Safety Vision 70WP4 Owner's manual

Category
Car video systems
Type
Owner's manual

This manual is also suitable for

Safety Vision 70WP4 is a 7-inch digital waterproof LED monitor with a wide range of features that make it ideal for a variety of applications. It is compatible with both NTSC and PAL video signals and has an auto day/night detection feature that automatically adjusts the brightness of the display depending on the ambient light level. The monitor also has multiple display modes, including single, split, triple, PIP, and quad, so you can customize the way you view your video footage.

Safety Vision 70WP4 is a 7-inch digital waterproof LED monitor with a wide range of features that make it ideal for a variety of applications. It is compatible with both NTSC and PAL video signals and has an auto day/night detection feature that automatically adjusts the brightness of the display depending on the ambient light level. The monitor also has multiple display modes, including single, split, triple, PIP, and quad, so you can customize the way you view your video footage.

Design and Specifications are subject to change without notice.
7" DIGITAL WATERPROOF LED MONITOR
Model No.: SV-LED70WP4
OWNER'S MANUAL
PLEASE READ CAREFULLY BEFORE
USING AND KEEP IN A SAFE PLACE.
2
Model No.
Serial No.
SV-LED70WP4
OWNER'S RECORD
r
WARNING
You are cautioned that any changes or modifications which are not expressed
or approved in the manual could void your warranty and cause the equipment
to malfunction.
- Use only DC 10V ~ DC 32V.
- If liquid or dust leaks into the case, turn off power to the unit and
consult an experienced technician before using.
- Do not install the unit in an extremely hot or humid place
(radiator, air duct, etc.) or in a place subject to direct sunlight,
excessive dust,
mechanical vibration or shock.
- If your vehicle has been parked in direct sun light resulting in
a considerable rise in temperature inside the vehicle, allow the unit
to cool off before operating.
- Clean the unit with a slightly damp soft cloth.
Use a mild household detergent.
Never use strong solvents such as thinner or benzene as they
might damage the
finish of the unit.
Safety
Installation
General cleaning information
1
2
3
3
SUGGESTIONS
r
7" DIGITAL WATERPROOF LED MONITOR
4
FEATURES
r
4
PACKAGE CONTENTS
r
Please check that you have the correct contents before using this product.
If any items are missing, please contact your dealer.
"
- Wide 7 Digital LED Panel
- NTSC/PAL Compatibility
- A u t o D A Y / N I G H T D e t e c t i o n
- M u l t i p l e d i s p l a y m o d e s ( S I N G L E , S P L I T , T R I P L E , P I P , Q U A D )
- A d j u s t a b l e S p e e d s w i t c h
- Vandal Resistant
- S u p p o r t s V a r i o u s D i v i d e M o d e
- P a r k i n g D i s t a n c e M a r k e r S e t t i n g A v a i l a b l e
- C a p a c i t i v e T o u c h K e y s
- Supports Multi-Functional Cameras
(Normal, Shutter, Tilt on CAM1 and CAM2)
- W a t e r R e s i s t a n t ( I P 6 8 )
SV-LED70WP4 MONITOR SUN VISOR
POWER CORD SCREW KITS INSTRUCTION
MANUAL
STAND BRACKET
OPTIONAL
(SCREW TYPE)
(RAIL TYPE)
OR
Des ign and S pecif icati on s are s ubj ec t to ch ang e wit hout no tice.
7" DIGITAL WATERPROOF LED MONITOR
Model No.: SV-LED70WP4
OWNER'S MANUAL
PLEA SE READ C AREFU LLY BEFOR E
USIN G AND KEEP I N A SAFE PLAC E.
OPERATIONS
r
POWER
2
SELECT
Touch to turn the monitor on.
Touch to turn the monitor off.
Touch to select CAMERA.
Touch to select the option in SET UP MENU.
Use to enter the Display Menu (short press) and
the Main Menu (long press).
Touch once to enter menu mode.
Touch again to exit from menu mode.
Selectable OSD menu disappears in 7 seconds if no buttons are
pressed.
Touch the MENU button over 2 seconds to go back to the
Main Menu and a submenu.
3
MENU
POWER
SELECT
MENU
UP
DOWN
1
1
2
3
4
5
6
5
Monitor start mode will follow “AUTO POWER SETTING
2
NOTE NOTE
SEL
SEL
SEL
MENU
MENU
OPERATIONS
r
UP DOWN
4 5
While in Menu mode and navigate though
the available menu options.
Touch to adjust Bright, Contrast, Color, Tintand
Volume and other setting values.
DAY/NIGHT SENSOR
6
The brightness of the monitor is adjusted automatically
with the DAY/NIGHT SENSOR according to circumstances.
Automatic Brightness Control
6
TI NT
* menu is displayed in NTSC only.
BRIGHT
CONTRAST
COLOR
TINT
DISPLAY ME NU
30
30
30
30
BRIGHT
CONTRAS T
COLOR
TINT
PAL MODE
NTSC MODE
30
(0~60)
30
(0~60)
30
(0~60)
30
(0~60)
OPERATIONS
r
.
DISPLAY MENU
7
MENU UP / DN
SELECTSELECT SELECTSELECT
DN DN
Option setting
Short Press
(more than 0.5 sec)
UP / DN
SELSEL
MENU
OPERATIONS
r
8
.
SETUP MENU
Press the MENU b utton for over 2 seconds to ente r the MAIN MENU.
Selectable OSD m enu disappears in 7 se conds if no buttons are pressed.
CAMERA SETTING
1
SUBDIVISION MENU can control BRIGHT, CONTRAST and COLOR
for individual channels (CAM1-CAM4, AUX)
N A M E : [ C A M 1 ]
S U B D I V I S I O N M E N U
BRIGHT
CONTRA ST
COLOR
SU BDIVISION MEN U U
30
30
30
option setting option setting
A
selecting shifting shifting shifting
UP / DN UP / DN UP / DN
exit
2
NOTE NOTE
CAM1
CAM2
CAM3
CAM4
AUX
1. CAMERA SETTING
SUBDIVISION MENU
NOR/MIR : [MIRROR;NORMAL]
N A M E : [ C A M 1 ]
SORT:[NORMAL;SHUTTER;
TILT.AT;TILT.MT]
UP/DOWN : [ ]U P ; D O W N
lo ng press
(m ore t han 2 sec)
up / down shifting
A
option setting
UP / DN
SELECTSELECT
SEL
MENU
MENU
SELECTSELECT
SEL
SELECTSELECT
SEL
SELECTSELECT
SEL
MENU
MENU
9
OPERATIONS
r
NOR/MIR : [MIRROR;NORMAL]
UP/DOWN : [UP;DOWN]
NOTE NOTE
2
NOTE NOTE
2
Normal/Mirror image can be switched (CAM1-CAM4, AUX)
Up/Down image can be switched (CAM1-CAM4, AUX)
CAM1,CAM2
NAME : [CAM1]
exitoption setting
A
selecting shifting name setting shifting
UP / DN
UP / DN
UP / DN
2
NOTE NOTE
Can give each camera name.
exitoption setting
A
selecting shifting
CAM1,CAM2
SORT:[NORMAL;SHUTTER;TILT.AT; ] TILT.MT
UP / DN
UP / DN
2
NOTE NOTE
Select camera type between NORMAL, SHUTTER, TILT AUTOMATIC or
Press MENU key two times to display the OSD below.
TILT CONTROL:
Press key for TILT UP.
Press key for TILT DOWN.
TILT MANUAL.
How to control TILT MANUAL:
Select “TILT.MT”Exit MENU.
SELECTSELECT
SEL
SELECTSELECT
SEL
SELECTSELECT
SEL
SELECTSELECT
SEL
SELECTSELECT
SEL
MENU
MENU
MENU
MENU
10
OPERATIONS
r
2
TRIGGER SETTING
TRIGGER1
TRIGGER2
TRIGGER3
TRIGGER4
TRIGGER5
2. TRIGGER SETTING
SOURCE:[CAM1~4;AUX;
SPLIT1~3;SKIP]
DELAY:[0 ~20sec]
MARKER:[ON;OFF]
MARKER SET TING
SOURCE:[CAM1~4;AUX;SPLIT1~3;SKIP]
Trigger1~5
Trigger1~5
Trigger1~5
exitoption setting
A
selecting
Up to 5 triggers can be selected (CAM1-CAM4, AUX, SPLIT1-SPLIT3, and SKIP).
When the trigger is activated, the selected sources image is displayed.
DELAY:[0~20SEC]
Each trigger's delay time is adjustable from 0 sec to 20 sec.
2
NOTE NOTE
If one camera is activated
by an intermittent signal
(for example, from a turn signal)
the delay must be activated to
prevent the picture from flickering.
MARKER:[ON;OFF]
MARKER SETTING
exit
eexxiitt
option setting
option setting
option setting
A
A
selecting
selecting
shifting
shifting
selecting
A
selecting shifting shifting selecting
SOURCE SOURCE
UP / DN
UP / DN
UP / DN
SOURCE SOURCE
UP / DN
SOURCE
UP / DN
exit
WIDTH
LEFT-RIGHT
LEFT-RIGHT
LEFT-RIGHT
UP-DOWN
UP-DOWN
WIDTH
UP-DOWN
SOURCE SOURCE
UP / DN UP / DN UP / DN
ON
SELECTSELECT
SEL
SELECTSELECT
SEL
SELECTSELECT
SEL
SELECTSELECT
SEL
SELECTSELECT
SEL
SELECTSELECT
SEL
SELECTSELECT
SEL
SELECTSELECT
SEL
SELECTSELECT
SEL
MENU
MENU
MENU
MENU
MENU
MENU
MENU
MENU
OPERATIONS
r
11
3
SPLIT SETTING
3. SPLIT SETTING
AUDIO:[CAM1~4;AUX;OFF]
DISPLAY TYPE
SOURCE1~4:[CAM1~4;AUX;OFF]
SP L I T 1
SP L I T 2
SP L I T 3
SOURCE1:[CAM1~4;AUX;OFF]
SOURCE2:[CAM1~4;AUX;OFF]
SOURCE3:[CAM1~4;AUX;OFF]
SOURCE4:[CAM1~4;AUX;OFF]
AUDIO:[CAM1~4;AUX;OFF]
DISPLAY TYPE
SPLIT1~SPLIT3
exitoption setting
A
selecting selectingshifting
UP / DN
SPLIT IMAGE
DISPLAY TYPE
DISPLAY TYPE
QUAD IMAGE
DISPLAY TYPE
TRIPPLE IMAGE
Default settings are as follows: SPLIT1: SPLIT IMAGE, SPLIT2: TRIPLE IMAGE,
and SPLIT3: QUAD IMAGE.
Selected camera can't be selected in other SOURCES.
Audio function is only avaialable on selected channel.
Display type is automatically changed to SPLIT / TRIPLE/ QUAD image
according to the selected number of cameras.
Display type is automatically changed to the first image type in
SPLIT / TRIPLE / QUAD image if the selected number of cameras is changed.
2
NOTE NOTE
2
NOTE NOTE
exitoption setting
A
selecting shifting
UP / DN
UP / DN
SELECTSELECT
SEL
SELECTSELECT
SEL
SELECTSELECT
SEL
SELECTSELECT
SEL
SELECTSELECT
SEL
MENU
MENU
MENU
MENU
OPERATIONS
r
12
UNDER FREQUENCY CH:[CAM1~4;AUX;SPLIT1~3]
OVER FREQUENCY DISPLAY:[ON;OFF]
OVER FREQUENCY CH:[CAM1~4;AUX;SPLIT1~3]
FREQUENCY:[10~1000Hz]
4
SPEED SWITCH
SPEED SWITCH:[ON;OFF]
FREQUENCY:[10~1000Hz]
UNDER FREQUENCY CH:[CAM1~4;
AUX;SPLIT1~3]
OVER FREQUENCY DISPLAY:[ON;OFF]
OVER FREQUENCY CH:[CAM1~4;
AUX;SPLIT1~3]
4. SPEED SWITCH
SPEED SWITCH:[ON;OFF]
EXAMPLE OF SPEED SWITCH FUNCTION:
*The purple wire needs to be connected to the vehicle's tachometer signal and the SPEED SWITCH setting
must be set to ON.
*Adjusted to 67Hz (the most common tachometer signal) the camera selected in the UNDER FREQUENCY CH
field is displayed while the vehicle is traveling 0 to about 20 mph.
*Adjust the FREQUENCY to your vehicle's specific tachometer signal.
*Over 20 mph, the selected camera display Switches off. When speed returns to below 20 mph, the camera
displays again. To display another source when the vehicle is traveling over 20 mph, select ON in
OVER FREQUENCY DISPLAY and select a source in OVER FREQUENCY CH.
*Trigger activation overrides speed switch functionality.
Select ON to activate the speed switch.
Select OFF to deactivate the speed switch.
Select activated frequency 10-1,000Hz
Over 20 mph, the selected camera display Switches off.
When speed returns to below 20 mph, the camera displays again.
To display another source when the vehicle is traveling over 20 mph, select
ON in OVER FREQUENCY DISPLAY and select a source in OVER FREQUENCY CH.
Select ON to display an image when the input frequency is higher than
standard.
Adjust the FREQUENCY to your vehicle's specific tachometer signal.
Press SELECT for a short time to change the frequency by 1Hz.
Press and hold SELECT to change the frequency by 10Hz intervals.
exitoption setting
A
shifting
SOURCE
UP / DN
SELECTSELECT
SEL
MENU
MENU
2
NOTE NOTE1
2
NOTE NOTE
2
NOTE NOTE
2
NOTE NOTE
2
NOTE NOTE
2
NOTE NOTE2
13
SENSITIVITY:[0~60]
NIGHT BRIGHT:[0~60]
SENSOR:[ON;OFF]
SENSITIVITY:[0~60]
NIGHT BRIGHT:[0~60]
5. DAY/NIGHT SETTING
SENSOR:[ON;OFF]
5
DAY/NIGHT SETTING
AUTO SCAN SETTING
6
6. AUTO SCAN SETTING
AUTO SCAN:[ON;OFF]
AUTO SCAN DELAY SETTING
AUTO SCAN:[ON;OFF]
AUTO SCAN DELAY SETTING
exitoption setting option setting
A
shiftingshifting
UP / DN UP / DN
OPERATIONS
r
Select ON to activate Day/Night functionality.
Select OFF to deactivate Day/Night
functionality.
Adjust the sensitivity of the Day/Night function.
Adjust the BRIGHTNESS level.
Each channel is displayed sequentially according to the time entered in
AUTO SCAN DELAY SETTING.
Press the SEC button to maintain the display of a channel.
A channel does not display if AUTO SCAN DELAY TIME is set to "0".
Select ON to activate the Auto Scan
function.
Select OFF to deactivate the Auto Scan
function.
exitoption setting
A
shifting
SOURCE
UP / DN
SELECTSELECT
SEL
MENU
MENU
exitoption setting
A
shifting
SOURCE
UP / DN
SELECTSELECT
SEL
SELECTSELECT
SEL
SELECTSELECT
SEL
MENU
MENU
MENU
MENU
2
NOTE NOTE
2
NOTE NOTE
2
NOTE NOTE
2
NOTE NOTE
2
NOTE NOTE
14
7
ADVANCED MENU
AUTO POWER:
[OFF;ON;AUTO]
FACTORY RESET
7. ADVANCED MENU
AUTO POWER:[OFF;ON;AUTO]
FACTORY RESET
Reset to default settings.
Auto Setting Monitor keeps the last setting in memory:
Monitor will start up “Power-on” mode or “Stand- by”mode according
to its last mode before the ignition key off.
Off Setting Monitor keeps “Stand- by”setting regardless of the last mode
before the ignition key off.
On setting: Monitor will be turned on automatically when ignition key on
regardless of the last mode of the monitor before the ignition key off.
OPERATIONS
r
exitoption setting
option setting
A
A
shifting
shifting
SOURCE
SOURCE
UP / DN
UP / DN
SELECTSELECT
SEL
SELECTSELECT
SEL
MENU
MENU
2
NOTE NOTE
2
NOTE NOTE
INSTALLATION
r
1
2
1-1. STAND BRACKET(SCREW FIXING TYPE)
1-2. STAND BRACKET(RAIL TYPE)
DASH BOARD SCREW MONITOR
SUNVISOR MONITOR
15
SYSTEM CONNECTIONS
r
16
VIDEO INPUT (YELLOW/BNC/FEMALE)
AUDIO (WHITE/RCA/JACK)INPUT
VIDEO OUTPUT (RED/BNC/FEMALE)
535 mm
580 mm
CA1
CA2 CA3 CA4
510 mm
410 mm
310 mm
210 mm
210 mm
210 mm
210 mm
70 mm
40 mm
IP/FEMALE
100 mm
50 mm
2 M
1
#16 RED
#16 BLK #22 YEL #22 BLU
#22 ORG
#22 GRN #22 BRW
#22 WHT
5
3
7
2
6
4
8
No
1
2
3
4
5
6
7
8
TRIGGER 1 (GREEN/AWG No.22)
TRIGGER 2 (WHITE/AWG No.22)
TRIGGER 3 (BLUE )/AWG No.22
TRIGGER 4 (YELLOW )/AWG No.22
TRIGGER 5 (BROWN )/AWG No.22
SPEED PULSE (ORANGE/AWG No.22)
GROUND (BLACK )/AWG No.16
DC10~32V (RED )/AWG No.16
REMARKS
“REAR VIEW”
r
SPECIFICATIONS
17
Power Input
Power Consumption
Video System
Panel
Resolution
Format
Display Mode
Camera input(4CH)
Operating Temp.
Storage Temp.
Vibration
I.P Factor
OSD Control
Dimension
Weight
Supplied accy
DC 10V~32V
Max. 30Watt
NTSC / PAL compatible
7" Digital
16:9 wide
Single/Split/Triple/Pip/Quad
Mini DIN 4P, 1Vp-p 75
-30~ +75 ( -22~ 167)
-40~ +85 ( -40~ 185)
7G
IP 68
Day & Night Sensor
Bright, Contrast, Color, Tint
Mirror/Normal, Day/Night Mode/Scale
*Individual Control per Channel available
194(W) X 125(H) X 32(D) mm
7.6(W) X 4.9(H) X 1.2(D) inch
Approx. 720g
Power Cord (1)
Screw Kit (1)
Stand Bracket (1)
Sun Visor (1)
Instruction Manual (1)
800 (H) X3(RGB) X 480 (V) pixels
Model No.: SV-LED70WP4
THIS SYMBOL MEANS DO NOT DISPOSE OF
AS MUNICIPAL WASTE.
RE-USE OR RECYCLE WHEREVER POSSIBLE.
ELECTRICAL / ELECTRONIC COMPONENTS MAY
CONTAIN SUBSTANCES WHICH ARE HARMFUL TO
THE ENVIRONMENT.
FOR ENVIRONMENTALLY SOUND METHODS OF
DISPOSAL, PLEASE CONTACT YOUR LOCAL
GOVERNMENT AUTHORITY.
18
printed in korea
19
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

Safety Vision 70WP4 Owner's manual

Category
Car video systems
Type
Owner's manual
This manual is also suitable for

Safety Vision 70WP4 is a 7-inch digital waterproof LED monitor with a wide range of features that make it ideal for a variety of applications. It is compatible with both NTSC and PAL video signals and has an auto day/night detection feature that automatically adjusts the brightness of the display depending on the ambient light level. The monitor also has multiple display modes, including single, split, triple, PIP, and quad, so you can customize the way you view your video footage.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI