press Z_+ or V- to adjust the item and,
(R)
BASS
INgL.'_'..
(2) press RETURN.
The new setting appears in the AUDIO menu.
IAUD,O 1
RETURN ] TREBLE mlllllHIllF--.-,,,
I • BASS mill....
I BALANCE----I .....
I MTS: MAIN
:::WlENU
For details on each item, see "Description of
adjustable items" below.
5 To adjust other items, repeat steps 3 and 4
above.
Description of adjustable items
Item Press z_+to Press _7-to
TREBLE Increase the treble Decrease the treble
response response
BASS Increase the bass Decrease the bass
response response
BALANCE Emphasize the right Emphasize the left
speaker's volume speaker's volume
To restore the factory settings
Press RESET while the AUDIO menu is displayed.
N ote
• When SPEAKER (page 17) is OFF and AUDIO OUT (page 18)
is FIXED condition, sound menu appears mid-level setting and
it cannot be adjusted.
• KV-27V10/29V10CI29V10M only
SURROUND feature simulate sound reproduction with
the atmosphere of a movie theater or a concert hall.
Surround sound is only effective for stereo programs.
A+ or _-
<:_2)
MENU
RETURN
1 Press MENU.
2 Press Z_+ or V- to select AUDIO and press
RETURN.
3 Press Z_+ or _7- to select SURROUND and
press RETURN.
IAUDtO
(R) RETURN I TREBLEHIIIII_i,.
I BASS HIIllltlllll....
)_ I BALANCE--_ ....
I SURROUND :OF F
k_(L I MTS: MAIN
I SPEAKER_IVVITCH
I _MENU
4 Press Z_+ or _7- to select ON and press
RETURN.
(R) RETURN
AUDIO
TREBLE _IglIHl_hl_........
BASS mlHUHIIHII_............
BALANCE ...... F........
• SURROUND:ON
MTS: MAIN
SPEAKER SWITCH
::)MENU
16 IOperations
The Multichannel TV Sound (MTS) feature allows you
to enjoy stereo sound or Second Audio Programs (SAP)
at your choice. The initial setting is stereo sound
(MAIN).
zl+ or _7-
°00
MENU
RETURN
1 Press MENU.
2 Press _+ or V- to select AUDIO and press
RETURN.
3
RETURN.
Press _+ or V- to select MTS and press
{_( (_ IAUD,O
R) RETURN I TREBLE IIIIHMIF_
I BASS NIIH#iqltHIIF,,'....,,"._-.
)_ I BALANCE _.-I.._
_T._(L NU
4 Press A+ or _7- to select MAIN, SAP, or
MONO and press RETURN.
(R) RETURN
AUDIO
TREBLE IiImmlF--,....
BASS IilI_H_----,
BALANCE "-"'_-"
O"MTS: SAP
;)MENU
Choose
MAIN
SAP
MONO
To
Listen to stereo sound.
The STEREO indicator on the TV lights up
while a stereo broadcast is received.
Listen to bilingual programs.
The sound of non-SAP programs will be
muted when SAP is selected.
Reduce noise during stereo broadcasts.
Note
• Stereo and SAP sounds are subject to program sources.
• KV-27VlOI29VlOC/29VlOM only
You may switch off the TV speakers when, for
example, you want to listen to the sound through a
stereo system.
A+ or _7-
°QO
C:3
MENU
RETURN
1
2
3
Press MENU.
Press A+ or _7- to select AUDIO and press
RETURN.
Press _+ or V- to select SPEAKER SWITCH
and press RETURN.
(R) RETURN In'SPEAKER : OFF
I AUDIO OUT : VAR
)_ I ::,MENU
M:)(L
IUse €_ Exit
!
4 Make sure the cursor (1_) is beside SPEAKER
and press RETURN.
RETURN
SPEAKER SWITCH I
SPEAKER : ON
AUDIO OUT : VAR
:)MENU
Use € _, Ex t
5 Press A+ or _7- to select ON or OFF and press
RETURN.
[Use € _ Exit _'
Operations 17
• KV-27VlO/29V10C/29V10M only
Audio out is variable or fixed when SPEAKER is set to
ON.
You can select audio out to variable or fixed when
SPEAKER is set to OFF.
ix+ or V-
1 Press MENU.
°0O
MENU
RETURN
2 Press A+ or _7- to select AUDIO and press
RETURN.
3
Press A+ or _- to select SPEAKER SWITCH
and press RETURN.
((R) RETURN
4
press RETURN.
(R)
SPEAKER SWITCH 1
"SPEAKER : OFF
AUDIO OUT : VAR
_MENU
Use € _ Exit
Press _+ or _7- to select AUDIO OUT and
RETURN ] SPEAKER SWITCH ]
(_ I SPEAKER : OFF
| AUDIO OUT : VAR
I _MENU
luse_ ExitI_
5 Press A+ or V- to select VAR or FIXED and
18
press RETURN.
(R) RETURN
s:::::::':::l
="AUDIO OUT : FIXED I
_VlENU I
Use € _ Exit B J
VAR: Sound output varied according to the TV
settings. You can adjust the volume, bass,
treble and balance.
FIXED: Sound output is always fixed to a certain
level.
The volume, bass, treble and balance are
also fixed to the factory settings.
Operations
You can choose up to 12 channels, caption each
channel, and assign a specific channel number button
to each channel. This feature allows you to select your
favorite channels easily by name. For example, you can
name channel 20 "ESPN," and assign the channel
number 4 button to it.
Setting captions to favorite channels
4+ or V-
°0O
MENU
RETURN
1 Press TVNIDEO to select TV mode.
2 Press MENU.
3 Press A+ or V- to select SET UP and press
RETURN.
4 Press _+ or V- to select CH CAPTION/GUIDE
and press RETURN.
(R) RETURN
Cs_ cAPT ION/GUIDE I
_l_:)l_ • ---I
e *_ Exit_ I
5 Press RETURN again.
RETURN CH CAPTION/GUIDE !
®_(_ ---I
®®® .... I
®®® _ I
_®_ I
Select a position,/
Use € _ Exit _ I
6 Press A+ or V- to select a channel guide
number button and press RETURN.
Numbers 0-9 and DISPLAY and ENTER are
available for use as a customized channel number.
Each time you press A+ or V-, the channel numbers
change to red in turns. The channel number button
you select will be the one you press to call up your
favorite channel.
(R) RETURN _H CAPTION/GUIDE I
/$t$ I
7 Press _+ or V- to select the channel that
you want to caption and press RETURN.
(R) RETURN ]CH CAPTION/GUIDE I
I • (_ • 2ol
}_ I®®® .... I
".J('-
IU,e.* _ '=xit _ J
8 Enter the letters (up to four) to caption the
channel:
(1) Press A+ or V- to select the first letter.
Each time you press A+ or V-, the letter changes
as shown below and,
_*'-'_ 1..... 9,--*A*-"B ..... Z*"-_&.,-.-_/*---..,._(blankTspa ce)
(R)
(2) press RETURN.
RETURN
CH CAPTION/GUIDE I
_ (_ 2ol
®®® E---I
®®® _ I
_®_ I
Select the letter,I
Use _ _ Exit _] J
!
(3) Repeat steps (1) and (2) to select the remaining
letters and press RETURN.
RETURN
CH CAPTION/GUIDE [
@ @ @ 201
@ @ @ ESPNi
®®® _ I
_®_ i
Select the letler.I
Use # _ Exit I_ I
I
9 Repeat step 5 to 7 to caption other channels.
To erase a caption
Press RESET after step 5. _
I
Notes .
• Thepositionnumberyoualready selected appearsin yellow.
• If the CH CAPTION/GUIDE menu appears in black, the TV is
set to a video input and you cannot select CH CAPTION/
GUIDE.
Press TV/VIDEO toselect TVmode.
• Ifmore than90 secondselapse afteryou pressabutton,the
menu disappears automatically.
Selecting a captioned channel
buttons to select --
CH GUIDE --
O0
OO
c_O
_ c_
1
Press CH GUIDE.
The CHANNEL GUIDE menu appears showing
channel captions and the corresponding channel
number buttons.
2
CH GUIDE ICHANNELGUIDE l
(_ I@ASC-®O'S-®CNN-/I®ES""®.... ®..../
P.... ®.... ®..../
Ia....®...._....I
Press a channel number button, the
DISPLAY or ENTER button to select the
channel you want.
To cancel the CHANNEL GUIDE menu
Press CH GUIDE again.
Operations 1 9
• KV-27V10/29VlOC/29V10M only
This feature allows you to label each input mode so
that you can easily identify the connected equipment.
For example, you can label VIDEO 1 IN as VHS.
A+ or v-
1 Press MENU.
B MENU
RETURN
2 Press A+ or V- to select SET UP and press
RETURN.
3
4
Press A+ or V- to select VIDEO LABEL and
press RETURN.
(R) RETURN
VIDEO LABEL
bVIDEOI: VIDEO1
VIDEO2:VIDE02
VIDEO3:VIDEO3
:;:_MENU
Use € 6 Exit I_]
Press A+ or V- to select the input mode you
want to label and press RETURN.
(R) RETURN
VIDEO LABEL
VIDE01:VIDEO1
VIDEO2:VIDEO2
VIDEO3:VIDE03
::)MENU
Use € _ Exit _
5
Press A+ or _- to select the label and press
RETURN.
(R) RETURN
VIDEO LABEL
_VIDEOI: VHS
VIDEO2:VIDEO2
VIDEO3:VIDEO3
:;)MENU
.Use t _] Exit_
Each time you press ZX+or _7-, the label changes as
shown below.
VIDEO 1
VIDEO 1 _ S VIDEO .,,--* BETA .*--,, 8 turn ,,,--* VHS *-* LD
VIDEO 2
VIDEO 2 *--.-*BETA ..--* 8 mm ,,---* VHS *-* LD
VIDEO 3
VIDEO 3 "'-* BETA _ 8 mm _ VHS _ LD
f T
6 Repeat steps 4 and 5 to label other input
modes.
Note
• If more than 90 seconds elapse after you press a button, the
menu disappears automatically.
20 I Operations
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI