2. Optika
  3. Collaborate 55UHD

Optika Collaborate 55UHD Quick Manual

  • Hello! I've reviewed the provided quick guide for Optika Collaborate 55UHD and 65UHD displays. This document outlines the setup process, including cable connections and system requirements. It also mentions features such as the built-in USB hub and touch interface. I'm ready to answer any questions you have about these Optika displays.
  • What type of cable is recommended for the best 4K resolution?
    Do I need to install drivers for touch operation?
    What is the USB 3.0 port marked 'USB Source' used for?
    Can this display be left powered on all the time?
1
Quick Reference Guide
Quick Guide
Setting up your new Optika Collaborate Display- 55UHD, 65UHD
Getting Started
Your Opka Collaborate series display requires a host computer, DisplayPort, HDMI or DVI cable, device
power cable and a USB cable. DisplayPort and USB cables are included. Also included is an oponal USB
3.0 cable for operaon of the built-in USB 3.0 hub.
Depending on the graphics capabilies of your PC, Opka Display recommends the use of a DisplayPort
cable to facilitate full 4K (3840 x 2160) resoluon at 60Hz.
Some newer computers may also be equipped with an HDMI 2.0 ready port for full 4K at 60Hz.
Note: HDMI 1.4 is common, and capable of full 4K at 30Hz, which may introduce some lag in the per-
ceived touch experience.
2
Quick Reference Guide
Quick Guide
Connecting Cables to the 55UHD, 65UHD
1. Connect your display cable to the appropriate input. Opka recommends connecon via the DisplayPort
interface for most systems.
2. Connect the USB cable directly from the host computer to the touch interface marked “USB Touch” on
the back of the display.
3
Quick Reference Guide
Quick Guide
3. Connect the USB 3.0 cable from the port marked “USB Source” to the host computer.
4. Connect the power cable to the power port.
4
Quick Reference Guide
Quick Guide
Once plugged in, power on the display via the remote or display control
pad. Power will be indicated by a light above the buon pad.
Finally, turn on the host computer. The Opka Collaborate series is
designed to acvate the rst acve source while automacally cycling
through potenal inputs.
At inial startup the on screen display (OSD) will show the detected ac-
ve port, resoluon and frequency.
Note: The Opka Collaborate series works via standard HID interface and
no drivers are required for touch operaon.
Your display also includes a built in powered USB 3.0 hub to provide an easy to maintain connecon hub for a
variety of peripherals such as a camera, microphone, keyboard, mouse and other USB devices.
Each port will light when an acve USB peripheral is aached.
Note: You must aach the touch sensor USB cable directly to the host computer to ensure opmal perfor-
mance.
System Requirements
Windows 7/8/10
Linux
Android
Macintosh OSX 10.12 or greater
5
Quick Reference Guide
Quick Guide
Network Interface
You may control all of the display sengs of your Opka
Collaborate UHD Display via a built in web interface.
See the Network Operaon Guide for details. Display con-
trol is also available via serial RS-232 commands.
Usage
Your Opka Collaborate UHD Display is rated for 24/7 oper-
aon and may be le powered on at all mes.
Supported Resolutions
720 X 400 70 Hz 640 X 480 60 Hz
640 X 480 75 Hz 800 X 600 60 Hz
800 X 600 75 Hz 832 X 624 75 Hz
1024 X 768 60 Hz 1024 X 768 75 Hz
1280 X 720 60 Hz 1280 X 800 60 Hz
1280 X 1024 60 Hz 1280 X 1024 75 Hz
1600 X 900 60 Hz 1680 X 1050 60 Hz
1920 X 1080 60 Hz 3840 X 2160 60 Hz
Support
For Support call: 844-308-9813 (opon 3) or email sup-
port@opkadisplay.com
/