2. Baxton Studio
  3. Pita-Black Velvet-Daybed-Twin

Baxton Studio Pita-Black Velvet-Daybed-Twin Assembly Instructions

  • Hello! I'm a chat assistant, and I've reviewed the assembly instructions for the Pita Daybed. This document provides a step-by-step guide, clearly outlines the required parts, hardware, and tools, and includes visual aids to help you assemble the daybed. I'm ready to answer any questions you might have about the assembly process!
  • What is the first step in the assembly?
    What step includes attaching the Front Rail and Back Rail?
    What is required to attach the Back Panel?
QTY
M4 x 32MM
SCREW
NO PARTLIST
STEP 4
STEP 2
STEP 3
M8 x 20MM
JCBB SCREW
C
D
A
12PCS
HARDWARE
4PCS
4PCS
B
ITEM QTY
2SETS
4PCS
1PC
1PC
FRONT RAIL
BACK RAIL
LEG
SLAT
SIDE PANEL (L)
SIDE PANEL (R)
1
BACK PANEL
7
6
5
4
3
2
1PC
1PC
1PC
L - KEY
8PCS
JCBC SCREW
L - KEY
M6 x 50MM
M4 x 100MM
M5 x 65MM
JCBC SCREW
M6 x 12MM
SPRING WASHER
FLAT WASHER
M6 x 19MM
STEP 1
M6 x 15MM
4PCS
E
8PCS
F
1PC
G
1PC
H
ASSEMBLY
COMPLETED
2
3R
L
B
G
6
4
2
5
3
A
H
EDCG
1
3
3
2
1
7
F
7
Begin assembly by attaching each Leg (6) to the bottom of Right Arm (2)
& Left Arm (3) by securing with 3 Allen Bolts (B) per leg using L - key (G).
Attach the Front Rail (4) and Back Rail (5) to the Left Side Panel (2) and
Right Side Panel (3). Aligning the holes and securing with 2 Allen Bolts (A)
per each end by using L-Key (H).
(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP.)
Attach the Back Panel (1) to the Left Side Panel (2) and Right Side Panel (3),
and securing with 2 Allen Bolts (C), 2 Spring Washer (D), 2 Flat Washer (E)
each side of the Back Panel by using L-Key (G).
Tighten all Bolts on step 2 by using the L-Key (H) and following step 3 using
L-Key (G) that has been provided. Attach Slats (7) to the Front Rail (4) and
Back Rail (5) by unrolling and securing with 2 Screws (F) per each side.
Tighten all screws using philips head screwdriver (NOT INCLUDED).
ITEM : PITA DAYBED
/