DS-3E0516P-O
Gigabit PoE Switch
DS-3E0516P-O provides eight gigabit PoE RJ45 ports and eight gigabit RJ45 ports, which support line speed forwarding. With
simple and mini exquisite body, the switch is plug and play and easy to use, suitable for small-scale monitoring and other
simple network environments such as home, school, dormitory, and office.
8 × 1 Gbps PoE port,8 × 1 Gbps RJ45 port
Gigabit PoE and non-PoE ports for multiple use
Plug-and-play with easy connection
Built to last with a rugged metal case
Desktop/Wall-mounted installation available for any work environment
Specification
Model
DS-3E0516P-O
Network
Parameters
Ports
8 × 1 Gigabit PoE port,8 × 1 Gigabit RJ45 port
MAC Address Table
8 K
Switching Capacity
32 Gbps
Packet Forwarding Rate
23.81 Mpps
Internal Cache
4.1 Mbits
PoE Power
Supply
PoE Power Pin
End-span: 1/2(-), 3/6(+)
PoE Port
PoE: Ports 1 to 8
Max. Port Power
30 W
PoE Standard
IEEE 802.3at,IEEE 802.3af
PoE Power Budget
110 W
General
Shell
Metal material, fan-free design
Net Weight
1.418 kg (2.204 lb)
Gross Weight
0.62 kg (1.37 lb)
Dimensions (W × H × D)
286.0 mm × 103.35 mm × 27.8 mm (11.26'' × 4.07'' × 1.09'')
Operating Temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage Temperature
-40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity
5% to 95% (no condensation)
Power Supply
54 V DC, 2.22 A
Surge Protection
6 kV
Approval
EMC
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3:
2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
Safety
UL (UL 60950-1),CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition),
CE-LVD (EN 62368-1: 2014+A11: 2017)
Chemistry
CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
Available Model
DS-3E0516P-O
Typical Application
Physical Interface
Front Panel
Rear Panel
No.
Indicator/Port
Description
①
PoE-MAX
Indicator
Solid on/Flashing: The output power of the switch is about to reach or has reached the upper limit. The
power supply may be abnormal if more devices are connected.
Unlit: The switch does not supply power to a powered device (PD), or supplies power to a PD normally and
its output power does not reach the upper limit.（About five seconds after the output power of the switch
returns to normal, the PoE-MAX indicator will be unlit.）
②
LINK/ACT
Indicator
Solid on: The port is connected.
Flashing: The port is transmitting data.
Unlit: The port is disconnected or connection is abnormal.
③
PoE Indicator
Solid on: The switch supplies power to a PD normally.
Unlit: The switch is disconnected from a PD or power supply is abnormal.
④
PWR Indicator
Solid on: The switch is powered on normally.
Unlit: No power supply is connected or power supply is abnormal.
⑤
Gigabit PoE
RJ45 Port
Used for connection to a PD via a network cable.
⑥
Gigabit RJ45
Port
Used for connection to another device via a network cable.
⑦
Grounding
Terminal
Used for connection to a grounding cable to protect the switch from lightning.
⑧
Power Supply
Use the attached power adapter or power cord to connect the switch to a socket.
Dimension
/