POWERFUL
WELDING &
ADVANCED
FEATURES AT
AN ATTRACTIVE
PRICE.
EMP/EM 210 Welding Machines
esab.com
ADVANCED
FEATURES
Pre-Gas & Post-Gas Time – Gas purge, improves arc start &
reduces porosity in weld
Wire Jog – Feeds wire through drive system without current
Variable Inductance – Improves arc stability and reduces spatter
Independent WFS, Amperage & Voltage control with manual
adjustment – Fine tuning for precise, repeatable welds
115/230V Dual Voltage – The power input to suit your on-job need
Cast Drive System – Precision wire feeding with rugged drive stand
Generator Friendly – On-the-go welding outdoors when supply power
is unavailable, 10kVA generator recommended
Arc Force Control – Adjustment of arc characteristics that helps
prevent the electrodes from sticking
ACCESSORIES
EMP 210 Accessories Include:
Tweco Fusion 180A MIG Torch – SKU# 1017-1338
Premium Ground Clamp – SKU# WS200G10
Victor Gas Regulator – SKU# 0781-9411b
Tweco Electrode Holder – SKU# WS200E13
Tweco 17V TIG Torch – SKU#W4013802
2 Ib Wire Spool (OK AristoRod 12.5) – SKU# 1A5008201MW
Optional Accessories: (Sold Separately)
Tweco Spool Gun 160A 3.6 m (12ft) – SKU# 1024-1397
TIG Remote Foot Pedal 4.6 m (15ft) – SKU# W4014450
EM 210 model does not
include TIG torch or Tweco
Electrode Holder
EMP 210
SPOOL GUN AUTO-DETECT
Welder automatically detects and adjusts to spool
gun configuration for greater productivity.
THERMAL PROTECTION
Advanced thermal protection safety measure
halts operation at unsafe temperature levels.
MULTI-PROCESS READY
TO WELD
Stick, MIG & TIG from a single power source
for greater productivity with less downtime.
DIGITAL INTERFACE DISPLAY
A bright and easy to view digital graphic display
provides visibility to current AMP setting even at a
distance. The large dial makes adjustments on the fly
quick and painless.
EASY TO ADJUST SETTINGS
Offers a range of advanced settings that are easily
adjustable including 2T/4T trigger control which
offers greater control over weld and reduces hand
fatigue when MIG welding.
ESAB EM 210 MIG and ESAB EMP 210
multi-process welders are compact, affordable
inverters that weigh just 29 lbs., but deliver
knockout performance on steel, stainless and
aluminum. With up to 200 amps of maximum
power and advanced controls you can take
your welding to the next level.
Visit esab.com to learn more.
SPECIFICATIONS
Model EM 210 EMP 210
Primary Voltage, 1 ph 115/230 VAC, ± 15%, 50/60 Hz 115/230 VAC, ± 15%, 50/60 Hz
Supply Voltage Range 97 – 132 VAC / 195 – 265 VAC 97 – 132 VAC / 195 – 265 VAC
MIG (GMAW)
Welding Output
115V: 90A/18.5V @40%, 57A/16.9V @100%
230V: 200A/24V @15%, 77A/17.9V @100%
115V: 90A/18.5V @40%, 57A/16.9V @100%
230V: 200A/24V @15%, 77A/17.9V @100%
STICK (SMAW)
Welding Output -115V: 70A/22.8V @40%, 44A/21.8V @100%
230V:170A/26.8V @20%, 66A/22.6V @100%
Lift TIG (GTAW)
Welding Output -115V:90A/13.6V @40%, 57A/12.3V @100%
230V:200A/18V @15%, 77A/13.1V @100%
Current Range 30 – 200 Amps 10 – 200 Amps
MIG (GMAW) Welding
Voltage Range 115V: 12V-20V 230V: 12V-24V 115V: 12V-20V 230V: 12V-24V
Maximum Input Current 27.2 – 40 A 20 – 40 A
Nominal OCV Volt/DC 68 VDC 68 VDC
Maximum
Plate Thickness 3/8 in. (9.5 mm) @ 230V 3/8 in. (9.5 mm) @ 230V
Wire Dimensions
Mild Steel
Stainless Steel
Aluminum
Cored Wire
.024 – .030 in. (0.6 – 0.8 mm)
.024 – .030 in. (0.6 – 0.8 mm)
.030 – .035 in. (0.8 – 0.9 mm)
.030 – .035 in. (0.8 – 0.9 mm)
.024 – .030 in. (0.6 – 0.8 mm)
.024 – .030 in. (0.6 – 0.8 mm)
.030 – .035 in. (0.8 – 0.9 mm)
.030 – .035 in. (0.8 – 0.9 mm)
Wire Feed Speed 80 – 450 ipm (2 – 11 m/min) 80 – 450 ipm (2 – 11 m/min)
Wire Spool Capacity 4 & 8 in., (100 & 200 mm), 2–11 lbs (1–5 kg) 4 & 8 in., (100 & 200 mm), 2–11 lbs (1–5 kg)
Lead Cord 14 A WG NEMA 5-20P, 10 ft (3 m) rubber 14 A WG NEMA 5-20P, 10 ft (3 m) rubber
Protection Class IP21S IP21S
Certication Mark
(Standards) CSA CSA
Warranty 3 year 3 year
Dimensions L x W x H 15 x 8.7 x 19.2 in. (381 x 221 x 487 mm) 15 x 8.7 x 19.2 in. (381 x 221 x 487 mm)
Weight 28.7 lbs (13 kg) 28.7 lbs (13 kg)
1) EM 210 package includes: Power Source,
Tweco Fusion 180 Velocity MIG Gun with
Tweco Connection & Velocity Consumables,
Ground Clamp, Argon/CO2 Regulator,
Power Adaptor and Sample Wire Spool.
2) EMP 210 package includes: Power
Source, Tweco Fusion 180 Velocity MIG
Gun with Tweco Connection & Velocity
Consumables, Tweco 17V TIG Torch with
50 mm Dinse and Accessory Kit, Tweco
Electrode Holder, Ground Clamp, Argon/CO2
Regulator, Power Adaptor and Sample
Wire Spool.
ORDERING INFORMATION
EM 210 MIG 200A
Weld System 10700501200
EMP 210 MP 200A
Weld System w/ TIG 20700503200
XA00236221 / NA / EN / 09-22-21
ESAB / esab.com
ESAB EM210 and EMP210 welding systems, like every ESAB
machine,
is backed by our commitment to superior customer service
and support.
Our skilled customer service department is prepared to quickly answer
any questions, address problems, and help with maintenance and
upgrading of machines.
For more information, visit esab.com.
100% SATISFACTION GUARANTEE.
If there’s anything you’re not completely satised with in your rst 100 days
with your new welder, ESAB will
make it right, even if it means giving you your
money back.
It’s all part of our Iron Clad Pledge to our customers.
UNRIVALED
SERVICE AND
SUPPORT.
/
