2. Greenheck
  3. 459019 Latch Release Tool for Fire Dampers

Greenheck 459019 Latch Release Tool for Fire Dampers Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Greenheck 459019 Latch Release Tool for Fire Dampers Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Document Number 459019
Latch Release Tool for Fire Dampers
1. Insert tool as shown, near the end of the blade. Push
the tool against the blade and rotate.
2. To disengage the blade from the blade latch, pull the
tool until the blade is out of the latch.
3. While holding the released end of the blade out of the
blade latch. Repeat the process on the other end of
the blade until its released.
459019 • Latch Release Tool, Rev. 3, May 2019 Copyright 2019 © Greenheck Fan CorporationGFC
As a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications
without notice.
Product warranties can be found online at Greenheck.com, either on the specific product page or in the
literature section of the website at Greenheck.com/Resources/Library/Literature.
®
Phone: 715.359.6171 • Fax: 715.355.2399 • Parts : 800.355.5354 • E-mail: [email protected] • Website: www.greenheck.com
Our Commitment
/