Greenheck 459019 Latch Release Tool for Fire Dampers Operating instructions
- Type
- Operating instructions
Document Number 459019
Latch Release Tool for Fire Dampers
1. Insert tool as shown, near the end of the blade. Push
the tool against the blade and rotate.
2. To disengage the blade from the blade latch, pull the
tool until the blade is out of the latch.
3. While holding the released end of the blade out of the
blade latch. Repeat the process on the other end of
the blade until its released.
459019 • Latch Release Tool, Rev. 3, May 2019 Copyright 2019 © Greenheck Fan CorporationGFC
As a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications
without notice.
Product warranties can be found online at Greenheck.com, either on the specific product page or in the
literature section of the website at Greenheck.com/Resources/Library/Literature.
®
Phone: 715.359.6171 • Fax: 715.355.2399 • Parts : 800.355.5354 • E-mail: [email protected] • Website: www.greenheck.com
Our Commitment
-
1
Greenheck 459019 Latch Release Tool for Fire Dampers Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Greenheck 481945 Thermal Blanket Kit for DFD FD and FSD Series Operating instructions
-
-
-
-
-
-
-
-
-