Basic technical data sheet
G55JCR38
Stainless Steel
Code
Series
Use and installation info
Included with the product
Fasteners
90° Angle floor to wall stainless steel grab bar with outrigger and concealed
flange plates, right handed orientation. 1.25” diameter, 1.2mm wall thickness,
304 stainless steel.
Packaging information
8-1/8 x 31-1/2 x 34-1/2
Nylon bag in cardboard packaging
Type of package
Dimensions [WxDxH] In.
Weight lb.
Available colours
N1 Satin
Use
Wall installation
Clean using pure water and home disinfectants which have been sufficiently
diluted in water. Do not use abrasive detergents and trichloroethylene,
oxygenated water or acetone-based solvents.
Cleaning
331,00
88,00
Vertical lb.
In use weight capacity
Net weight lb.
8-1/16 x 31-1/2 x 34-1/2
Dimensions [WxDxH] In.
05/12/2011
Issued
29/04/2020
Revised
All herein data are subject to continuous technical updating. The manufacturer reserves the right to make change and
improvements to the product herein described without any previous notice.
© Ponte Giulio S.p.A. all rights reserved
US
/