Copyright
This publication, including all photographs, illustrations and software, is protected under international
copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may
be reproduced without written consent of the author.
© Copyright 2013
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no
representations or warranties with respect to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to
revise this publication and to make changes from time to time in the content hereof without obligation of
the manufacturer to notify any person of such revision or changes.
Trademark Recognition
Kensington is a U.S. registered trademark of ACCO Brand Corporation with issued registrations
and pending applications in other countries throughout the world.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
is a trad
emark of SRS Labs, Inc. WOW technology is incorporated under license from
SRS Labs, Inc.
WOW® significantly improves the playback quality of audio, delivering a dynamic 3D
entertainment experience with deep rich bass.
Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. IBM
is a trademark or registered trademark of International Business Machines, Inc. Microsoft, PowerPoint,
and Windows are trademarks or registered trademarks of Microsoft Corporation. Adobe and Acrobat are
trademarks or registered trademarks of Adobe Systems Incorporated. DLP®, DLP Link and the DLP logo
are registered trademarks of Texas Instruments and BrilliantColor™ is a trademark of Texas Instruments.
InFocus, In Focus, and INFOCUS (stylized) are either registered trademarks or trademarks of InFocus
Corporation in the United States and other countries.
All other product names used in this manual are the properties of their respective owners and are
acknowledged.
— i —
IN8606HD User’s Manual
–ii –
Important Safety Information
Important:
It is strongly recommended that you read this section carefully before using the projector. These
safety and usage instructions will ensure that you enjoy many years of safe use of the projector.
Keep this manual for future reference.
Symbols Used
Warning symbols are used on the unit and in this manual to alert you of hazardous situations.
The following styles are used in this manual to alert you to important information.
Note:
Provides additional information on the topic at hand.
Important:
Provides additional information that should not be overlooked.
Caution:
Alerts you to situations that may damage the unit.
Warning:
Alerts you to situations that may damage the unit, create a hazardous environment, or cause
personal injury.
Throughout this manual, component parts and items in the OSD menus are denoted in bold font as in this
example:
“Push the Menu button on the remote control to open the Main menu.”
General Safety Information
Do not open the unit case. Aside from the projection lamp, there are no user-serviceable parts in
the unit. For servicing, contact qualified service personnel.
Follow all warnings and cautions in this manual and on the unit case.
The projection lamp is extremely bright by design. To avoid damage to eyes, do not look into the
lens when the lamp is on.
Do not place the unit on an unstable surface, cart, or stand.
Avoid using the system near water, in direct sunlight, or near a heating device.
Do not place heavy objects such as books or bags on the unit.
Preface
Projector Installation Notice
Place the projector in a horizontal position
The tilt angle of the projector should not exceed 15 degrees. In addition, the projector should
not be installed in any other way except desktop and ceiling mount positions. Otherwise lamp life
could decrease dramatically, and may lead to other unpredictable damage.
Allow at least 50 cm (16.69 inch) clearance around the exhaust vent.
(19.69 inch) (19.69 inch) (19.69 inch)
(3.94 inch)
(11.81 inch)
(19.69 inch)
Ensure that the intake vents do not recycle hot air from the exhaust vent.
When operating the projector in an enclosed space, ensure that the surrounding air temperature
within the enclosure does not exceed operation temperature while the projector is running, and the
air intake and exhaust vents are unobstructed.
All enclosures should pass a certified thermal evaluation to ensure that the projector does not
recycle exhaust air, as this may cause the device to shutdown even if the enclosure temperature is
with the acceptable operation temperature range.
–iii –
IN8606HD User’s Manual
Power Safety
Only use the supplied power cord.
Do not place anything on the power cord. Place the power cord where it will not be in the way of
foot traffic.
Remove the batteries from the remote control when storing or not in use for a prolonged period.
Replacing the Lamp
Replacing the lamp can be hazardous if done incorrectly. See Replacing the Projection Lamp on page 36
for clear and safe instructions for this procedure. Before replacing the lamp:
Unplug the power cord.
Allow the lamp to cool for about one hour.
Cleaning the Projector
Unplug the power cord before cleaning. See Cleaning the Projector page 39.
Allow the lamp to cool for about one hour.
Regulatory Warnings
Before installing and using the projector, read the regulatory notices in the Regulatory Compliance on
page 51.
Important Recycle Instructions:
Hg
Lamp(s) inside this product contain mercury. This product may contain other electronic waste that
can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal
Laws. For more information, contact the Electronic Industries Alliance at WWW.EIAE.ORG
. For lamp
specific disposal information check WWW.LAMPRECYCLE.ORG.
Symbol Explanations
DISPOSAL: Do not use household or municipal waste collection services for
disposal of electrical and electronic equipment. EU countries require the use
of separate recycling collection services.
About this Manual
This manual is intended for end users and describes how to install and operate the DLP projector.
Wherever possible, relevant information—such as an illustration and its description—has been kept on
one page. This printer-friendly format is both for your convenience and to help save paper, thereby
protecting the environment. It is suggested that you only print sections that are relevant to your needs.
–iv –
Preface
–v –
Table of Contents
GETTING STARTED........................................................................................................................................................... 1
PACKING CHECKLIST ........................................................................................................................................................... 1
VIEWS OF PROJECTOR PARTS............................................................................................................................................... 2
Front-right View ............................................................................................................................................................ 2
Top view—On-screen Display (OSD) buttons and LEDs....................................................................................... 3
Rear view....................................................................................................................................................................... 4
Bottom view................................................................................................................................................................... 6
REMOTE CONTROL PARTS ................................................................................................................................................... 7
REMOTE CONTROL OPERATING RANGE............................................................................................................................... 9
PROJECTOR AND REMOTE CONTROL BUTTONS.................................................................................................................... 9
SETUP AND OPERATION............................................................................................................................................... 10
INSERTING THE REMOTE CONTROL BATTERIES ................................................................................................................. 10
TURNING THE PROJECTOR ON AND OFF .............................................................................................................................. 11
SETTING AN ACCESS PASSWORD (SECURITY LOCK) .......................................................................................................... 13
ADJUSTING THE PROJECTOR LEVEL ................................................................................................................................... 15
ADJUSTING THE ZOOM, FOCUS AND KEYSTONE ................................................................................................................ 16
ADJUSTING THE VOLUME .................................................................................................................................................. 16
ON-SCREEN DISPLAY (OSD) MENU SETTINGS ...................................................................................................... 17
OSD MENU CONTROLS ..................................................................................................................................................... 17
Navigating the OSD ................................................................................................................................................... 17
SETTING THE OSD LANGUAGE .......................................................................................................................................... 18
OSD MENU OVERVIEW ..................................................................................................................................................... 19
IMAGE MENU..................................................................................................................................................................... 20
Computer Menu.......................................................................................................................................................... 21
Advanced Features.................................................................................................................................................... 22
White Balance............................................................................................................................................................. 23
Color Manager ............................................................................................................................................................ 24
SETTINGS 1 MENU ............................................................................................................................................................. 25
Audio ............................................................................................................................................................................ 26
Advanced 1 Features................................................................................................................................................. 27
Advanced 2 Features................................................................................................................................................. 29
SETTINGS 2 MENU ............................................................................................................................................................. 30
Status ........................................................................................................................................................................... 31
Advanced 1 Features................................................................................................................................................. 32
Advanced 2 Features................................................................................................................................................. 34
MAINTENANCE AND SECURITY .................................................................................................................................. 36
REPLACING THE PROJECTION LAMP................................................................................................................................... 36
Resetting the Lamp Timer......................................................................................................................................... 38
CLEANING THE PROJECTOR................................................................................................................................................ 39
Cleaning the Lens ...................................................................................................................................................... 39
Cleaning the Case...................................................................................................................................................... 39
USING THE CABLE LOCK SYSTEM AND SECURITY BAR ..................................................................................................... 40
Using the Cable Lock................................................................................................................................................. 40
Using the Security Bar............................................................................................................................................... 40
TROUBLESHOOTING...................................................................................................................................................... 41
COMMON PROBLEMS AND SOLUTIONS ............................................................................................................................... 41
TIPS FOR TROUBLESHOOTING ............................................................................................................................................ 41
LED ERROR MESSAGES..................................................................................................................................................... 42
IMAGE PROBLEMS.............................................................................................................................................................. 42
LAMP PROBLEMS ............................................................................................................................................................... 43
REMOTE CONTROL PROBLEMS .......................................................................................................................................... 43
AUDIO PROBLEMS ............................................................................................................................................................. 44
HAVING THE PROJECTOR SERVICED .................................................................................................................................. 44
HDMI Q & A .................................................................................................................................................................... 45
IN8606HD User’s Manual
–vi –
SPECIFICATIONS............................................................................................................................................................. 46
SPECIFICATIONS................................................................................................................................................................. 46
PROJECTION DISTANCE VS. PROJECTION SIZE.................................................................................................................... 47
Projection Distance and Size Table......................................................................................................................... 47
TIMING MODE TABLE ........................................................................................................................................................ 48
PROJECTOR DIMENSIONS ................................................................................................................................................... 50
REGULATORY COMPLIANCE....................................................................................................................................... 51
FCC WARNING .................................................................................................................................................................. 51
CANADA ............................................................................................................................................................................ 51
SAFETY CERTIFICATIONS ................................................................................................................................................... 51
APPENDIX I........................................................................................................................................................................ 52
SERIAL COMMUNICATION.................................................................................................................................................. 52
IN8606HD User’s Manual
– 1 –
GETTING STARTED
Packing Checklist
Carefully unpack the projector and check that the following items are included:
DLP PROJECTOR WITH LENS CAP
R
EMOTE CONTROL
(B
ATTERIES NOT INCLUDED
)
HDMI
CABLE POWER CORD
CD-ROM
(T
HIS USER’S MANUAL)
Q
UICK START GUIDE WARRANTY CARD
Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It
is recommended that you keep the original packing material in case you ever need to return the
equipment for warranty service.
Caution:
Do not place the project in direct sunlight, humid, greasy or dusty places or in places where the
projector may come into contact with smoke or steam.
IN8606HD User’s Manual
Views of Projector Parts
Front-right View
12
3
4
5
ITEM LABEL DESCRIPTION SEE PAGE
1.
IR receiver Receive IR signal from remote control
2.
Lens Projection Lens
3.
Focus ring Focuses the projected image
4.
Zoom ring Enlarges the projected image
16
5.
Function keys
See Top view—On-screen Display (OSD) buttons
and LEDs.
3
Important:
Do not block ventilation openings. Locate the projector in a well-ventilated area without obstructions
to intake or exhaust vents. Do not place the projector on a tablecloth or other soft covering that may
block the vents. Ventilation openings on the projector allow for good air circulation.
–2 –
IN8606HD User’s Manual
Top view—On-screen Display (OSD) buttons and LEDs
3
1
2
ITEM LABEL DESCRIPTION SEE PAGE
1.
Turns the projector On and Off
Red Lamp Failure
2.
LAMP LED
Blinking Red Error code
Blue
Projector is in standby or is fully
powered on (lamp is lit).
3.
POWER LED
Blinking Blue
Projector is initializing or cooling down. It
can also indicate an error code when
blinking in conjunction with the Lamp LED.
42
– 3 –
IN8606HD User’s Manual
Rear view
12
10
3
456 7 9
11
12
13
14
1516
8
ITEM LABEL DESCRIPTION SEE PAGE
1.
AC IN Connect a POWER cable
11
2.
3D SYNC
Connect the 3D IR glasses transmitter
(Note: For Specific 3D IR glasses only)
3.
HDMI 1 Connect an HDMI cable from a HDMI device
4.
HDMI 2 Connect an HDMI cable from a HDMI device
5.
(USB)
Service use only.
6.
VGA IN Connect a RGB cable from a computer
7.
RS-232C Connect a RS-232 serial port cable for remote control
8.
COMPONENT Connect a Component cable from a component device
9.
USB POWER This USB Type A connector provides 5V DC power support.
10.
Kensington Lock
Secure to a permanent object with a Kensington®
Lock system
40
11.
VIDEO IN Connect a COMPOSITE cable from a video device
12.
AUDIO IN (L and R) Connect an AUDIO cable from an audio device
13.
S-VIDEO Connect a S-VIDEO cable from a video device
14.
AUDIO IN Connect an AUDIO cable from an audio device
15.
AUDIO OUT Connect an AUDIO cable to an audio amplifier
16.
DC 12V TRIGGER
When connected to the screen through a commercially available cable,
the screen deploys automatically on start up of the projector. The screen
retracts when the projector is powered off (see notes on next page).
–4 –
IN8606HD User’s Manual
– 5 –
DC12V Trigger Note:
To use this feature, you must plug in the connector before turn on/off the projector.
Screen controllers are supplied and supported by screen manufacturers.
Do not use this jack for anything other than intended use.
Connectivity Note:
If your video equipment has multiple connection options, please note that HDMI provides the
highest quality image, followed by Component and then S-video. Composite provides the least
quality image.
Warning:
As a safety precaution, disconnect all power to the projector and connecting devices before making
connections.
IN8606HD User’s Manual
Bottom view
100.0mm
146.0mm
68.7mm
75.0mm
175.0mm
173.9mm
40.8mm
4.5mm
(6.89inch)
(3.94inch)
(2.95inch)
(0.18inch
)
(5.75inch)
(
2.70inch
)
(6.85inch)
(1.61inch)
ITEM LABEL DESCRIPTION SEE PAGE
1.
Ceiling support holes
Contact your dealer for information on mounting the projector on a
ceiling
2.
Tilt adjustor Rotate adjuster lever to adjust angle position.
15
Note:
If you are installing the projector on the ceiling, we strongly recommend using InFocus approved
ceiling mounts for proper fitting, ventilation and installation. Refer to the installation guide that
comes with the InFocus Ceiling Mount kit for more information. The warranty does not cover any
damage caused by use of non-approved ceiling mount kits or by installing in an improper location.
–6 –
IN8606HD User’s Manual
Remote Control Parts
12
3
4
5
6
7
89
10
11
12
13
14
15
Important:
1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency
fluorescent lights can disrupt remote control operation.
2. Be sure nothing obstructs the path between the remote control and the projector. If the path
between the remote control and the projector is obstructed, you can bounce the signal off certain
reflective surfaces such as projector screens.
3. The buttons and keys on the projector have the same functions as the corresponding buttons on
the remote control. This user’s manual describes the functions based on the remote control.
– 7 –
IN8606HD User’s Manual
–8 –
ITEM LABEL DESCRIPTION SEE PAGE:
1.
Up Navigates up and changes settings in the OSD
2.
Enter Changes settings in the OSD
17
3.
Power Turns the projector on or off
11
4.
Right Navigates to the right and changes settings in the OSD
5.
Volume + Increases volume
6.
Volume - Decreases volume
16
7.
Mute Mutes the built-in speaker
8.
Freeze Freeze/unfreezes the on-screen picture
9.
Source Selects the input device
10.
Auto Auto adjustment for frequency, tracking, size, position (RGB only)
11.
Keystone top
Corrects keystoning of the image (when it is wider on
top)
12.
Keystone bottom
Corrects keystoning of the image (when it is wider on
the bottom)
16
13.
Down Navigates down and changes settings in the OSD
14.
Left Navigates to the left and changes settings in the OSD
15.
Menu Opens and exits the OSD
17
IN8606HD User’s Manual
– 9 –
Remote Control Operating Range
The remote control uses infrared transmission to control the projector. It is not necessary to point the
remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or
the rear of the projector, the remote will function well within a radius of about 7 meters (23 feet) and
15 degrees above or below the projector level. If the projector does not respond to the remote control,
move a little closer.
Projector and Remote Control Buttons
The projector can be operated using the remote control. All operations can be carried out with the
remote control.
IN8606HD User’s Manual
–10 –
SETUP AND OPERATION
Inserting the Remote Control Batteries
1.
Remove the battery compartment
cover by sliding the cover in the
direction of the arrow (A). Pull out the
cover (B).
2.
Insert the battery with the positive
side facing up.
3.
Replace the cover.
Caution:
1. Only use a 3V lithium battery (CR2025).
2. Dispose of used batteries according to local ordinance regulations.
3. Remove the batteries when not using the projector for prolonged periods.
Note:
Batteries are not normally included with InFocus projectors.
IN8606HD User’s Manual
Turning the projector on and off
1.
Connect the power cord to the
projector. Connect the other end to
a wall outlet.
The
POWER LED on the
projector light.
2.
Turn on the connected devices.
3.
Ensure the POWER LED is not
flashing. Then press the
POWER
button to turn on the projector.
The projector splash screen displays
and connected devices are
detected.
See Setting an Access Password
(Security Lo
ck) on page 13 if the
security lock is enabled.
4.
If more than one input device is
connected, press the SOURCE
button and use ▲▼ to scroll among
the devices.
(Component is supported using a
RGB to COMPONENT ADAPTER.)
VGA: Analog RGB
Component Video: Traditional component video
Composite Video: Traditional composite video
S-Video: Super video (Y/C separated)
HDMI 1 / HDMI 2: High-Definition Multimedia
Interface
– 11 –
IN8606HD User’s Manual
5.
To turn the projector off, press the
POWER button. When the “Power
Off? Press Power again” message
appears, press the POWER button.
The projector turns off.
Caution:
1. Be sure to remove the lens cap before starting projector.
2. Do not unplug the power cord until the POWER LED stops flashing–indicating the projector has
cooled down.
–12 –
IN8606HD User’s Manual
Setting an Access Password (Security Lock)
You can use the four arrow buttons on the remote to set a password and prevent unauthorized
use of the projector. When enabled, the password must be entered after you power on the projector.
(See Navigating the OSD on page 17 and Setting the OSD Language on page 18 for help on using
OSD menus.)
Important:
Keep the password in a safe place. Without the password, you will not be able to use the projector.
If you lose the password, contact InFocus Support for information on clearing the password.
1.
Press the MENU button to open the
OSD menu.
2.
Press the ◄► buttons to move to the
Settings 1 menu. Press the ▲▼
buttons to select Advanced 1.
3.
Press (Enter) or ► to enter the
Advanced 1 sub menu. Press the
▲▼ buttons to select Security Lock.
4.
Press the ◄► buttons to enter and
enable or disable security lock
function.
A password dialog box automatically
appears.
– 13 –
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/