Furinno 12095 Installation guide

Type
Installation guide
1
8
Recomm. 2 Person
Approx. 30 minutes
Tool RequiredTool Required
Assembly Instruction
Furinno Econ Multipurpose Home Office
Computer Writing Desk w/Bin
MODEL : 12095
Customer Support
www.furinno.com
NEED HELP? For replacement requests or product inquiries,
please contact our Customer Service Team by emailing us at
[email protected]. Thank you for selecting Furinno!
Recommended Maximum Weight
Unfold Bin (9) and slide into the shelf.
STEP 14
Attach Back Panel (M) to the back of
assembled unit using Power Pin (6).
STEP 13
(6)x12pcs
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
*Unit in pound (lbs)
10
15
10
1209520180414
(9)
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
A
1pc
Top Panel 1
No QtyParts List
B
C
1pc
1pc
Left Side Panel
Top Panel 2
D
E
F
1pc
1pc
1pc
Top Support Panel 1
Right Side Panel
Side Support Panel
G
H
1pc
1pc
Bottom Side Panel
Top Support Panel 2
I
J
K
1pc
1pc
1pc
Back Panel
Shelf Panel
Bottom Panel
L
M
1pc
1pc
Back Cover
Keyboard Panel
9
F
G
K
M
L
L
J
I
A
B
C
D
E
H
1
2
3
18pcs
12pcs
6pcs
Nail Leg
No Hardware List Qty
Screw
Dowel
4
5
6
7pcs
7pcs
12pcs
Power Pin
Cam-Lock Nut
Cam-Lock Screw
7
8
9
1set
8pcs
1pc
Non-Woven Bin
Drawer Slide
Keyboard Screw
2
7
STEP 11
Attach Panel (A) to Panel (C)&(D) and tighten Cam-Lock Nut (4) using screwdriver.
STEP 12
12.1 Upright the unit and slide in Keyboard Panel (L).
12.2 Attach Panel (B) to Panel (E)(F)&(G) and tighten Cam-Lock Nut (4) using
screwdriver.
3
6
STEP 2
Install Nail Leg (3) to the bottom of
Panel (C)(D)&(H) using rubber mallet.
Screw Cam-Lock Screw (5) into
the pre-drilled holes on Panel (A)(B)&(I).
STEP 3
STEP 1
Insert Dowel (2) and Cam-Lock Nut (4) into the pre-drilled holes on Panel
(C,D,E,F,G&H).
(5)x7pcs
(4)x2pcs
(2)x2pcs
Arrow on Cam-Lock
Nut (4) should be
pointing towarcls
holes.
4
(3)x2pcs
STEP 10
10.1 Attach Panel (G) to Panel (F) using Screw (1).
10.2 Attach Panel (F)&(G) to Panel (A) using Screw (1).
STEP 9
Attach Panel (C) to the assembled unit using Screw (1).
(1)x2pcs
(1)x4pcs
(1)x4pcs
4
5
STEP 5
Fix Drawer Slide (7) to Panel (C)&(D) using Screw (8).
Note: Please make sure L&R Side of Drawer Slide (7) before attach it.
STEP 4
Fix Drawer Slide (7) to Panel (L) using Screw (8).
Note: Please make sure L&R Side of Drawer Slide (7) before attach it.
(8)x4pcs
(8)x4pcs
Front Side
STEP 8
Attach the assembled unit to Panel (D)&(K) using Screw (1), as shown.
STEP 6
Attach Panel (E) to Panel (I) using
Screw (1).
STEP 7
Attach Panel (J) to Panel (H) using
Screw (1) and tighten Cam-Lock Nut (4)
on Panel (H) using screwdriver.
(1)x6pcs
(1)x2pcs
(1)x2pcs
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Furinno 12095 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI