Sony MHC-RV55 Operating instructions

2-595-611-13(1)

Mini Hi-Fi

Component

System

Operating Instructions

MHC-RV555/RV55

MHC-RV222/RV22

2

GB

To reduce the risk of fire or electric

shock, do not expose this apparatus to

rain or moisture.

To prevent fire, do not cover the ventilation of the

apparatus with news papers, table-cloths, curtains, etc.

And don’t place lighted candles on the apparatus.

To prevent fire or shock hazard, do not place objects

filled with liquids, such as vases, on the apparatus.

This appliance is

classified as a CLASS 1

LASER product. This

marking is located on the

rear exterior.

Don’t throw away the battery with

general house waste, dispose of it

correctly as chemical waste.

ENERGY STAR

®

ENERGY STAR

®

is a U.S.

registered mark. As an E

NERGY

S

TAR

®

partner, Sony Corporation

has determined that this product

meets the E

NERGY STAR

®

guidelines for energy efficiency.

WARNING

Do not install the appliance in a confined space,

such as a bookcase or built-in cabinet.

3

GB

How to use this manual...........................5

Playable discs..........................................5

Getting Started

Hooking up the system............................7

Positioning the speakers........................10

(MHC-RV555/RV55 only)

Setting the clock....................................10

VIDEO CD/CD/MP3 – Play

Loading a disc.......................................11

Playing a disc ........................................11

— Normal Play/Shuffle Play

Playing VIDEO CDs with PBC functions

(Ver. 2.0).........................................14

— PBC Play

Playing repeatedly.................................15

— Repeat Play

Creating your own program..................15

— Program Play

Locating a specific part of a

VIDEO CD .....................................16

— Time Search/Disc Digest

Tuner

Presetting radio stations ........................18

Listening to the radio ............................19

— Preset Tuning

— Manual Tuning

Tape – Play

Loading a tape.......................................21

Playing a tape........................................21

Tape – Recording

Recording your favorite CD tracks on a

tape..................................................22

— CD-TAPE Synchro Recording

Recording on a tape manually...............23

— Manual Recording

Sound Adjustment

Adjusting the sound.............................. 24

Selecting the sound effect..................... 24

Adjusting the graphic equalizer and

storing............................................. 25

Selecting the surround effect ................ 25

Enhancing video game sound............... 25

— Game Sync

Mixing video game sound with other

sound source................................... 26

— Game Mixing

Singing along: Karaoke ........................ 26

Timer

Falling asleep to music ......................... 28

— Sleep Timer

Waking up to music.............................. 28

— Play Timer

Timer recording radio programs........... 29

— Rec Timer

Display

Turning off the display ......................... 30

— Power Saving Mode

Viewing information about the disc in the

display ............................................ 31

Changing the Power illuminator........... 32

Viewing information about the disc in the

on-screen display............................ 32

Optional Components

Hooking up optional components......... 34

Listening to audio from a connected

component ...................................... 35

(MHC-RV555/RV55 only)

Recording on a connected

component ...................................... 36

(MHC-RV555/RV55 only)

Table of Contents

continued

4

GB

Troubleshooting

Problems and remedies ......................... 37

Messages ...............................................40

Additional Information

Precautions............................................ 41

Specifications........................................43

Glossary ................................................ 45

List of button locations and reference

pages ............................................... 46

5

GB

• This manual mainly explains operations using

the remote, but the same operations can also

be performed using the buttons on the unit

having the same or similar names.

• The following symbols are used in this

manual.

You can play back the following discs on this

system. Other discs cannot be played back.

List of playable discs

Discs that this system cannot

play

•CD-ROMs

• CD-Rs/CD-RWs other than those recorded in

the following formats:

– VIDEO CD format

– music CD format

– MP3 format that conforms to ISO9660

1)

Level 1/Level 2 or Joliet

2)

• A disc that has a non-standard shape (e.g.,

card, heart).

• A disc with paper or stickers on it.

• A disc that has the adhesive, cellophane tape,

or a sticker still left on it.

1)

ISO9660 Format

The most common international standard for the

logical format of files and folders on a CD-ROM.

There are several specification levels. In Level 1,

file names must be in the 8.3 format (no more than

eight characters in the name, no more than three

characters in the extension “.MP3”) and in capital

letters. Folder names can be no longer than eight

characters. There can be no more than eight nested

folder levels. Level 2 specifications allow file

names and folder names up to 31 characters long.

Each folder can have up to 8 trees.

For Joliet in the expansion format (file and folder

names can have up to 64 characters) make sure of

the contents of the writing software, etc.

2)

Up to 30 characters can be displayed.

How to use this manual

Symbol Meaning

Functions that can be used with

VIDEO CDs

Functions that can be used with

audio CDs

Functions that can be used with

MP3

Playable discs

Format of discs Disc logo

VIDEO CDs

Audio CDs

CD-R/CD-RW

(audio data/MP3

files)

continued

6

GB

Notes on CD-R and CD-RW

• Some CD-Rs or CD-RWs cannot be played

on this system depending upon the recording

quality or physical condition of the disc, or

the characteristics of the recording device.

Furthermore, the disc will not play if it has not

been correctly finalized. For more

information, see the operating instructions for

the recording device.

• CD-R and CD-RW discs recorded in packet

write format are not supported.

• Discs recorded on CD-R/CD-RW drives may

not be played back because of scratches, dirt,

recording condition or the driver’s

characteristics.

• CD-R and CD-RW discs recorded in multi-

session are not supported.

• The system may be unable to play MP3

format files that do not have the “.MP3”

extension.

• Attempting to play non-MP3 format files that

have the “.MP3” extension may result in noise

or malfunction.

• With formats other than ISO9660 level 1 and

2, folder names or file names may not be

displayed correctly.

• The following discs take a longer time to start

playback.

– a disc recorded with complicated tree

structure.

– a disc to which data can be added (non-

finalized disc).

Note on playback operations

of VIDEO CDs

Some playback operations of VIDEO CDs may

be intentionally set by software producers. Since

this system plays VIDEO CDs according to the

disc contents the software producers designed,

some playback features may not be available.

Also, refer to the instructions supplied with the

VIDEO CDs.

Music discs encoded with

copyright protection

technologies

This product is designed to playback discs that

conform to the Compact Disc (CD) standard.

Recently, various music discs encoded with

copyright protection technologies are marketed

by some record companies. Please be aware that

among those discs, there are some that do not

conform to the CD standard and may not be

playable by this product.

Note on DualDiscs

A DualDisc is a two sided disc product which

mates DVD recorded material on one side with

digital audio material on the other side.

However, since the audio material side does not

conform to the Compact Disc (CD) standard,

playback on this product is not guaranteed.

Getting Started

7

GB

Perform the following procedures 1 to 7 to hook up your system using the supplied cords and

accessories. MHC-RV55 is used for illustration purpose.

1 Connect the front speakers.

Connect the right and left speaker cords to

the SPEAKER (FRONT SPEAKER for

MHC-RV555/RV55) terminals as shown

below.

2 Connect the surround speakers.

(MHC-RV555/RV55 only)

Connect the speaker cords to SURROUND

SPEAKER terminals as shown below.

Getting Started

Hooking up the system

AM loop antenna

Front speaker (right)

Front speaker (left)

FM lead antenna

Surround speaker* (right)

Surround speaker* (left)

*

MHC-RV555/RV55 only

R

L

+

–

Black/Stripe (#)

Red/Solid

(3)

Insert only the stripped portion

Red

Black

+

–

R

L

Black/Stripe (#)

Red/Solid

(3)

Insert only the stripped portion

Blue

Black

continued

8

GB

3 Connect the FM and AM antennas.

Set up the AM loop antenna, then connect

it.

Note

Keep the antennas away from the speaker cords.

4 Connect the video input jack of your TV

to the VIDEO OUT jack with the

supplied video cord.

When using a TV

Turn on the TV and select the video input so you can

view the pictures from this system.

5 For models with a voltage selector, set

VOLTAGE SELECTOR to the local

power line voltage.

Refer to the print on your system’s

VOLTAGE SELECTOR for available

settings.

* Saudi Arabian model: 120 – 127 V

6 Connect the power cord to a wall

outlet.

The demonstration appears in the display.

When you press ?/1, the system turns on

and the demonstration automatically ends.

If the plug does not fit the wall socket,

detach the supplied plug adaptor (only for

models equipped with an adaptor).

Note

Install this system so that the power cord can be

unplugged from the wall socket immediately in the

event of trouble.

7 Set the color system to PAL or NTSC

depending on the color system of your

TV while the power is off.

Use buttons on the unit for the

operation.

Notes

• You cannot set the color system in Power Saving

Mode (page 30).

• When you play back a VIDEO CD recorded in a

different color system from the one you set to the

unit, the picture image may be distorted.

Extend the FM lead antenna horizontally

AM loop antenna

The color system

of your TV

Do this

AUTO

(factory setting)

Press ?/1 while holding

down X. If your TV

automatically changes the

color system according to

the input signal, the system

is set to AUTO.

NTSC Press ?/1 while holding

down M. The system is

set to NTSC.

PAL Press ?/1 while holding

down m. The system is

set to PAL.

Getting Started

9

GB

Inserting two R6 (size AA)

batteries into the remote

Note

If you do not use the remote for a long period of time,

remove the batteries to avoid possible damage from

battery leakage and corrosion.

Tip

With normal use, the batteries should last for about six

months. When the remote no longer operates the

system, replace both batteries with new ones.

Attaching the speaker pads

Attach the supplied speaker pads to the bottom

of the speakers to stabilize the speakers and

prevent them from slipping.

Front speaker (Left (4)/Right (4))

When carrying this system

Perform the following procedure to protect

the CD mechanism. Use buttons on the unit

for the operation.

1 Make sure that all discs are removed

from the system.

2 Hold down CD and then press ?/1 until

“STANDBY” appears.

After a few seconds later, “STANDBY”

disappears and “LOCK” appears.

3 Unplug the power cord.

10

GB

1 Place the front speakers at an angle of

45 degrees from your listening

position.

2 Place the surround speakers.

Position the surround speakers within the

respective gray ranges.

Positioning both surround speakers the

same distance from the listening position is

effective.

Use buttons on the remote for the operation.

1 Press ?/1 to turn on the system.

2 Press CLOCK/TIMER SET.

3 Press . or > repeatedly to set the

hour.

4 Press ENTER.

5 Press . or > repeatedly to set the

minute.

6 Press ENTER.

The clock starts working.

To adjust the clock

1 Press CLOCK/TIMER SET.

2 Press . or > repeatedly to select

“CLOCK SET”, then press ENTER.

3 Do the same procedures as step 3 to 6

above.

Notes

• The clock settings are canceled when you disconnect

the power cord or if a power failure occurs.

• You cannot set the clock in Power Saving Mode

(page 30).

Positioning the speakers

(MHC-RV555/RV55 only)

Front speaker (R)

Surround speaker (L)

Surround speaker (R)

Front speaker (L)

20˚

Setting the clock

VIDEO CD/CD/MP3 – Play

11

GB

Use buttons on the unit for the operation.

1 Press Z.

2 Place a disc with the label side up on

the disc tray.

To insert additional discs, press DISC

SKIP/EX-CHANGE to rotate the disc tray.

3 Press Z again to close the disc tray.

Notes

• Do not use a disc with tape, seals or paste on it as this

may cause malfunction.

• Do not forcibly press the disc tray closed with your

finger, as this may cause malfunction.

This system lets you play VIDEO CDs*, audio

CDs and discs with MP3 audio tracks.

Before playing a VIDEO CD, turn on your TV

and select the video input. Refer to the operating

instructions supplied with your TV if you need

help.

* You can play both VIDEO CDs without PBC

functions (Ver. 1.1) and VIDEO CDs with PBC

functions (Ver. 2.0).

Example: When a disc is loaded

1 Press CD (or FUNCTION repeatedly) to

switch the function to CD.

VIDEO CD/CD/MP3 – Play

Loading a disc

Playing a disc

— Normal Play/Shuffle Play

Track number

Disc presence indicator Playing time

Disc tray number

continued

12

GB

2 Press PLAY MODE repeatedly in stop

mode until the mode you want appears

in the display.

* Depending on VIDEO CDs with PBC functions

(Ver. 2.0), the disc does not change.

3 Press N.

Other operations

1)

For VIDEO CDs, there are may be some

disturbance in the video image.

2)

Only when setting the PBC function to off or when

playing VIDEO CDs without PBC functions

(Ver. 1.1).

3)

For discs with MP3 audio tracks, you cannot search

between multiple tracks.

Also, the time may not be displayed correctly for

some tracks.

Select To play

ALL DISCS*

(Normal Play)

All discs in the disc tray

continuously.

1DISC

(Normal Play)

The tracks on the disc you

have selected in original

order.

ALBM

(Normal Play)

All MP3 audio tracks in the

album on the disc you have

selected in original order.

When playing a non-MP3

disc, Album Play performs

the same operation as 1DISC

Play.

ALL DISCS

SHUF (Shuffle

Play)

The tracks on all discs in

random order.

1DISC SHUF

(Shuffle Play)

The tracks on the disc you

have selected in random

order.

ALBM SHUF

(Shuffle Play)

The MP3 audio tracks in the

album on the disc you have

selected in random order.

When playing a non-MP3

disc, Album Shuffle Play

performs the same operation

as 1DISC SHUF Play.

PGM

(Program Play)

The tracks on the disc in the

order you want them to be

played (see “Creating your

own program” on page 15).

To Do this

Stop play Press x.

Pause Press X

1)

. Press again to resume

play.

Select a track

2)

Press . or > repeatedly (or

turn l L on the unit).

Select an album

of MP3

Press ALBUM + or – repeatedly

after step 2.

Find a point in a

track

3)

(Lock

Search Function)

Press m or M during

playback. At the desired point,

press

N to stop searching and

start playback.

For VIDEO CDs only, each time

you press the button, speed

changes cyclically as follows:

1 (slower than 2)

t 2 (normal)

t 3 (faster than 2)

Select a disc in

stop mode

Press DISC SKIP (or DISC 1 – 3

or DISC SKIP/EX-CHANGE on

the unit).

Switch to CD

function from

other function

Press DISC 1 – 3 on the unit

(Automatic Source Selection).

Exchange other

discs while

playing

Press DISC SKIP/EX-CHANGE

on the unit.

Remove a disc Press Z on the unit.

VIDEO CD/CD/MP3 – Play

13

GB

Notes

• You cannot change the play mode during playback.

• Some time may be needed to start playback of discs

recorded in complex configurations such as many

layers.

• When the disc is inserted, the player reads all the

tracks on that disc. If there are many albums or non-

MP3 audio tracks on the disc, it may take a long time

for play to begin or for the next MP3 audio track to

start play.

• Do not save unnecessary albums or tracks other than

MP3 ones in the disc to be used for MP3 listening.

We recommend that you do not save other types of

tracks or unnecessary albums on a disc that has MP3

audio tracks.

• An album that does not include an MP3 audio track

is skipped.

• Maximum album number: 256 (including root

folder)

• Up to 512 tracks and albums of MP3 on a single disc

can be recognized on this unit.

• MP3 audio tracks are played back in the order that

they are recorded on the disc.

• Depending on the encoding/writing software,

recording device, or the recording media used at the

time an MP3 audio track is recorded, you may

encounter such problems as disabled playback,

sound interruptions, and noise.

Tip

When disc access takes a long time, set “CD POWER

ON” by CD power manage function (page 19).

To play a track by entering the

track number

You can also select the track you want using the

remote during Normal Play.

Press the number button(s).

To enter a track number over 10

1 Press >10.

2 Enter the corresponding digits for the same

number of “–” flashing in the display.

To enter 0, press 10/0.

Example:

To enter track number 30, press >10, then press 3 and

10/0.

Resuming playback from the

point you stopped the disc

— Resume Play

This system memorizes the point where you

stopped the VIDEO CD so you can resume from

that point.

Resume Play is not available for an audio CD

and a disc with MP3 audio tracks.

1 While playing a VIDEO CD, press x to

stop playback.

“RESUME” appears on your TV screen. If

“RESUME” does not appear, Resume Play

is not available.

2 Press N.

The player starts playback from the point

you stopped the VIDEO CD in step 1.

Notes

• You cannot perform Resume Play during Disc

Digest, Shuffle Play or Program Play.

• Depending on where you stopped the VIDEO CD,

the system may resume playback from a different

point.

• Resume play is canceled when:

– you press the number buttons, PLAY MODE, x,

DISC SKIP (DISC SKIP/EX-CHANGE on the

unit) or ./>.

– you disconnect the power cord.

– you turn off the system.

– you open the disc tray.

– you change the function to tuner when “CD

POWER OFF” is selected (page 19).

Tip

To view from the beginning of the VIDEO CD, press

x in stop mode, then press N.

14

GB

You can use PBC* menus on your TV screen to

enjoy the disc’s interactive software. The menu

format and structure may differ depending on

each disc.

* PBC: Playback Control

1 Press CD (or FUNCTION repeatedly) to

switch the function to CD.

2 Press N to start playing a VIDEO CD

with PBC functions (Ver. 2.0).

The PBC menu appears on the TV screen.

3 Press the number button(s) to enter the

item number you want.

4 Continue playback according to the

instructions on the menus to enjoy

interactive playback.

Refer to the operating instructions supplied

with the disc, as the operating procedure

may differ according to the VIDEO CD.

Other operations

To cancel playback with PBC

functions (Ver. 2.0)

1 In stop mode, press . or > to select a

track.

2 Press N.

The “PBC OFF” indicator lights up and

playback starts from the selected track. Still

images, such as the menu screens, will not

be shown.

To return to PBC playback, press x in stop

mode, then press N.

Tips

• When “ ” appears on the TV screen, you have

pressed an invalid button.

• When you press NEXT during menu playback or

while playing moving pictures, the next scene on the

disc appears. Also refer to the instructions supplied

with the disc.

• You can cancel playback with PBC functions

(Ver. 2.0) by pressing any number button in stop

mode. The disc is automatically played in Normal

Play mode.

Playing VIDEO CDs with

PBC functions (Ver. 2.0)

— PBC Play

To Do this

Stop play Press x.

Go to the next

menu page or

scene

Press NEXT.

Go back to the

previous menu

page or scene

Press PREV.

Go back to the

previous menu

Press RETURN O.

Select a menu See “To play a track by entering

the track number” (page 13).

VIDEO CD/CD/MP3 – Play

15

GB

You can play all the tracks or a single track on a

disc repeatedly.

Press REPEAT until “REP” or “REP1”

appears.

REP: For all the tracks on the disc(s) up to five

times.

REP1: For a single track only.

To cancel Repeat Play

Press REPEAT repeatedly until both “REP” and

“REP1” disappear.

Notes

• You cannot select “REP” and “ALL DISCS SHUF”

at the same time.

• When you select “REP1”, that track is repeated

endlessly until “REP1” is canceled.

• You cannot select “REP1” during playback of

VIDEO CDs with PBC functions (Ver. 2.0).

You can make a program of up to 25 steps from

all the discs in the order you want to play them.

You can synchro record the programmed tracks

onto a cassette tape (page 22).

1 Press CD (or FUNCTION repeatedly) to

switch the function to CD.

2 Press PLAY MODE repeatedly in stop

mode until “PGM” appears.

3 Press DISC SKIP (or DISC 1 – 3 or DISC

SKIP/EX-CHANGE on the unit) to select

a disc.

4 Press . or > repeatedly (or turn

l L on the unit) until the desired

track number appears.

When programming the MP3 audio tracks,

press ALBUM + or – to select album, then

press . or > repeatedly (or turn l

L on the unit) until the desired track

number appears.

5 Press ENTER.

The track is programmed.

The program step number appears,

followed by the total playing time.

Playing repeatedly

— Repeat Play

Creating your own

program

—Program Play

Selected track numberDisc tray number

Total playing time (including

selected track)

continued

16

GB

6 Program additional tracks.

7 Press N.

Program Play starts.

Other operations

Tips

• The program you made remains after Program Play

finishes. To play the same program again, press CD

(or FUNCTION repeatedly) to switch the function to

CD, then press N. However, the program is cleared

when you open the disc tray.

• “– –.– –” appears when the total VIDEO CD/CD

program time exceeds 100 minutes, or when you

select a VIDEO CD/CD track whose number is 21 or

over, or when you select an MP3 audio track.

The TV screen must be ON to use these

functions.

Locating by elapsed time from

the beginning of the disc

— Time Search

1 Press SPECIAL MENU in stop mode.

2 Press 1 to select “1) TIME SEARCH”.

3 Press the number buttons to enter the

time (in minutes) for the section you

want.

To enter 10 minutes: Press 1 and 10/0.

The selected elapsed time appears on the

TV screen.

To reenter the time: Press CLEAR and then

press the number buttons again.

4 Press N.

Playback starts from the selected time.

Note

Time Search function is only available for MPEG

motion picture data.

To program Repeat steps

Other tracks on the

same disc

4 and 5

Other tracks on

other discs

3 to 5

To Do this

Cancel Program

Play

Press PLAY MODE repeatedly

in stop mode until “PGM”

disappears.

Clear a track from

the end

Press CLEAR in stop mode.

Locating a specific part of

a VIDEO CD

— Time Search/Disc Digest

VIDEO CD/CD/MP3 – Play

17

GB

Locating the desired track

—Disc Digest

You can select the track you want by viewing

the first frame of each track. 9 different tracks

can be displayed on the TV screen at one time.

1 Press SPECIAL MENU in stop mode.

2 Press 2 to select “2) DISC DIGEST”.

The first frame of tracks 1 through 9 on the

current disc are displayed.

3 Press the number buttons (1 – 9) to

select the track you want.

To display the next 9 tracks

Press >. The first frame of tracks 10 through

18 are displayed.

When there are more tracks in the disc, “>”

appears in the upper right corner of the TV

screen.

To display previous tracks, press ..

Note

If you press SPECIAL MENU to activate Time Search

or Disc Digest in Program or Shuffle Play mode, it

changes to Normal Play mode.

18

GB

You can preset up to 20 FM stations and 10 AM

stations. You can then tune in any of those

stations simply by selecting the corresponding

preset number.

Automatic tuning preset

You can automatically tune in all of the stations

that can be received in your area and then store

the radio frequency of the desired stations.

1 Press TUNER BAND (or FUNCTION

repeatedly) to switch the function to

tuner.

2 Press TUNER BAND repeatedly to

select “FM” or “AM”.

3 Press TUNING MODE repeatedly until

“AUTO” appears in the display.

4 Press + or – (or TUNING + or – on the

unit).

The frequency changes as the system scans

for a station. Scanning stops automatically

when a station is tuned in. At that time,

“TUNED” and “STEREO” (for an FM

stereo program) appear.

If “TUNED” does not appear and the

scanning does not stop

Set the frequency of the desired radio

station as described in steps 3 through 8 of

“Manual tuning preset” (page 18).

5 Press TUNER MEMORY.

A preset number appears.

6 Press + or – (or TUNING + or – on the

unit) repeatedly to select the desired

preset number.

7 Press ENTER.

8 Repeat steps 2 through 7 to store other

stations.

Manual tuning preset

You can manually tune in and store the radio

frequency of the desired stations.

1 Press TUNER BAND (or FUNCTION

repeatedly) to switch the function to

tuner.

2 Press TUNER BAND repeatedly to

select “FM” or “AM”.

3 Press TUNING MODE repeatedly until

“AUTO” and “PRESET” disappear from

the display.

4 Press + or – (or TUNING + or – on the

unit) repeatedly to tune in the desired

station.

5 Press TUNER MEMORY.

A preset number appears.

6 Press + or – (or TUNING + or – on the

unit) repeatedly to select the desired

preset number.

7 Press ENTER.

8 Repeat steps 2 through 7 to store other

stations.

Other operations

Tuner

Presetting radio stations

Preset number

To Do this

Tune in a station

with a weak signal

Follow the procedure described

in “Manual tuning preset”

(page 18).

Set another station

to the existing

preset number

Start over from step 2. After

step 5, press + or – (or TUNING

+ or – on the unit) repeatedly to

select the preset number you

want to store the other station.

Tuner

19

GB

To improve tuner reception

When tuner reception is poor, set CD player

power off by CD power manage function.

Use buttons on the unit for the operation.

1 Press CD.

2 Press ?/1 to turn off the system.

3 Press ?/1 while holding x.

“CD POWER OFF” appears.

To set CD power on

Repeat the procedure above and “CD POWER

ON” appears.

Notes

• When “CD POWER OFF” is selected, disc access

time is increased.

• You cannot change the setting in Power Saving

Mode (page 30).

To change the AM tuning interval

(except for Saudi Arabian model)

The AM tuning interval is factory-preset to

9 kHz (or 10 kHz for some areas). To change the

AM tuning interval, tune in any AM station first,

then turn off the system. While holding

TUNING MODE on the unit, press ?/1 on the

unit. When you change the interval, all the AM

preset stations are erased. To reset the interval,

repeat the same procedure.

Note

You cannot change the AM tuning interval in Power

Saving Mode (page 30).

Tips

• The preset stations are retained for about a day even

if you disconnect the power cord or if a power failure

occurs.

• To improve broadcast reception, adjust the supplied

antennas, or connect a commercially available

external antenna.

You can listen to a radio station either by

selecting a preset station, or by manually tuning

in the station.

Listening to a preset station

— Preset Tuning

Preset radio stations in the tuner’s memory first

(see “Presetting radio stations” on page 18).

1 Press TUNER BAND (or FUNCTION

repeatedly) to switch the function to

tuner.

2 Press TUNER BAND repeatedly to

select “FM” or “AM”.

3 Press TUNING MODE repeatedly until

“PRESET” appears in the display.

4 Press + or – (or TUNING + or – on the

unit) repeatedly to select the desired

preset station.

Listening to the radio

FrequencyPreset number

continued

20

GB

Listening to non-preset radio

station

— Manual Tuning

1 Press TUNER BAND (or FUNCTION

repeatedly) to switch the function to

tuner.

2 Press TUNER BAND repeatedly to

select “FM” or “AM”.

3 Press TUNING MODE repeatedly until

“AUTO” and “PRESET” disappear from

the display.

4 Press + or – (or TUNING + or – on the

unit) repeatedly to tune in the desired

station.

Note

When switching to CD function from tuner, a longer

time may be required to access the disc. In this case, set

“CD POWER ON” by CD power manage function

(page 19).

Tips

• To improve broadcast reception, adjust the supplied

antennas, or connect a commercially available

external antenna.

• When an FM stereo program has static noise, press

FM MODE repeatedly until “MONO” appears.

There will be no stereo effect, but the reception will

improve.

• Press TUNING MODE repeatedly until “AUTO”

appears in step 3 above, then press + or – (or

TUNING + or – on the unit). The frequency

indication changes and scanning stops when the

system tunes in a station (Automatic Tuning).

• To record the radio programs, use manual recording

(page 23).

Page is loading ...

Sony MHC-RV55 Operating instructions

This manual is also suitable for

Sony MHC-RV55 Operating instructions

Related papers

Other documents