2. MODWAY
  3. EEI-1629-BLK

MODWAY EEI-1629-BLK Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Table EEI-1629. This document includes parts and hardware lists, as well as step-by-step instructions with diagrams for assembling the table, including safety information. I'm ready to assist you with any questions you may have about assembling this table.
  • Should the screws be fully tightened immediately?
    What should be avoided when tightening the screws?
    Where should the hardware be kept?
ITEM DESCRIPTION
STEP 1
TABLE TOP
A
COMPLETED ASSEMBLY
TABLE LEG RIGHT(R)B
ASSEMBLY INSTRUCTIONS
PART LIST
QTYQTY ITEM DESCRIPTION
12 PCS
1 PC 1
HARDWARE LIST
2
3
2PCS
4
1
3
2
M5 ALLEN KEY
SPRING WASHER 5/16"
M8 x 40mm JCBB SCREW
M8 x 80mm JCBB SCREW
FLAT WASHER 5/16"
1 PC
16 PCS
4 PCS
4 PCS
5
x12 x4
4
532
A
L
R
R
L
Remark:R Leg comes with an extra small hole and no screw is
needed
TABLE LEG LEFT(L) 2PCS
C
B
B
C
C
EEI-1629
CAUTION :
1.Do not FULLY-TIGHTEN screws until they are all in place.
2.To prevent thread damage,do not over-tighten screws.
3.Hardware is to be kept out of reach from children.
Read this instruction carefully. Refer to the hardware and furniture parts
list for guidance. Be sure all parts are complete before assembling. Place
all wooden furniture parts on a clean and flat soft surface to prevent
scratches.
/