Logic3 i-Station TimeCurve User manual

EN

i-Station TimeCurve (WIS195) - User Manual

Thank you for purchasing the Logic3 i-Station TimeCurve. As with all Logic3 products it has been built to the

highest manufacturing standards and tested throughout its development, to ensure you get the best possible

product. Please read through and familiarize yourself with this manual before you use the i-Station

TimeCurve.

Product Overview

Source

Time / Radio /

Sleep Display

AM/PM

Date

Day

Alarm Status

Month

Sleep Status

AC Adapter with Interchangeable

Plugs (Euro 2pin and BS 3pin)

TimeCurve

Set up of i-Station TimeCurve

1. Select and fit the correct plug adapter to suit your power supply (UK 3pin / Euro 2 Pin).

2. Connect the mains AC Adapter to the TimeCurve (DC in).

3. Plug the adapter to your mains supply and turn ON the power.

NOTE: For all iPhone/iPod touch models, please go to itunes and download the i-Station TimeCurve

APP before proceeding to set up.

Alarm

Time

Preset / Set

Power / Source

Volume Up

Volume Down

Tuning Up

Tuning Down

Snooze / Dimmer

Setting of Time/Date

1. Press and hold the ‘Time’’ button (Time will flash)

2. Using the ‘Volume button’ set the time format (24hr/12hr).

3. Press the ‘Preset/Set’ button (Hour Unit will Flash)

4. Using the ‘Tuning’ or ‘Volume’ buttons set the Hour.

5. Press the ‘Preset/Set’ button (Minutes Unit will Flash)

6. Using the ‘Tuning’ or ‘Volume’ buttons set the Minutes.

7. Press the ‘Preset/Set’ button (Year will flash)

8. Using the ‘Tuning’ or ‘Volume’ buttons set the Year.

9. Press the ‘Preset/Set’ button (Month will flash)

10. Using the ‘Tuning’ or ‘Volume ‘buttons set the Month.

11. Press the ‘Preset/Set’ button (Date will flash)

12. Using the ‘Tuning’ or ‘Volume’ buttons set the Date.

13. Press the ‘Preset/Set’ button (Day will flash)

14. Using the ‘Tuning’ or ‘Volume’ buttons set the Day.

15. Press the ‘Preset/Set’ button to save the settings.

Setting of Alarm

1. Press ‘Alarm’ button once, Volume and Source will flash on the display (if no buttons are pressed for

10seconds the display will return to the current time display).

2. Using the ‘Volume’ buttons set the volume level of the Alarm.

3. Press ‘Alarm’ button to set the Reccurence of the Alarm

4. Press ‘Power/Source’ button to set the source you wish to wake up to

5. Press the ‘Preset/Set’ button (Hour Unit will Flash)

6. Using the ‘Tuning’ or ‘Volume’ buttons set the Hour.

7. Press the ‘Preset/Set’ button (Minutes Unit will Flash)

8. Using the ‘Tuning’ or ‘Volume’ buttons set the Minutes

9. Press the ‘Preset/Set’ button to save the settings.

7 Days (Everyday Alarm is active)

5 Days (Mon-Fri Alarm is active)

OFF

Setting of Sleep mode

The Sleep time can be adjusted to the user’s preference.

1. In any source mode Press and hold the ‘Alarm’ button for 1second.

2. Sleep time will be displayed on the screen.

3. Using the ‘Tuning’ or ‘Volume’ buttons set the duration of the Sleep mode (OFF, 15, 30, 45, 60)

4. Once you have selected your Sleep time an icon will be displayed on the top right of the display.

5. Display will automatically return to the current time display after 10 seconds.

6. The Sleep time will be counted down, to show the remaining Sleep time press and hold the ‘Alarm’

button.

Setting the Radio

Only 6 Preset can be saved at any one time.

1. Un- tie the antenna cable and position the antenna as high up as possible.

2. Press and hold the ‘Power/Source’ button to turn on the Radio.

3. Select Radio by pressing the ‘Power/Source’ Button.

4. Using the ‘Tuning’ buttons set the required radio frequency (Pressing the ‘Tuning’ button once will

manually Tune the radio, Press and Hold the ‘Tuning’ button will Auto search the radio)

5. Press and hold the ‘Preset/Set’ button (Program number will then flash)

6. Using the ‘Tuning’ or ‘Volume’ buttons set the Program number you wish to save the radio station to.

7. Press the ‘Preset/Set’ button to save the settings.

To Recall a Preset Radio Station

1. Press the ‘Preset/Set’ Button and the Program number will appear on the display

2. Pressing the ‘Preset/Set’ button again will toggle through the Preset stations (P1, P2, P3, P4, P5, P6)

3. If no buttons are pressed for 10seconds the display will return to the current time display

Switching Off the Alarm/Snooze Function

1. Press the ‘Snooze/Dimmer’ button when the alarm is ringing, the alarm will be silenced for 5minutes.

2. To switch OFF the Alarm when the Alarm has gone off Press the ‘Power/Source’ button.

Selecting a source (iPhone/iPod, Radio or AUX)

1. Press the ‘Power/Source’ button.

2. Press the ‘Power/Source’ button again until you have selected your source

To adjust the Display dimmer level

1. Press the ‘Snooze/Dimmer’ button (when the alarm is not ringing), there are 3 levels of dimming.

Set Up of Line in

The i-Station TimeCurve also offers the ability to allow other portable audio devices such as iPod shuffle,

MP3, MiniDisc and Portable CD Players to be connected for use as a speaker system.

1. Connect a 3.5mm Audio-In cable (not included) into the headphone socket of your audio device and

to the ‘Line IN’ connection on the back of the unit.

2. Press the ‘Power/Source’ button to select the ‘AUX’ function. The ‘AUX’ symbol will appear on the

front display.

3. You can now use the WIS195 to play sound from your external audio devices.

NOTE: Remember to remove the line in cable when using the docking station as the line in cable will

override any sound coming from the docking station.

Hotel Mode

Press the ‘Alarm’ and the ’Volume Up Button simultaneously to toggle hotel mode operation.

Trouble Shooting

Problem

What Should I do?

FM Radio not clear / Radio station not found

Re-position the antenna cable until the station sounds clearer

Alarm is not ringing daily

Ensure the 7 or 5 day alarm setting is active (see Setting of

Alarm)

iPod/iPhone is not waking up as the Alarm

Ensure the Alarm source is set to iPod/iPhone (see Setting of

Alarm)

No Sound

Ensure the line in cable is not plugged into the rear of the

TimeCurve

Check Play status on the iPhone/iPod.

Please try updating the firmware for your iPhone/iPod using the

latest iTunes which is available from

www.apple.com/ipod/download

Spare Part List

Part

No.

Item code

Item Name

Price

1

YAD011B

AC ADAPTOR (UK 3PIN PLUG)

For prices visit our

website at

www.logic3.com

2

YAD011E

AC ADAPTOR (EURO 2PIN PLUG)

Please use Item Codes above, when searching for Spare Parts on our Website www.logic3.com

i-Station TimeCurve (WIS195) – FR Guide d’utilisation

Merci d’avoir choisi le i-Station TimeCurve de Logic3. À l’instar des autres produits Logic3, il répond aux

standards de fabrication les plus élevés. Les tests qu’il a subits tout au long de son développement vous

garantissent en outre le meilleur produit possible. Veuillez vous familiariser avec ce guide avant d’utiliser le i-

Station TimeCurve

Schéma du produit

Should you have any setup problems with the i-Station TimeCurve (WIS195) please contact our

Technical Support Hotline on +44 (01923) 471000 – National/International call rates apply or Email

[email protected]m - Spare parts are available for some models at our website www.logic3.com

Source

Heure / Radio /

Temps de

sommeil

Matin/Après-

Midi

Date

Jour

Statut de

l’alarme

Mois

Statut du

Sommeil

Adaptateur Secteur

avec prises interchangeables (Euro à 2 broches et

BS à 3 broches)

TimeCurve

Page is loading ...

Warning

Follow all operating and usage instructions

Do not submerge or use the i-Station in or near water

Do not disassemble any part of the i-Station

Do not place heavy objects on top of the i-Station

Do not allow small children to play with the i-Station unsupervised

Keep i-Station away from extreme temperatures and store away from dust and humidity

Unplug this product from the power source before cleaning

Do not use liquid or aerosol cleaner, use only a damp cloth for cleaning

For Spares/ Prices visit our website at www.logic3.com

Logic3 International Ltd. of Watford, UK is the owner of the Logic3 and i-Station registered trademarks as well as registered and

unregistered design rights and copyright subsisting in various products within its range. “Made for iPod” means that an electronic

accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance

standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iPod is a

trademark of Apple Inc., registered in the U.S. and other countries. All other trademarks, copyrights and trade names are registered

properties of their respective owners.Logic3 are continually updating their products in the interest of improving the quality and design.

As a result, some features and the appearance of the product may vary from those shown on this packaging. Copyright in this manual is

owned by Logic3 International Ltd. Rhodes Way,

Rhodes Way, Watford

WD24 4YW UK

Tel: +44 (0) 1923 471 000

Email: support@logic3.com

www.logic3.com

Logic3 plc WEEE Statement

Please help us to minimize the effect we have on the environment by recycling your waste electrical goods. For advise on all

aspects of recycling, including recycling of waste electronic equipment, please visit www.recycle-more.co.uk where you can find out

the locations of collection points near to you.

Logic3 i-Station TimeCurve User manual

Logic3 i-Station TimeCurve User manual

in other languages

Related papers

Other documents