Logic3 MIP199K User guide

Category
Docking speakers
Type
User guide

This manual is also suitable for

MIP199 User Manual
Thank you for purchasing the Logic3 i-Station Studio for use with iPod, the latest in our long and established range
of speakers. As with all Logic3 products, the i-Station Studio has been built to the highest manufacturing standards,
to bring you the very latest and advanced technology available. This product has been designed specifically to work
with iPod and has been certified by Logic3 to meet Apple performance standards.
Packaging Contents
i-Station Studio
Remote Control
Power Cable UK
Power Cable Euro
Line-In cable
Adaptor Cradles
Power
1. Connect the Power Cable to the AC connection on the back of the MIP199 and to your AC mains power
socket.
2. Press the POWER button on the top of the unit or the ‘I/ POWER’ button on the remote control to switch
the unit ON / OFF.
Set Clock
1. Switch the unit OFF
2. Press and hold the TIME button on the unit , the hours display will begin to flash
3. Press the PRESET button to switch between 12 and 24 hours clock mode
4. Press the TUNING + or - buttons on the unit or the ‘FF/TUNER+’, ‘RW/TUNER-’ buttons on the remote
control to adjust the hours.
5. Press the TIME button and the minutes display will begin to flash
6. Press the TUNING + or - buttons on the unit or the ‘FF/TUNER+’, ‘RW/TUNER-’ buttons on the remote
control to adjust the minutes
7. Press the TIME button on the unit or the remote control to set the time or if the unit is left idle for 15
seconds the selected time will be set automatically.
8. Press the PRESET button to switch between 12 and 24 hours clock mode
Listening to the Radio
1. With the unit switched ON, press the SOURCE button on the unit or remote control to select the FM or AM
Radio mode.
2. To manually scan through the radio frequencies, repeatedly press the TUNING + or - buttons on the unit or
the ‘RW/TUNER-’, ‘FF/TUNER+’ buttons on the remote control.
3. To automatically scan through the radio frequencies. Press and hold the TUNING + or - buttons on the unit
or the ‘RW/TUNER-’, ‘FF/TUNER+’ buttons on the remote control. The scan will automatically stop when
a strong signal is found.
4. The display will automatically show the set time if the unit is left idle for 5 seconds, to briefly view the
current radio station press the PRESET button on the unit or remote control.
Presetting Stations in the Radio Memory
The MIP199 can store up to 10FM and 10AM radio stations.
1. Select the frequency you want to store into the memory.
2. Press the ‘MEMORY’ button on the unit or remote control, ‘P01’ will begin to flash on the front display.
Press the TUNING + or - buttons on the unit or the ‘RW/TUNER-’, ‘FF/TUNER+’ buttons on the remote
control to select between presets ‘P01’ ‘P10’.
3. Press the ‘MEMORY’ button to store the frequency. The display will stop flashing to indicate the frequency
is now stored into the memory.
4. Press the SOURCE button to switch to theAM and FM bands and repeat the above procedure to store up
to 10AM or 10 FM frequencies into the memory.
Recalling Preset Stations
1. Press the ‘SOURCE’ button to select AM Radio or FM Radio.
2. Press and hold the PRESET button for 2 seconds
3. Press the TUNING + or - buttons on the unit or the ‘RW/TUNER-’, ‘FF/TUNER+’ buttons on the remote
control to select between the preset frequencies
Antenna
The unit has a built in FM Antenna, use the aerial wire at the back of the unit for the clearest possible FM
signal.
iPod
1. Remove the dock blanking plate on the top of the unit. Fit the appropriate dock cradle required for your
iPod. The MIP199 is provided with a selection of different universal dock cradles and 1 blanking plate for
use with other portable audio devices.
2. Dock your iPod onto the 30pin dock connection. Press the ‘SOURCE’ button to select the ‘iPod’ function.
The iPod symbol will appear on the front display.
3. The iPod will automatically begin to recharge.
4. Use the iPod click wheel to navigate between the iPod menu screens.
5. Use the remote control to control the play/pause, repeat, shuffle functions of the iPod wirelessly.
S-Video / Composite Video connections (iPod 5
th
Gen / iPod Photo compatible only)
1. Repeat above steps from 1 to 4.
2. Turn ON the “ TV Out ” option on your iPod.
3. Connect a S-Video or Composite cable (not supplied) from the back of the MIP199 to your TV.
4. Use the iPod to playback and view photos or videos on your TV.
Aux-In
The MIP199 can also be used as a speaker system in conjunction with a number of other portable audio devices
such as iPod shuffle, MiniDisc, MP3 Players or Portable CD Players.
1. Connect the included 3.5mm Audio-In cable into the headphone socket of your audio device and to the
‘LINE IN’ connection on the back of the unit.
2. Press the ‘SOURCE’ button to select the ‘AUX’ function. The ‘AUX’ symbol will appear on the front display.
3. You can now use the MIP199 to play sound from your external audio devices.
Adaptor Cradle
Number
iPod Model
Capacity
3 iPod mini 4GB & 6GB
4 4G iPod & U2 iPod 20GB
5 4G iPod 40GB
6 iPod Photo 20GB & 30GB
7 iPod Photo 40GB & 60GB
U1 Universal blanking plate
Please use cradle
supplied with iPod
iPod nano 1
st
Gen
iPod nano 2
nd
Gen
2GB, 4GB &
8GB
Please use cradle
supplied with iPod
5
th
Gen iPod with Video 30GB, 60GB &
80GB
Remote Control
Mute Control
1. Press the ‘MUTE’ button on the remote control, the audio music will switch off and the MUTE indicator will
appear on the front display.
2. To cancel the Mute function and restore the music press the MUTE button again or press the VOLUME + -
buttons on the unit or the remote control. The MUTE indicator will disappear.
Bass and Treble
1. Press the Bass + or buttons on the remote control to adjust the bass level of the unit, the bass level
ranges from -6 to +6. The Bass level will default to 0 if the power is disconnected.
2. Press the Treble + or buttons on the remote control to adjust the treble level of the unit, the treble level
ranges from -6 to +6. The Treble level will default to 0 if the power is disconnected.
Headphone
The MIP199 has a line out connection at the back of the unit, to allow you to connect headphones resulting in no
audio output from speakers at the front of the unit
Note : Always adjust the volume level to the minimum level before connecting your headphones into the system,
then adjust the volume level to your preference
Dimmer Control
The MIP199 has a 4 level dimmer for the front display when the unit is active. To control the brightness of the light
press and hold the ‘DIMMER’ button on the remote control.
iPod synchronization
The MIP199 offers the facility to allow data synchronization to your iPod by using iPod 30pin to USB Cable (not
supplied).
1. Connect a iPod 30 pin cable into the 30 pin dock connection port on the back of the MIP199.
2. Connect the USB connector to an available USB port on your PC.
3. The iPod will now be recognized as an external device to allow you to synchronize your iPod
Safety information
This lighting flash arrow symbol in a triangle alerts users to the
presence of non-insulated high voltage within the product's enclosure
that present an electrical shock hazard.
The exclamation point symbol in a triangle alerts users to the presence
of important operating and maintenance instructions in the literature
accompanying this product.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Should you have any connection or setup problems with the Logic3 MIP199 please contact our Technical Support
Hotline on +44 01923 471 000– National call rates apply or E-mail support@logic3.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Logic3 MIP199K User guide

Category
Docking speakers
Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI